TU Home
This publication list has been generated automatically from the publication data of the Faculty of Mechanical and Industrial Engineering. Please invoke the page "Publications of the Faculty" directly for more complex searches and queries, or use the global search function of the Publication Database of the Vienna University of Technology!


Publication Database Home  

Publication list for members of
E311 - Institute of Production Engineering and High Power Laser Technology
as authors or essentially involved persons

1464 records (1979 - 2014)

The complete list of publications of the Faculty of Mechanical and Industrial Engineering is available from the publication database beginning with the publication year 2002. The database may but need not necessarily contain publications dated earlier than 2002.


Books and Book Editorships


  1. Authors: Stanislaw Adamczak; Peter Herbert Osanna, E311 - AuM

    S. Adamczak, P.H. Osanna (ed.):
    "SCIENCE REPORT Computer-Aided Systems for Manufacture and Measurement of Machine Elements";
    Wydawnictwo, Kielce, PL, 2003, ISBN: 83-88906-30-5; 320 pages.

  2. Authors: Stanislaw Adamczak; Peter Herbert Osanna, E311 - AuM

    S. Adamczak, P.H. Osanna (ed.):
    "SCIENCE REPORT Measuring Technology in Advanced Machine Manufacturing Systems";
    Wydawnictwo, Kielce, PL, 2004, ISBN: 83-88906-65-8; 252 pages.

  3. Authors: Ali Afjehi-Sadat, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM

    A. Afjehi-Sadat, M.N. Durakbasa, P.H. Osanna (ed.):
    "Proceedings of III. International Congress of Precision Machining - ICPM 2005";
    Abteilung für Austauschbau und Messtechnik, TU Wien, Wien, 2005, ISBN: 3-901-888-31-4; 372 pages.

  4. Authors: Thomas Bednar, E206 - 2; Fritz Bleicher, E311 - FET; Fabian Dür, E311 - FET; Katharina Eder, E206 - 2; Thomas Flatz, E311 - FET; Bernhard Heinzl, E183 - 1; Wolfgang Kastner, E183 - 1; Kristina Kiesel, E259 - 3; Iva Kovacic, E234 - 2; Ines Leobner, E302 - 1; Kristina Orehounig, E259 - 3; Karl Ponweiser, E302 - 1; Linus Waltenberger, E234 - 2; Dietmar Wiegand, E260 - E260-P; Stefan Emrich, E260 - E260-P

    T. Bednar, F. Bleicher, F. Dür, K. Eder, T. Flatz, B. Heinzl, W. Kastner, K. Kiesel, I. Kovacic, I. Leobner, K. Orehounig, K. Ponweiser, L. Waltenberger, D. Wiegand, S. Emrich:
    "Roadmap für Energieeffiziente Fertigungsbetriebe";
    Konsortium Projekt INFO, Wien, 2013, 66 pages.

    More information

  5. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Parallelkinematische Werkzeugmaschinen";
    Neuer wissenschaftlicher Verlag, Wien, 2003, ISBN: 3-7083-0118-8; 318 pages.

  6. Authors: Fritz Bleicher, E311 - FET; Janez Kopac; Lothar Meyer; Volker Stich

    F. Bleicher, J. Kopac, L.W. Meyer, V. Stich (ed.):
    "HPM - High Performance Manufacturing";
    accepted by Institut für Fertigungstechnik Wien, 2008, ISBN: 978-3-200-01355-1; 256 pages.

  7. Authors: Fritz Bleicher, E311 - FET; Martin Obermair, E311 - FET

    F. Bleicher, M. Obermair (ed.):
    "Die Zukunft der Fertigungstechnik - Tagungsband Wiener Produktionstechnik Kongress 2012";
    Neuer Wissenschaftlicher Verlag GmbH Nfg KG, Wien - Graz, 2012, ISBN: 978-3-7083-0872-2; 123 pages.

  8. Authors: Franz Brunner, E330 - 2(BT); Karl Wagner, E330 - 2(BT); Kurt Matyas, E330 - 2(BT); Peter Herbert Osanna, E311 - AuM

    F.J. Brunner, K. Wagner, K. Matyas, P.H. Osanna:
    "Taschenbuch Qualitätsmanagement";
    Carl Hanser Verlag, München, 1999, ISBN: 3-446-21118-7; 323 pages.

  9. Authors: Igor Budak; Janko Hodolic; Igor Besic; Dorde Vukelic; Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM

    I. Budak, J. Hodolic, I. Besic, D. Vukelic, P.H. Osanna, M.N. Durakbasa (ed.):
    "Coordinate Measuring Machines And Cad-Inspection - Koordinatne Merne Masine I Cad Inspekcia";
    Fakultet tehnickih nauka, Novi Sad, 2009, ISBN: 978-86-7892-195-7; 144 pages.

  10. Authors: Jan Duda; Ivan Kuric; Branko Katalinic, E311 - IMS

    J. Duda, I. Kuric, B. Katalinic (ed.):
    "Proceedings of the 5th DAAAM International Workshop "CA Systems and Technologies", ";
    DAAAM International Vienna, Vienna, 2000, ISBN: 3-901509-16-x.

  11. Author: Christoph Habersohn, E311 - FET

    Ch. Habersohn:
    "Einlegegerät für Drehmaschinen; Auslegung, Konstruktion und Berechnung";
    VDM Verlag, Deutschland, 2010, ISBN: 978-3-8364-5388-2; 96 pages.

  12. Author: Gerald Humenberger, E311 - LLU

    G. Humenberger:
    "Anwendung des Laserhobelns zur Gesenkreparatur von Druckgussformen";
    AV Akademikerverlag, Deutschland, 2013, ISBN: 978-3-639-48970-5; 114 pages.

    More information

  13. Author: Branko Katalinic, E311 - IMS

    B. Katalinic (ed.):
    "Annals of DAAAM for 2003 & Proceedings ";
    DAAAM International Vienna, Wien, 2003, ISBN: 3-901-509-34-8; 564 pages.

  14. Author: Branko Katalinic, E311 - IMS

    B. Katalinic (ed.):
    "Annals of DAAAM for 2004 & Proceedings of the 15th International Manufacturing & Automation: Globalisation- Technology - Men - Nature";
    DAAAM International Vienna, Wien, 2004, ISBN: 3-901509-42-9; 518 pages.

  15. Author: Branko Katalinic, E311 - IMS

    B. Katalinic (ed.):
    "Annals of DAAAM for 2005 & Proceedings";
    DAAAM International Vienna, Vienna, 2005, ISBN: 3-901509-46-1; 414 pages.

  16. Author: Branko Katalinic, E311 - IMS

    B. Katalinic (ed.):
    "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, practice and Education"";
    DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-70-4; 2060 pages.

  17. Author: Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions""";
    in series "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"", series editor: B. Katalinic; issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2010, ISBN: 978-3-901509-73-5, 1694 pages.

  18. Author: Branko Katalinic, E311 - IMS

    B. Katalinic (ed.):
    "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: Power of Knowledge and Creativity"";
    DAAAM International Vienna, Wien, 2011, ISBN: 978-3-901509-83-4; 1782 pages.

  19. Author: Branko Katalinic, E311 - IMS

    B. Katalinic (ed.):
    "Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium "Make Harmony between Technology and Nature, and Your Mind will Fly as a BIrd"";
    DAAAM International Vienna, Wien, 2012, ISBN: 978-3-901509-91-9; 1183 pages.

  20. Author: Branko Katalinic, E311 - IMS

    B. Katalinic (ed.):
    "Annals of DAAAM International for 1998 & Proceedings of the 9th International DAAAM Symposium, 22-24th October 1998, Cluj-Napoca, Romania";
    DAAAM International Vienna, Vienna, 1998, ISBN: 3-901509-08-9; 595 pages.

  21. Author: Branko Katalinic, E311 - IMS

    B. Katalinic (ed.):
    "Annals of DAAAM International for 1999 & Proceedings of the 10th International DAAAM Symposium, 21-23rd October 1999, Vienna, Austria";
    DAAAM International Vienna, Vienna, 1999, ISBN: 3-901509-10-0; 636 pages.

  22. Author: Branko Katalinic, E311 - IMS

    B. Katalinic (ed.):
    "Annals of DAAAM International for 2000 & Proceedings of the 11th International DAAAM Symposium, 19-21st October 2000, Opatija, Croatia";
    DAAAM International Vienna, Vienna, 2000, ISBN: 3-901509-13-5; 548 pages.

