[Zurück]


Zeitschriftenartikel:

T. Daxner, F. G. Rammerstorfer, F.D. Fischer:
"Instability Phenomena During the Conical Expansion of Circular Cylindrical Shells";
Computer Methods in Applied Mechanics and Engineering, 194 (2005), S. 2591 - 2603.



Kurzfassung englisch:
Pushing a conical die into a tube is a forming process that is suitable for changing the shape of a thin cylindrical tube into that of a conical shell. The degree of expansion that is achievable without destroying the tube is limited by two mechanisms: (a) loss of global stability due to elasto-plastic 'concertina' buckling of the straight part of the tube, and (b) diffuse necking caused by local loss of material stability in the conical part of the tube. The former mechanism is characterized by a periodic buckling pattern that is similar to the one observed in typical crash elements, while the latter mechanism leads to the formation of periodic necks and subsequent failure of by strain localization and rupture.

In this study experimental evidence for both kinds of instabilities is presented along with corresponding simulation results obtained with the finite element method. For long tube specimens 'concertina' buckling was found to be the dominant instability mode while for short tube specimens failure by necking and rupture occurred. The critical circumferential strain for the onset of necking at the expanded tube end was markedly higher than the one expected from uniaxial tension results. This finding is attributed to the supporting effect of the tube sections that are subjected to lower strains.


"Offizielle" elektronische Version der Publikation (entsprechend ihrem Digital Object Identifier - DOI)
http://dx.doi.org/10.1016/j.cma.2004.07.047

Online-Bibliotheks-Katalog der TU Wien:
http://aleph.ub.tuwien.ac.at/F?base=tuw01&func=find-c&ccl_term=AC05936624



Zugeordnete Projekte:
Projektleitung Franz G. Rammerstorfer:
Konisches Aufweiten von Zylinderschalen


Erstellt aus der Publikationsdatenbank der Technischen Universität Wien.