  23. Author: Branko Katalinic, E311 - IMS

    B. Katalinic (ed.):
    "Annals of DAAAM International for 2001 & Proceedings of the 12th International DAAAM Symposium, 24-27th October 2001, Jena, Germany";
    DAAAM International Vienna, Vienna, 2001, ISBN: 3-901509-19-4; 578 pages.

  24. Author: Branko Katalinic, E311 - IMS

    B. Katalinic (ed.):
    "Annals of DAAAM International for 2002 & Proceedings of the 13th International Symposium "Intelligent Manufacturing & Automation"";
    DAAAM International Vienna, Vienna, 2002, ISBN: 3-901509-29-1; 676 pages.

  25. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Covic D.: Invention of Team";
    DAAAM International Vienna & Universtiy of Mostar, Vienna - Mostar, 2003, 3-901-509-25-4; 240 pages.

  26. Author: Branko Katalinic, E311 - IMS

    B. Katalinic (ed.):
    "DAAAM International Scientific Book 2002";
    DAAAM International Vienna, Vienna, 2002, ISBN: 3-901509-30-5; 713 pages.

  27. Author: Branko Katalinic, E311 - IMS

    B. Katalinic (ed.):
    "DAAAM International Scientific Book 2003";
    DAAAM International Vienna, Wien, 2003, ISBN: 3-901-509-36-4; 646 pages.

  28. Author: Branko Katalinic, E311 - IMS

    B. Katalinic (ed.):
    "DAAAM International Scientific Book 2004";
    DAAAM International Vienna, Wien, 2004, ISBN: 3-901509-38-0; 722 pages.

  29. Author: Branko Katalinic, E311 - IMS

    B. Katalinic (ed.):
    "DAAAM International Scientific Book 2005";
    DAAAM International Vienna, Vienna, 2005, ISBN: 3-901509-43-7; 720 pages.

  30. Author: Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "DAAAM International Scientific Book 2009";
    in series "DAAAM Internations Scientific Book 2009", series editor: B. Katalinic; issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-69-8, 1004 pages.

  31. Author: Branko Katalinic, E311 - IMS

    B. Katalinic (ed.):
    "DAAAM International Scientific Book 2010";
    DAAAM International Vienna, Wien, 2010, ISBN: 978-3-901509-74-2; 808 pages.

  32. Author: Branko Katalinic, E311 - IMS

    B. Katalinic (ed.):
    "DAAAM International Scientific Book 2011";
    DAAAM International Vienna, Wien, 2011, ISBN: 978-3-901509-84-1; 642 pages.

  33. Author: Branko Katalinic, E311 - IMS

    B. Katalinic (ed.):
    "Decision Making under Risk";
    DAAAM International Vienna, Wien, 2004, ISBN: 3-901509-44-5; 86 pages.

  34. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Industrieroboter und flexible Fertigungssysteme für Drehteile";
    VDI Verlag GmbH, Düsseldorf, 1990, ISBN: 3-18-401027-9; 182 pages.

  35. Author: Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "International Journal of Advanced Robotic Systems Volume 1, Number 1";
    in series "International Journal of Advanced Robotic Systems", series editor: B. Katalinic; issued by: Wien; DAAAM International Vienna, Wien, 2004, (invited), 57 pages.

  36. Author: Branko Katalinic, E311 - IMS

    B. Katalinic (ed.):
    "Proceedings of 7th DAAAM International Symposium "Product & Manufacturing: Integration, Flexibility, Intelligence", 17-19th October 1996";
    DAAAM International Vienna, Vienna, 1996, ISBN: 3-901509-02-x; 526 pages.

  37. Author: Branko Katalinic, E311 - IMS

    B. Katalinic (ed.):
    "Proceedings of 8th DAAAM International Symposium "Intelligent Manufacturing & Automation, 23-25th October 1997, Dubrovnik, Croatia";
    DAAAM International Vienna, Vienna, 1997, ISBN: 3-901509-04-6; 412 pages.

  38. Author: Branko Katalinic, E311 - IMS

    B. Katalinic (ed.):
    "Proceedings of International Symposium "Automation and Metrology", 5th November 1990, Vienna, Austria";
    DAAAM International Vienna, Vienna, 1990, 159 pages.

  39. Author: Branko Katalinic, E311 - IMS

    B. Katalinic (ed.):
    "Proceedings of International Symposium "Flexible and Intelligent Automation", 4-6th November 1992, Budapest, Hungary";
    DAAAM International Vienna, Vienna, 1992, 211 pages.

  40. Authors: Branko Katalinic, E311 - IMS; Borut Buchmeister
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic, B. Buchmeister:
    "International Journal of Simulation Modelling Volume 4 Number 1";
    in series "International Journal of Simulation Modelling IJSIMM", series editor: B. Katalinic; issued by: Wien; DAAAM International Vienna, Wien, 2005, 47 pages.

  41. Authors: Branko Katalinic, E311 - IMS; Milan Kljajin

    B. Katalinic, M. Kljajin (ed.):
    "Proceedings of the 1st DAAAM International Conference: Advanced Technologies for the Developing Countries - ATDC-02";
    DAAAM International Vienna & Strossmayer University of Osijek - Faculty of Mechanical Engineering, Slavonski Brod, Vienna, 2002, ISBN: 3-901509-32-1; 548 pages.

  42. Authors: Branko Katalinic, E311 - IMS; Milan Kljajin; Ivan Budic

    B. Katalinic, M. Kljajin, I Budic (ed.):
    "Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries";
    DAAAM International Vienna, Slavonski Brod, 2005, ISBN: 953-6048-29-9; 701 pages.

  43. Authors: Branko Katalinic, E311 - IMS; Peter Herbert Osanna, E311 - AuM

    B. Katalinic, H. Osanna (ed.):
    "Proceedings of International Symposium "Man, Technique, Enviroment", 16-18th September 1993, Brno, Czech Republic";
    DAAAM International Vienna, Vienna, 1993, 408 pages.

  44. Authors: Branko Katalinic, E311 - IMS; Peter Herbert Osanna, E311 - AuM; Joze Balic; Franci Cus

    B. Katalinic, H. Osanna, J. Balic, F. Cus (ed.):
    "Proceedings of 5th DAAAM International Symposium "Automation und Metrology: Challange and Chance", 26-29th October 1994, Maribor, Slovenia";
    DAAAM International Vienna, Vienna, 1994, 535 pages.

  45. Authors: Branko Katalinic, E311 - IMS; Peter Herbert Osanna, E311 - AuM; Jozef Gawlik

    B. Katalinic, P.H. Osanna, J. Gawlik (ed.):
    "Proceedings of 6th DAAAM International Symposium "Intelligent Manufacturing Systems", Oktober 26-28, 1995, Krakow, Poland";
    DAAAM International Vienna, Vienna, 1995, ISBN: 3-901509-01-1; 404 pages.

  46. Authors: Branko Katalinic, E311 - IMS; Dzemo Tufekcic; Ramiz Selo

    B. Katalinic, D. Tufekcic, R. Selo (ed.):
    "Proceedings of the 2nd DAAAM Internationa Conference on Advanced Technologies for Developing Countries";
    DAAAM International Vienna & University of Tuzla, Vienna, 2003, ISBN: 3-901-509-35-6; 463 pages.

  47. Authors: Branko Katalinic, E311 - IMS; Iviza VEza; Bozenko Bilic

    B. Katalinic, I. VEza, B. Bilic (ed.):
    "Proceedings of the 3rd DAAAM International Conference on Advanced Technologies for Development Countries";
    DAAAM International Vienna & University of Split, Vienna-Split, 2004, ISBN: 953-6114-68-2; 442 pages.

  48. Authors: Branko Katalinic, E311 - IMS; Emil Wessely

    B. Katalinic, E. Wessely (ed.):
    "Proceedings of the 4th Workshop "Human Factor and Environmentalist", 5th December 2002, Kosice, Slovakia";
    DAAAM International Vienna, Vienna, 2002, ISBN: 3-901509-37-2; 122 pages.

  49. Authors: Alexander Kratky, E311 - LLU; Dieter Schuöcker, E311 - LLU; Alexander Kaplan

    A. Kratky, D. Schuöcker, A. Kaplan (ed.):
    "PROCEEDINGS OF THE 16th MEETING ON MODELLING - SIMULATION - VIRTUALITY IN HIGH POWER LASER TECHNOLOGY";
    Proceedings M4PL16, 2003.

  50. Authors: Ivan Kuric; Branko Katalinic, E311 - IMS

    I. Kuric, B. Katalinic (ed.):
    "Proceedings of the 4th DAAAM International Workshop "CA Systems and Technologies: Advanced Methodology of Process Planning"", 12-13th October 1999, Zilina, Slovak Republic";
    DAAAM International Vienna, Vienna, 1999, ISBN: 3-901509-12-7.

  51. Authors: Ivan Kuric; Branko Katalinic, E311 - IMS

    I. Kuric, B. Katalinic (ed.):
    "Proceedings of the 6th DAAAM International Workshop "CA Systems and Technologies", 25-26th September 2001, Sulov, Slovak Republic";
    DAAAM International Vienna, Vienna, 2001, ISBN: 3-901509-27-5.

  52. Authors: Vlado Majstorovic; Branko Katalinic, E311 - IMS; Dragan Covic; Vojo Visekruna

    V. Majstorovic, B. Katalinic, D. Covic, V. Visekruna (ed.):
    "Proceedings of the 2nd International Conference Business Systems Management - UPS 2001, University of Mostar, Mostar, 2002-05-31 2002-06-02";
    DAAAM International Vienna & Universtiy of Mostar, Vienna, 2001, ISBN: 3-901509-26-7; 333 pages.

  53. Authors: Vlado Majstorovic; Branko Katalinic, E311 - IMS; Dragan Covic; Vojo Visekruna

    V. Majstorovic, B. Katalinic, D. Covic, V. Visekruna (ed.):
    "Proceedings of the 3rd International Conference UPS 2004 Business Systems Management";
    DAAAM International Vienna & Universtiy of Mostar, Vienna - Mostar, 2004, ISBN: 3-901509-24-0; 303 pages.

  54. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat (ed.):
    "Quality in Industry";
    Abteilung für Austauschbau und Messtechnik, TU Wien, Wien, 2004, ISBN: 3-901888-23-3; 147 pages.

  55. Authors: Jyri Papstel; Branko Katalinic, E311 - IMS

    J. Papstel, B. Katalinic (ed.):
    "Proceedings of the 1st International Conference of DAAAM National Estonia, 25 - 27th September 1997, Tallinn Technical University, Estonia";
    DAAAM International Vienna, Vienna, 1997, ISBN: 3-901509-07-0.

  56. Authors: Jyri Papstel; Branko Katalinic, E311 - IMS

    J. Papstel, B. Katalinic (ed.):
    "Proceedings of the 2nd International Conference of DAAAM National Estonia " Industrial Engineering - Activities Targeted to SME";
    Tallinn Technical University, Tallinn, 2000, ISBN: 9985-894-21-9.

  57. Authors: Jyri Papstel; Branko Katalinic, E311 - IMS

    J. Papstel, B. Katalinic (ed.):
    "Proceedings of the 3rd International Conference of DAAAM National Estonia "Industrial Engineering - New Challenges to SME";
    DAAAM National Estonia & Tallinn Technical University, Tallinn, 2002, ISBN: 9985-59-272-7; 267 pages.

  58. Authors: Jyri Papstel; Branko Katalinic, E311 - IMS

    J. Papstel, B. Katalinic (ed.):
    "Proceedings of the 4th International Conference Industrial Engineering - New Challenges to SME";
    DAAAM International Vienna & DAAAM National Estonia, Tallinn, 2004, ISBN: 9985-894-59-6; 301 pages.

  59. Author: Falko Puschitz, E311 - FET

    F. Puschitz:
    "Kalibrieren von Werkzeugmaschinen mit Parallelkinematik";
    SVH - Südwestdeutscher Verlag für Hochschulschriften, Saarbrücken, 2011, ISBN: 978-3-8381-2354-7; 207 pages.

    More information

  60. Author: Dieter Schuöcker, E311 - LLU

    D. Schuöcker (ed.):
    "Handbook of the Eurolaser Academy Vol. 1";
    Kluwer Academic Publishers, 1998.

  61. Author: Dieter Schuöcker, E311 - LLU

    D. Schuöcker (ed.):
    "Handbook of the Eurolaser Academy Vol. 2";
    Kluwer Academic Publishers, 1998, ISBN: 0-412-82590-2.

  62. Author: Dieter Schuöcker, E311 - LLU

    D. Schuöcker:
    "HIGH POWER LASERS IN PRODUCTION ENGINEERING";
    World Scientific Pub Co Inc, 1999, ISBN: 981-02-3039-7; 464 pages.

    More information

  63. Author: Dieter Schuöcker, E311 - LLU

    D. Schuöcker:
    "Spanlose Fertigung";
    Oldenbourg, 2006, ISBN: 3-486-58022-1; 166 pages.

  64. Authors: K Velisek; Branko Katalinic, E311 - IMS

    K. Velisek, B. Katalinic (ed.):
    "VÝROBNÉ SYSTÉMY I.";
    Slovenská Technická Univerzita v Bratislave, Bratislava, 2004, ISBN: 80-227-2009-7; 209 pages.

  65. Authors: Emil Wessely; Branko Katalinic, E311 - IMS

    E. Wessely, B. Katalinic (ed.):
    "Proceedings of the 2nd Workshop "Intelligent Manufacturing Systems", Technical University of Kosice, Slovakia, 2001-11-29";
    DAAAM International Vienna, Vienna, 2001, ISBN: 3-901509-18-6; 93 pages.


Publications in Scientific Journals


  1. Authors: Ali Afjehi-Sadat, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Dayananda Samarawickrama; Ken J. Stout

    A. Afjehi-Sadat, M.N. Durakbasa, P.H. Osanna, Y. D. Samarawickrama, K.J. Stout:
    "Quality Control in bio-medicine and bio-engineering through application of sophisticated production metrology";
    Elektronika, I (2005), 10; 46 - 50.

  2. Authors: Vid Agrez; Ferdinand Bammer, E311 - LLU; Bostjan Podobnik, LPKF Laser; Rok Petkovsek, University Ljubljana

    V. Agrez, F. Bammer, B. Podobnik, R. Petkovsek:
    "Influence of the retardation of the multiplexing element in a dual channel Q-switched laser";
    Applied Physics B, 112 (2013), 1; 73 - 81.

    More information

  3. Authors: Seyithan Ates; M. Numan Durakbasa, E311 - AuM

    S. Ates, M.N. Durakbasa:
    "Advanced Quality Approach For Energy Management";
    Research Journal of Economics, Business and ICT, Research Journal of Economics, Business and ICT (2011), Volume 4.

  4. Authors: Seyithan Ates; M. Numan Durakbasa, E311 - AuM

    S. Ates, M.N. Durakbasa:
    "Evaluation of corporate energy management practices of energy intensive industries in Turkey";
    Energy, 1 (2012), ##.

  5. Authors: Farsad Badjgholi, E311 - RIF; Burkhard Kittl, E311 - RIF

    F. Badjgholi, B. Kittl:
    "Prototyp zur Selektion der optimalen Werkzeuge bei spanabhebender Bearbeitung prismatischer Teile";
    ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 4 (2002), 167 - 172.

    More information

  6. Authors: Ferdinand Bammer, E311 - LLU; Bernhard Holzinger, E311 - LLU

    F. Bammer, B. Holzinger:
    "Time-multiplexing generates a diode laser beam with high beam quality";
    Optics and Laser Technology, 39 (2007), 39; 1002 - 1007.

    More information

  7. Authors: Ferdinand Bammer, E311 - LLU; Bernhard Holzinger, E311 - LLU; Thomas Schumi, E311 - LLU

    F. Bammer, B. Holzinger, T. Schumi:
    "Time multiplexing of high power laser diodes with single crystal photo-elastic modulators";
    Optics Express, 14 (2006), 8; 9 pages.

    More information

  8. Authors: Ferdinand Bammer, E311 - LLU; Rok Petkovsek, University Ljubljana

    F. Bammer, R. Petkovsek:
    "Q-switching of a fiber laser with a single crystal photoelastic modulator";
    Optics Express, 15 (2007), 10; 6 pages.

    More information

  9. Authors: Ferdinand Bammer, E311 - LLU; Rok Petkovsek, University Ljubljana; Jaka Petelin, Univ. Ljubljana; Janez Mozina, Univ. Ljubjana

    F. Bammer, R. Petkovsek, J. Petelin, J. Mozina:
    "Fast ellipsometric measurements based on a single crystal photo-elastic modulator";
    Optics Express, 18 (2010), 20; 21410 - 21418.

    More information

  10. Authors: Ferdinand Bammer, E311 - LLU; Rok Petkovsek, University Ljubljana; Dieter Schuöcker, E311 - LLU; Janez Mozina, Univ. Ljubjana

    F. Bammer, R. Petkovsek, D. Schuöcker, J. Mozina:
    "Dual-mode single-crystal photoelastic modulator and possible applications";
    Applied Optics, 48 (2008), 7; 86 - 91.

    More information

  11. Authors: Ferdinand Bammer, E311 - LLU; Thomas Schumi, E311 - LLU; Andreas Otto, E311 - LLU; Dieter Schuöcker, E311 - LLU

    F. Bammer, T. Schumi, A. Otto, D. Schuöcker:
    "Laser Assisted Bedning for Efficient Light-Weight-Production";
    Tehnicki Vjesnik-Technical Gazette, 18 (2011), ISSN: 1330-3651; 571 - 576.

    More information

  12. Authors: Ferdinand Bammer, E311 - LLU; Dieter Schuöcker, E311 - LLU; Thomas Schumi, E311 - LLU; Bernhard Holzinger, E311 - LLU; Gerald Humenberger, E311 - LLU

    F. Bammer, D. Schuöcker, T. Schumi, B. Holzinger, G. Humenberger:
    "A Diode-Laser-System for Laser-Assisted Bending of Brittle";
    Advances in Optical Technologies, 2011 (2011), 4 pages.

    More information

  13. Authors: Carla Barbatti, MPI; José Garcia, MPI; Gerhard Liedl, E311 - LLU; Anke Rita Pyzalla, MPI Eisenforschung

    C. F. Barbatti, J. Garcia, G. Liedl, A. Pyzalla:
    "Joining of cemented carbides to steel by laser beam welding";
    Materialwissenschaft und Werkstofftechnik, 38 (2007), 11; 908 - 914.

    More information

  14. Authors: Jorge Martin Bauer, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Gökcen Bas, E311 - AuM

    J.M. Bauer, M.N. Durakbasa, G. Bas:
    "Multi Functional Intelligent Measurement Robot, As a Part of a Global Quality Management System for Collaboration Between Small, Medium and Large Scale Enterprises";
    Quality-Access to Success, Vol.13, S5, November 2012 (2012), ISSN: 1582-2559; 67 - 72.

    More information

  15. Authors: Johannes Bernreiter, E311 - FET; Christoph Einspieler, E311 - FET; Dietmar Steindl; Christian Buchner

    J. Bernreiter, C. Einspieler, D. Steindl, C. Buchner:
    "Volumenbestimmung von E1-Gewichtsstücken; Automatische Prüfanlage zur Bestimmung des Volumens von Festkörpern";
    WägeRaum (invited), 4 (2006), 19; 8 - 10.

    More information

  16. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Wissen schaft!";
    MegaTech Das Österreichische Technikmagazin (invited), 7 (2006), 46.

    More information

  17. Authors: Fritz Bleicher, E311 - FET; Johannes Bernreiter, E311 - FET

    F. Bleicher, J. Bernreiter:
    "Hybridbearbeitung von keramischen Werkstoffen";
    MC-report (invited), 2/2010 (2010), 2; 9.

  18. Authors: Fritz Bleicher, E311 - FET; Johannes Bernreiter, E311 - FET; Christoph Einspieler, E311 - FET

    F. Bleicher, J. Bernreiter, C. Einspieler:
    "Gesteuertes Einlippen-Tieflochbohren";
    MegaTech Das Österreichische Technikmagazin (invited), 6 (2006), 64 - 65.

    More information

  19. Authors: Fritz Bleicher, E311 - FET; Fabian Dür, E311 - FET; Ines Leobner, E302 - 1; Iva Kovacic, E234 - 2; Bernhard Heinzl, E183 - 1; Wolfgang Kastner, E183 - 1

    F. Bleicher, F. Dür, I. Leobner, I. Kovacic, B. Heinzl, W. Kastner:
    "Co-simulation environment for optimizing energy efficiency in production systems";
    CIRP Annals-Manufacturing Technology, 63 (2014), 1; 441 - 444.

    More information

  20. Authors: Fritz Bleicher, E311 - FET; Falko Puschitz, E311 - FET; Christoph Dorn, E311 - FET

    F. Bleicher, F. Puschitz, C. Dorn:
    "Wer kann, der CAM!";
    MegaTech Das Österreichische Technikmagazin, 12 (2006), 30 - 37.

    More information

  21. Authors: Fritz Bleicher, E311 - FET; Falko Puschitz, E311 - FET; Christoph Dorn, E311 - FET; Helmut Caudr, E311 - FET

    F. Bleicher, F. Puschitz, C. Dorn, H. Caudr:
    "Kleben für Fortgeschrittene";
    MegaTech Das Österreichische Technikmagazin, 12 (2006), 12; 20 - 21.

    More information

  22. Authors: Fritz Bleicher, E311 - FET; Ulrich Renger, E311 - FET; Horst Lang

    F. Bleicher, U. Renger, H. Lang:
    "Lastkollektiverfassung als Voraussetzung für TCO-Modelle";
    ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb (invited), 105 (2010), 277 - 281.

  23. Authors: Ismail Bogrekci; M. Numan Durakbasa, E311 - AuM; Pinar Demircioglu

    I. Bogrekci, M.N. Durakbasa, P. Demircioglu:
    "Comparison between 3D Digital and Optical Microscopes for the Surface Measurement by Computer Vision.";
    at - Automatisierungstechnik, 61 (2013), Heft 3; 195 - 202.

  24. Authors: Mehmet Cakmakci; Neslihan Ortabas-Demirel; M. Numan Durakbasa, E311 - AuM; Gökcen Bas, E311 - AuM; Adriana Hornikova, E311 - AuM

    M. Cakmakci, N. Ortabas-Demirel, M.N. Durakbasa, G. Bas, A. Hornikova:
    "Interaction Between Capability Indices and Skewness of Non-Normal Processes Using Quantile Based Estimation and Johnson Transformation";
    Quality-Access to Success, Vol. 13, S5, November 2012 (2012), 79 - 86.

    More information

  25. Authors: Deniz Coskun; Pinar Demircioglu; Ismail Bogrekci; M. Numan Durakbasa, E311 - AuM

    D. Coskun, P. Demircioglu, I. Bogrekci, M.N. Durakbasa:
    "Electrodynamical considerations in r-t measurements of high Tc bulk superconductivity: an inexpensive set up design";
    Quality-Access to Success, Vol.13, S5, November 2012 (2012), 325 - 332.

    More information

  26. Authors: Can Davutoglu; M. Numan Durakbasa, E311 - AuM; Gökcen Bas, E311 - AuM; Erol Güclü, E311 - AuM

    C. Davutoglu, M.N. Durakbasa, G. Bas, E. Güclü:
    "Improved Quality and Reliability in Telecommunication Network Testing by means of a Remote Online Test System";
    International Journal of Online Engineering (iJOE), Vol.10, No.4 (2014), ISSN: 1868-1646; 66 - 69.

    More information

  27. Authors: Pinar Demircioglu; Ismail Bogrekci; M. Numan Durakbasa, E311 - AuM

    P. Demircioglu, I. Bogrekci, M.N. Durakbasa:
    "Micro scale surface texture characterization of technical structures by computer vision";
    Measurement, Volume 46 (2013), Issue 6; 2022 - 2028.

  28. Authors: Pinar Demircioglu; M. Numan Durakbasa, E311 - AuM

    P. Demircioglu, M.N. Durakbasa:
    "Investigations on machined metal surfaces through the stylus type and optical 3D instruments and their mathematical modeling with the help of statistical techniques";
    Measurement, 44 (2011), 611 - 619.

  29. Authors: Pinar Demircioglu; M. Numan Durakbasa, E311 - AuM; Ozgur Tan

    P. Demircioglu, M.N. Durakbasa, O. Tan:
    "A Comparison Between Contact Type Profilometer and Different D Optical Techniques: A Case Study in Characterization of Machined Surface Structures";
    Quality-Access to Success, Vol.13, S5, November 2012 (2012), 117 - 122.

    More information

  30. Author: Christoph Dorn, E311 - FET

    C. Dorn:
    "Ein Planet - zwei Welten";
    Industriemagazin, 11/09 (2009), 11/09; 94.

  31. Authors: Christoph Dorn, E311 - FET; Norman Herzig, TU Chemnitz; Jörg Trebels, RWTH AAchen

    C. Dorn, N. Herzig, J. Trebels:
    "Dem internationalen Wettbewerb durch neue Produktionsstrategien begegnen";
    UdZ - FIR-Zeitschrift für Betriebsorganisation und Unternehmensentwicklung, 2 (2008), 2; 15 - 17.

  32. Authors: Christoph Dorn, E311 - FET; Iva Kovacic, E234 - 2; Fritz Bleicher, E311 - FET; Christoph Achammer, E234 - 2; Markus Honsig

    C. Dorn, I. Kovacic, F. Bleicher, C. Achammer, M. Honsig:
    "Energie sparen im großen Stil";
    Hi!Tech, 3/2010 (2010).

  33. Author: Fabian Dür, E311 - FET

    F. Dür:
    "Clusterland Award 2013 Preisträger";
    Online - ecoplus.at, 19,12,13 (2013), 1 pages.

  34. Authors: Fabian Dür, E311 - FET; Thomas Flatz, E311 - FET

    F. Dür, T. Flatz:
    ""eco2production" erhält Clusterland Award 2013";
    TU Bulletin, 20.06.13 (2013), 2 pages.

  35. Authors: Fabian Dür, E311 - FET; Thomas Flatz, E311 - FET; Benjamin Losert

    F. Dür, T. Flatz, B. Losert:
    "EU Projekt "eco2-cut" geht in die nächste Runde";
    MC-report, 2 (2012), 14.

  36. Author: M. Numan Durakbasa, E311 - AuM

    M.N. Durakbasa:
    "Dynamification of testing intervals for measuring instrument confirmation";
    e&i, 1 (1999), 116; 270 - 274.

  37. Author: M. Numan Durakbasa, E311 - AuM

    M.N. Durakbasa:
    "Koordinatenmesstechnik für biomedizinische Anwendungen";
    e&i, 117 (2000), 4; 269 - 272.

  38. Author: M. Numan Durakbasa, E311 - AuM

    M.N. Durakbasa:
    "Produktdatenaustausch mit Koordinatenmeßgeräten in der intelligenten Fertigungsumgebung";
    e&i, 1 (1997), 114 Nr.4; 200 - 203.

  39. Authors: M. Numan Durakbasa, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM; Anil Nomak Akdogan

    M.N. Durakbasa, A. Afjehi-Sadat, N. Nomak Akdogan:
    "Dimensional And Geometrical Measurements And Interpretation Of Measuring Results On The Basis Of The Skin-Model";
    Measurement Science Review, 1 (2001), 1; 89 - 92.

  40. Authors: M. Numan Durakbasa, E311 - AuM; Gökcen Bas, E311 - AuM; Jorge Martin Bauer, E311 - AuM; G. Poszvek

    M.N. Durakbasa, G. Bas, J.M. Bauer, G. Poszvek:
    "Intelligent Design and Advanced Metrology as Strategic Approaches to Efficiency and Quality Improvement in Smart Manufacturing";
    International Journal of Advanced Quality, Vol.41 (2013), 1; 17 - 22.

    More information

  41. Authors: M. Numan Durakbasa, E311 - AuM; Gökcen Bas, E311 - AuM; Jorge Martin Bauer, E311 - AuM; G. Poszvek

    M.N. Durakbasa, G. Bas, J.M. Bauer, G. Poszvek:
    "Trends In Precision Manufacturing Based On Intelligent Design And Advanced Metrology";
    Key Engineering Materials, Trans Tech Publications, Switzerland (2014), Vol.581; 417 - 422.

    More information

  42. Authors: M. Numan Durakbasa, E311 - AuM; Gökcen Bas, E311 - AuM; Zehra Özkan

    M.N. Durakbasa, G. Bas, Z. Özkan:
    "A New Strategy for Energy - A Proposal of an Energy Management Implementation Model for Productivity Enhancement within the Integrated Management Systems";
    Journal of the Institute of Management Services, 1 (2011), Volume 55 Number 2; 28 - 30.

  43. Authors: M. Numan Durakbasa, E311 - AuM; Gökcen Bas, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Jorge Martin Bauer, E311 - AuM

    M.N. Durakbasa, G. Bas, P.H. Osanna, J.M. Bauer:
    "Sustainable Management Systems of Quality, Energy and Environment in Industry / Sisteme durabile de management al calitãtii, energiei si mediului în industrie";
    Quality - access to success, Anul 12 (2011), 4; 21 - 25.

  44. Authors: M. Numan Durakbasa, E311 - AuM; Jorge Martin Bauer, E311 - AuM; Gökcen Bas, E311 - AuM; David Riepl, E311 - AuM

    M.N. Durakbasa, J.M. Bauer, G. Bas, D. Riepl:
    "Telepresence and Teleoperation in Work Concept of Multifunctional Intelligent Factories: Experience of Telepresence in the Micro and Nano Metrology Laboratory AuM-TU-Wien";
    Quality-Access to Success, Vol.13, S5, November 2012 (2012), 131 - 136.

    More information

  45. Authors: M. Numan Durakbasa, E311 - AuM; Jorge Martin Bauer, E311 - AuM; Claudio Verrastro; David Riepl, E311 - AuM; Eugenio Ferradas

    M.N. Durakbasa, J.M. Bauer, C. Verrastro, D. Riepl, E. Ferradas:
    "Robot Autónomo Especial MFI-MR, en el Marco de Sistemas Globales de Gestión de la Calidad y Entornos de de Colaboración entre Pequeñas y Medianas Empresas";
    Anales de la JII 2011 8š Jornada de Informática Industrial, 1 (2011), 159 - 173.

  46. Authors: M. Numan Durakbasa, E311 - AuM; Ismail Bogrekci; Pinar Demircioglu; Gökcen Bas, E311 - AuM; Asli Günay

    M.N. Durakbasa, I. Bogrekci, P. Demircioglu, G. Bas, A. Günay:
    "Surface characterization by accurate measurement and image processing systems on machined surfaces of precision cutting tools";
    JAMRIS - Journal of Automation, Mobile Robotics & Intelligent Systems, Volume 6 (2012), 03; 51 - 56.

  47. Authors: M. Numan Durakbasa, E311 - AuM; Pinar Demircioglu; Ismail Bogrekci; Gökcen Bas, E311 - AuM; Asli Gunay

    M.N. Durakbasa, P. Demircioglu, I. Bogrekci, G. Bas, A. Gunay:
    "Assessment of machining with uncoated and coated end mills and determining surface topography using 2D fast Fourier transform";
    International Journal of Nanomanufacturing, Vol.8 (2012), 5/6; 493 - 507.

    More information

  48. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM

    M.N. Durakbasa, P.H. Osanna:
    "Intelligent Design and Metrology for Higher Quality, Accuracy and Improving Production Efficiency";
    Acta Mechanica Slovaca, Volume 15 (2011), 1/2011; 6 - 10.

  49. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM

    M.N. Durakbasa, P.H. Osanna:
    "Intelligent Tolerancing And Advanced Metrology To Support Total Quality Management And Modern Industrial Fabrication";
    International Journal "Total Quality Management & Excellence", 1, Vol.39 (2011), UDK 658.5; 27 - 31.

  50. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM

    M.N. Durakbasa, P.H. Osanna:
    "Micro and Nano Metrology to Support Developmentsin Technology, Sustainability and Biomedicine.";
    Academic Journal of Manufacturing Engineering, 1 (2003), 2; 6 - 12.

  51. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM

    M.N. Durakbasa, P.H. Osanna:
    "Utilization of Co-ordinate Measurement Technique in Biomedicine to Evaluate the Shape of Non-Technical Structures";
    Measurement, 33 (2003), N.2; 157 - 161.

  52. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM

    M.N. Durakbasa, P.H. Osanna, A. Afjehi-Sadat:
    "A general approach to workpiece characterization in the frame of GPS (Geometrical Product Specification and Verification";
    International Journal of Machine Tools & Manufacture, 41 (2001), 2147 - 2151.

    More information

  53. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Gökcen Bas, E311 - AuM

    M.N. Durakbasa, P.H. Osanna, G. Bas:
    "Advanced Management Systems for Quality, Energy and Environment for Efficiency Enhancement of Modern Manufacturing Industries";
    International Journal Advanced Quality, Vol.40/2/Belgrade (2012), UDC 658.5; 11 - 19.

  54. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Gökcen Bas, E311 - AuM

    M.N. Durakbasa, P.H. Osanna, G. Bas:
    "Intelligent Design and Advanced Metrology to Support and Improve Integrated Management Systems for Quality, Environment and Energy in Production Engineering";
    Quality-Access to Success, Vol.13, S5, November 2012 (2012), 17 - 22.

    More information

  55. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Gökcen Bas, E311 - AuM; Pinar Demircioglu; Mehmet Cakmakci; Adriana Hornikova, E311 - AuM

    M.N. Durakbasa, P.H. Osanna, G. Bas, P. Demircioglu, M. Cakmakci, A. Hornikova:
    "Novel Developments in Dimensional Nanometrology in the Context of Geometrical Product Specifications and Verification (GPS)";
    JAMRIS - Journal of Automation, Mobile Robotics & Intelligent Systems, Volume 6 (2012), 02; 22 - 25.

  56. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Jorge Martin Bauer, E311 - AuM; Gökcen Bas, E311 - AuM

    M.N. Durakbasa, P.H. Osanna, J.M. Bauer, G. Bas:
    "Innovation In Production Metrology For Precision Engineering And To Support Sustainability And Improvement Of Process And Product Quality In Modern Manufacturing Industry";
    MSD Journal, Volume 4 (2012), 1; 5 - 11.

  57. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Mehmet Cakmakci; Rudolf Oberländer; Gerhard Waczek

    M.N. Durakbasa, P.H. Osanna, M. Cakmakci, R. Oberländer, G. Waczek:
    "Flexible Messzelle";
    e&i, I (1991), 6; 257 - 261.

  58. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Liviu Crisan; Lukas Kräuter

    M.N. Durakbasa, P.H. Osanna, L. Crisan, L. Kräuter:
    "The Analytic Description and Design of Workpiece Geometry for Mechanical Engineering";
    Journal for Technology of Plasticity, Volume 33 (2008), UDK 621.7; 13 - 21.

  59. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Pinar Demircioglu

    M.N. Durakbasa, P.H. Osanna, P. Demircioglu:
    "The Factors Affecting Surface Roughness Measurements of the Machined Flat and Spherical Surface Structures - The Geometry and the Precision of the Surface";
    Measurement, Volume 44 (2011), Issue 10; 1986 - 1999.

  60. Authors: M. Numan Durakbasa, E311 - AuM; Ken J. Stout; Peter Herbert Osanna, E311 - AuM; Mehmet Emin Yurci

    M.N. Durakbasa, K.J. Stout, P.H. Osanna, M.E. Yurci:
    "Function Dependent Quality Assurance in Modern Production Engineering";
    Manufactoring Engineering, VI (2007), 4; 88 - 90.

  61. Authors: M. Numan Durakbasa, E311 - AuM; Mehmet Emin Yurci; Anil Akdogan; S. Burak Yildirim

    M.N. Durakbasa, M.E. Yurci, A. Akdogan, S.B. Yildirim:
    "Surface Roughness Measurement Uncertainties Both in Tactile and Optical Instruments";
    Quality-Access to Success, Vol.13, S5, November 2012 (2012), 137 - 140.

    More information

  62. Authors: Christoph Einspieler, E311 - FET; Johannes Bernreiter, E311 - FET; Christian Buchner; Dietmar Steindl

    C. Einspieler, J. Bernreiter, C. Buchner, D. Steindl:
    "Entwicklung eines Handlingsystems für Gewichte von 1 mg bis 10 g zur Bestückung hochpräziser Waagen";
    WDM - wägen dosieren mischen, 5 (2007), 16 - 19.

  63. Authors: Christoph Einspieler, E311 - FET; Johannes Bernreiter, E311 - FET; Christian Buchner; Dietmar Steindl

    C. Einspieler, J. Bernreiter, C. Buchner, D. Steindl:
    "Realisierung eines vollautomatischen Masselabors durch drei "Wägeroboter"";
    WDM - wägen dosieren mischen, 6 (2007), 18 - 23.

  64. Authors: Christoph Einspieler, E311 - FET; Johannes Bernreiter, E311 - FET; Dietmar Steindl; Christian Buchner

    C. Einspieler, J. Bernreiter, D. Steindl, C. Buchner:
    "Entwicklung und Fertigung eines Robotersystems für Gewichte von 1 mg bis 10 g";
    WägeRaum, 1 (2007), 20; 16 - 19.

    More information

  65. Authors: Christoph Einspieler, E311 - FET; Christian Buchner

    C. Einspieler, C. Buchner:
    "Volumenbestimmung von E1-Gewichtsstücken";
    BTE Informationen zum Eichwesen (invited), 2 (2006), 17 - 18.

    More information

  66. Authors: Christoph Einspieler, E311 - FET; Christian Buchner; Dietmar Steindl

    C. Einspieler, C. Buchner, D. Steindl:
    "Entwicklung und Fertigung einer Prüfanlage zur Dichtebestimmung";
    WägeRaum (invited), 1 (2006), 16; 23 - 26.

    More information

  67. Authors: Thomas Flatz, E311 - FET; Fabian Dür, E311 - FET; Benjamin Losert

    T. Flatz, F. Dür, B. Losert:
    "Erfolgreiches EU-Projekt - eco2cut Industrie spart Energie und Ressourcen";
    Factory, 10 (2012).

  68. Authors: Bernhard Geringer, E315; Dominikus Klawatsch, E315; Josef Graf, E315; Hans-Peter Lenz, E315; Gerhard Liedl, E311 - LLU; Dieter Schuöcker, E311 - LLU; Walter F. Piock; Markus Jetzinger, E315; Paul Kapus

    B. Geringer, D. Klawatsch, J. Graf, H.-P. Lenz, G. Liedl, D. Schuöcker, W.F. Piock, M. Jetzinger, P. Kapus:
    "Laserzündung - Ein neuer Weg für den Ottomotor";
    Motortechnische Zeitschrift (MTZ) (invited), 65 Jahrgang (2004), 3; 214 - 219.

    More information

  69. Authors: Aytac Gören; M. Numan Durakbasa, E311 - AuM; Hakan Göcerler

    A. Gören, M.N. Durakbasa, H. Göcerler:
    "Verification of Product and Production Precision Using Surface Roughness and Coordinate Measuring Machines";
    Endüstri ve Otomasyon - Industry and Automation, I (2007), 126; 24 - 29.

  70. Authors: Asli Günay; M. Numan Durakbasa, E311 - AuM; Bülent A. Katipoglu

    A. Günay, M.N. Durakbasa, A. B. Katipoglu:
    "Evaluation of Modifications of Implant Surfaces Created by Means of Sandblasting and Acid Etching Techniques Applied on the Pure Titanium Implants G4 (Grade 4) Used in the Dental Implantology With the Consideration of the Manufacturing Stages (DENTAL İMPLANTOLOJİDE KULLANILAN G4 SAF TİTANYUM İMPLANTLARIN KUMLAMA VE ASİTLEME TEKNİKLERİYLE OLUŞTURULAN YÜZEY MODİFİKASYONLARININ İMALAT AŞAMALARINI ELE ALARAK DEĞERLENDİRİLMESİ)";
    Mühendis ve Makina, 54 (2013), 641; 36 - 43.

    More information

  71. Authors: Johannes Gumpinger, E206; Sonja Felber, E206 - 1; Gerhard Liedl, E311 - LLU

    J. Gumpinger, S. Felber, G. Liedl:
    "Mechanisch-technologische Eigenschaften der Titanlegierung Ti-6Al-4V hergestellt mit Selective Laser Melting (SLM)";
    Schweiss-&Prüftechnik, 11/12 (2013), 184 - 190.

    More information

  72. Authors: Asli Gunay; Sinan Fank; T. Gulmez; M. Numan Durakbasa, E311 - AuM

    A. Gunay, S. Fank, T. Gulmez, M.N. Durakbasa:
    "Calculation of measurement uncertainty for plastic (ABS) material in flexural testing";
    International Journal of Metrology and Quality Engineering, 1 (2013), Volume 4, Issue 01; 29 - 33.

  73. Authors: Asli Gunay; Binnur Sagbas; M. Numan Durakbasa, E311 - AuM

    A. Gunay, B. Sagbas, M.N. Durakbasa:
    "Importance of Measurement Parameters for the Dental Implant Surface Characterization";
    Acta Physica Polonica A, 1, Volume 125 (2014), 2; 484 - 487.

  74. Authors: Karl Hammerl; Fritz Bleicher, E311 - FET

    K. Hammerl, F. Bleicher:
    "DNC in verteilten Fertigungsleitsystemen";
    Maschinenmarkt, 46/2001 (2001), 38 - 42.

  75. Authors: Adriana Hornikova, E311 - AuM; M. Numan Durakbasa, E311 - AuM

    A. Hornikova, M.N. Durakbasa:
    "Industrial Engineering and Technology Development Supported by Statistical Methods";
    Economics and Informatics, 1 (2013), XI; 32 - 46.

    More information

  76. Authors: Yu Hui; Sonja Felber, E206 - 1; Fritz Bleicher, E311 - FET

    Y. Hui, S. Felber, F. Bleicher:
    "Chipping mechanism and material removal rate of diamond and core drilling";
    Diamond & Abrasives Engineering, 4 (2013), 1 - 6.

  77. Authors: Christian Janner; Fritz Bleicher, E311 - FET

    C. Janner, F. Bleicher:
    "Sicherheitsaspekte beim Einsatz von Teleservices in Automatisierungsanlagen";
    MegaTech Das Österreichische Technikmagazin, 5/01 (2001).

  78. Authors: Alexander Kaplan; Gerhard Liedl, E311 - LLU

    A. Kaplan, G. Liedl et al.:
    "Laser dispersing of TiC-Powder into Al-Substrates";
    Lasers in Engineering, 7 (1998), 3-4; 165 - 178.

  79. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Bionic Assembly Systems: Selforganizing Complex Flexible Assembly System";
    Acta Mechanica Slovaca, Vol. 6 (2002), No. 2/2002; 15 - 20.

  80. Authors: Branko Katalinic, E311 - IMS; Valentin Pryanichnikov; Kanji Ueda, E311-IMS; Paulina Cesarec, E311 - IMS; Ilya Konstantinovich Kukushkin; Roman Kettler, E311 - IMS

    B. Katalinic, V. Pryanichnikov, K. Ueda, P. Cesarec, I. Kukushkin, R. Kettler:
    "Bionic Assembly System: working modes, control and scheduling";
    International Journal of Industrial Engineering and Management, Vol 3 (2012), 3; 121 - 131.

  81. Authors: R. Kienberger; Eleftherios Goulielmakis, E387; Matthias Uiberacker; Andrius Baltuska, E387; Vladislav Yakovlev; Ferdinand Bammer, E311 - LLU; Armin Scrinzi, E387; Th. Westerwalbesloh; U. Kleineberg; U. Heinzmann; M. Drescher; Ferenc Krausz, E387

    R. Kienberger, E. Goulielmakis, M. Uiberacker, A. Baltuska, V. Yakovlev, F. Bammer, A. Scrinzi, Th. Westerwalbesloh, U. Kleineberg, U. Heinzmann, M. Drescher, F. Krausz:
    "Atomic transient recorder";
    Nature, 427 (2004), 817 - 821.

  82. Author: Burkhard Kittl, E311 - RIF

    B. Kittl:
    "Datenbankgestützte Verwaltung von Betriebsmitteln senkt Kosten";
    Maschinenmarkt, 34 (2001), 30 - 33.

  83. Authors: Iva Kovacic, E234 - 2; Kristina Orehounig, E259 - 3; Ardeshir Mahdavi, E259 - 3; Fritz Bleicher, E311 - FET; Alexandros Dimitrou, E311; Linus Waltenberger, E234 - 2

    I. Kovacic, K. Orehounig, A. Mahdavi, F. Bleicher, A. Dimitrou, L. Waltenberger:
    "Energy Efficient Production - Interdisciplinary, Systemic Approach through Integrated Simulation";
    Strojarstvo (invited), 55 (2013), 1; 17 - 34.

    More information

  84. Authors: Ahmet Koyun; Mehmet Emin Yurci; Binnur Sagbas; M. Numan Durakbasa, E311 - AuM

    A. Koyun, M.E. Yurci, B. Sagbas, M.N. Durakbasa:
    "Evaluation of temperature rise within articulating surfaces of artificial hip joint materials";
    Quality-Access to Success, Vol.13, S5, November 2012 (2012), 379 - 384.

    More information

  85. Authors: Lukas Kräuter; Peter Herbert Osanna, E311 - AuM

    L. Kräuter, P.H. Osanna:
    "PRECISION FOR THE ALIGNMENT OF A PARTICLE COLLIDER AT A TEMPERATURE OF 1.9 K";
    Academic Journal of Manufacturing Engineering, 2 (2004), 1; 15 - 20.

  86. Authors: Alexander Kratky, E311 - LLU; Dieter Schuöcker, E311 - LLU

    A. Kratky, D. Schuöcker:
    "Lasergestütztes Walzprofilieren als Warmumformverfahren der Zukunft";
    Maschinenmarkt, 46 (2009), 46 - 48.

    More information

  87. Authors: Alexander Kratky, E311 - LLU; Dieter Schuöcker, E311 - LLU; Friedrich Klaas; Marin Dolibasic

    A. Kratky, D. Schuöcker, F. Klaas, M. Dolibasic:
    "Lasereinsatz beim Innenhochdruckumformen";
    wt Werkstattstechnik online, 2005 (2005), 10; 789 - 792.

    More information

  88. Authors: Stefan Krenn, ACēT research GmbH; G. Vorlaufer, E134; Bernhard Scheichl, E322; Erwin Haberda, E311 - FET; Alexander Grafl, E164 - IAC

    S. Krenn, G. Vorlaufer, B. Scheichl, E. Haberda, A. Grafl:
    "Modellierung und FEM-Simulation derr Hydrodynamik in Kurbeltrieb-Gleitlagers";
    Tribologie und Schmierungstechnik (invited), 60. Jahrgang (2013), 3; 15 - 22.

  89. Authors: Friedrich Lackner; W. Riegler; Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM

    F. Lackner, W. Riegler, P.H. Osanna, M.N. Durakbasa:
    "High Precision Strain Gauge Based Sensor for Monitoring Suspension Forces at CERN";
    Measurement Science Review, Volume 8 (2008), 2; 46 - 49.

  90. Authors: Peter Lang, E308 - Gr Kozesch; Margit Christa Lang, E311; Ahmad Falahati, E308 - Gr Kozesch; Ernst Kozeschnik, E308 - Gr Kozesch

    P. Lang, M. Lang, A. Falahati, E. Kozeschnik:
    "The Effect of Si on the Precipitation Behaviour in Al-Mg-Si Alloys Studied by Thermo-kinetic Simulation and DSC Experiments";
    accepted for publication in Berg- und Hüttenmännische Monatshefte (BHM) (2013).

    More information

  91. Authors: Karl-Heinz Leitz; Holger Koch; Andreas Otto, E311 - LLU

    K. Leitz, H. Koch, A. Otto et al.:
    "Numerical simulation of process dynamics during laser beam drilling with short pulses";
    Applied Physics A: Materials Science & Processing, Volume 105 (2011), 4; 7 pages.

    More information

  92. Authors: Karl-Heinz Leitz; Benjamin Redlingshöfer; Yvonne Reg; Andreas Otto, E311 - LLU; Michael Schmidt

    K. Leitz, B. Redlingshöfer, Y. Reg, A. Otto, M Schmidt:
    "Metal Ablation with Short and Ultrashort Laser Pulses";
    Physics Procedia, Part 2 (2011), ISSN: 1875-3892; 230 - 238.

    More information

  93. Author: Gerhard Liedl, E311 - LLU

    G. Liedl:
    "Das Institut für Spanlose Fertigung und Hochleistungslasertechnik der TU Wien";
    Schweiss-&Prüftechnik (invited), 12 (2002), 196 - 198.

    More information

  94. Authors: Gerhard Liedl, E311 - LLU; Robert Bielak, E311 - LLU

    G. Liedl, R. Bielak et al.:
    "Joining of Aluminum and Steel in Car Body Manufacturing";
    Physics Procedia, Amsterdam (2011), ISSN: 1875-3892; 150 - 156.

    More information

  95. Authors: Gerhard Liedl, E311 - LLU; Alexander Kratky, E311 - LLU

    G. Liedl, A. Kratky:
    "Leichtes Umformen mit Laserlicht";
    Automotive Materials (invited), 02 (2007), 26 - 28.

  96. Authors: Gerhard Liedl, E311 - LLU; Kurt Schröder, E311 - LLU

    G. Liedl, K. Schröder et al.:
    "Excimer Laser Processing of Ferrite Video Heads";
    Applied Surface Science, 106 (1996), 374 - 378.

  97. Authors: Berislav Ljoljic, E311 - IMS; Branko Katalinic, E311 - IMS; Kemajl Stuja, E311 - IMS

    B. Ljoljic, B. Katalinic, K. Stuja:
    "Optimisation of Flexible Assembly System Using Simulation";
    International Journal of Simulation Modelling, Vol. 1 (2002), No 1/2002; 16 - 22.

  98. Authors: Berislav Ljoljic, E311 - IMS; Branko Katalinic, E311 - IMS; Kemajl Stuja, E311 - IMS; Vedran Kordic, E311 - IMS

    B. Ljoljic, B. Katalinic, K. Stuja, V. Kordic:
    "Simulation of Complex Flexible Assembly System";
    Acta Mechanica Slovaca, Vol.6 (2002), 2/2002; 117 - 122.

  99. Authors: Thomas Löscher, E101 - 6; Joachim Aichinger, E311 - LLU; Wolfgang Ebner, E311 - LLU

    T. Löscher, J. Aichinger, W. Ebner:
    "A DEV Approach to ARGESIM Benchmark C6 `Emergency Departmentī using Enterprise Dynamics";
    Simulation News Europe SNE, 18 (2008), 1; 37 - 38.

  100. Authors: Tadej Muhic; Ladislav Kosec; Gerhard Liedl, E311 - LLU

    T. Muhic, L Kosec, G. Liedl et al.:
    "Assessment of the Effect of Nd:YAG Laser Pulse Operating Parameters on the Metallurgical Characteristics of Different Tool Steels using DOE Software";
    METALURGIJA, 50 (2011), 2; 101 - 105.

    More information

  101. Authors: Anil Nomak Akdogan; M. Numan Durakbasa, E311 - AuM

    N. Nomak Akdogan, M.N. Durakbasa:
    "Thermal Cycling Experiments for Glass Moulds Surface Texture Lifetime Prediction - Evaluation with the Help of Statistical Techniques";
    Measurement, I (2008), 41/6; 697 - 703.

  102. Author: Peter Herbert Osanna, E311 - AuM

    P.H. Osanna:
    "Argentinisch-Österreichische Tage der Industrie-Technologie-Universitätszusammenarbeit";
    e&i, 1 (2005), 4; a31 - a32.

  103. Author: Peter Herbert Osanna, E311 - AuM

    P.H. Osanna:
    "The Importance of Intelligent Quality Technology and Production Metrology for Advanced Manufacturing Engineering";
    Academic Journal of Manufacturing Engineering (invited), 1 (2003), 4; 5 - 6.

  104. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM

    P.H. Osanna, M.N. Durakbasa:
    "Trends in Metrology";
    Problems of Engineering Cybernetics and Robotics, 1 (2002), 53; 15 - 24.

  105. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
    "LIFE CYCLE ASSESSMENT AND MODERN METROLOGY FOR QUALITY MANAGEMENT SYSTEMS IN INDUSTRY";
    International Journal of Production Engineering and Computers, 6 (2004), 7; 29 - 38.

  106. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
    "Structure Measurement of Workpiece Surfaces at High Precision Machining";
    Manufacturing Technology, IV (2004), IV; 68 - 74.

  107. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Mehmet Cakmakci; Rudolf Oberländer

    P.H. Osanna, M.N. Durakbasa, M. Cakmakci, R. Oberländer:
    "Cylindricity - A Well Known Problem and New Solutions";
    International Journal of Machine Tools & Manufacture, 32 (1992), 1/2; 91 - 97.

  108. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Liviu Crisan; Jorge Martin Bauer, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, L. Crisan, J.M. Bauer:
    "The Management And Exchange Of Knowledge And Innovation In Environments Of Collaborating Small And Medium Sized Enterprises";
    Communications of the IBIMA (CIBIMA), Official journal of the International Business Information Management Association, I (2009), Vol.7; 130 - 136.

  109. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Lukas Kräuter

    P.H. Osanna, M.N. Durakbasa, L. Kräuter:
    "Industrial Metrology and Interchangeable Manufacturing under the Viewpoint of Nanotechnology and Nanometrology";
    Problems of Engineering Cybernetics and Robotics, I (2008), 59; 60 - 73.

  110. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Lukas Kräuter

    P.H. Osanna, M.N. Durakbasa, L. Kräuter:
    "Industrial Metrology of the Viewpoint of Nanotechnology and Nanometrology";
    Tehnika, 3 (2009), Vol.9; 9 - 16.

  111. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Lukas Kräuter

    P.H. Osanna, M.N. Durakbasa, L. Kräuter:
    "Modern Industrial Fabrication and Manufacturing on Basis of Computer Aided Economic Design, Construction, Production, Metrology and Quality Management";
    Academic Journal of Manufacturing Engineering, Volume 6 (2008), 4/2008; 97 - 101.

  112. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Halima Tahirova, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, H. Tahirova:
    "Intelligent Flexible Dissassembly and Recycling of Used Products to SupportTotal Quality Management and Sustainability in European Indusry";
    International Journal Total Quality Management & Excellence, I (2005), 3 Vol. 33; 1 - 4.

  113. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Gyula Vagszegi, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, G. Vagszegi:
    "Laser optical roughness measurement";
    Measurement, 1 (1988), Volume 6, Issue 1; 33 - 36.

  114. Authors: Peter Herbert Osanna, E311 - AuM; Kamran Rezaie; M. Numan Durakbasa, E311 - AuM; Christian Heiss

    P.H. Osanna, K. Rezaie, M.N. Durakbasa, C.p. Heiss:
    "Form measurements - A bridge between production metrology and biomechanics";
    International Journal of Machine Tools & Manufacture, Vol.35 (1995), 165 - 168.

  115. Authors: Peter Herbert Osanna, E311 - AuM; Gottfried Slanar, E311 - AuM; M. Numan Durakbasa, E311 - AuM

    P.H. Osanna, G. Slanar, M.N. Durakbasa:
    "Messtechnik als Grundlage für die Steigerung der Qualität und Umweltverträglichkeit technischer Produkte und Anlagen";
    e&i, 1 (2003), N.5; 143 - 148.

  116. Authors: Andreas Otto, E311 - LLU; Holger Koch

    A. Otto, H. Koch et al.:
    "Numerical Simulation - A Versatile Approach for Better Understanding Dynamics in Laser Material Processing";
    Physics Procedia (invited), Part 2 (2011), ISSN: 1875-3892; 11 - 20.

    More information

  117. Authors: Haris Pasic; Milan Pudar; Norbert Enzinger; Julia Ivanova; Jürgen Bruckner; Stefan Hampel; Gerhard Liedl, E311 - LLU; Werner Karner; Gunter Figner; Thomas Weirather; Alois Leitner

    H. Pasic, M. Pudar, N. Enzinger, J. Ivanova, J. Bruckner, S. Hampel, G. Liedl, W. Karner, G. Figner, T. Weirather, A. Leitner:
    "Einsatz unterschiedlicher Schweißverfahren zum Verbinden von Stahl mit Aluminium im Karosseriebau";
    Schweiss-&Prüftechnik, Sonderband (2009), 25 - 27.

    More information

  118. Authors: Rok Petkovsek, University Ljubljana; Vid Novak, LPKF Laser; Ferdinand Bammer, E311 - LLU; Janez Mozina, Univ. Ljubjana; Bostjan Podobnik, LPKF Laser

    R. Petkovsek, V. Novak, F. Bammer, J. Mozina, B. Podobnik:
    "Power scaling of AOM-switched lasers with SCPEM-based time-multiplexing";
    Optics Express, 19 (2011), 21; 19855 - 19860.

    More information

  119. Authors: Rok Petkovsek, University Ljubljana; Julien Saby, Eolite Systems; Francois Salin, Eolite Systems; Thomas Schumi, E311 - LLU; Ferdinand Bammer, E311 - LLU

    R. Petkovsek, J. Saby, F. Salin, T. Schumi, F. Bammer:
    "SCPEM-Q-switching of a fiber-rod-laser";
    Optics Express, 20 (2012), 7; 7415 - 7421.

    More information

  120. Authors: Konrad Pfadenhauer, E311 - RIF; Burkhard Kittl, E311 - RIF

    K. Pfadenhauer, B. Kittl:
    "Prozessmanagement in serviceorientierten Architekturen";
    ERP Management (invited), 1 (2006), 1; 40 - 42.

    More information

  121. Authors: Daniel Pohselt; Christoph Dorn, E311 - FET; Iva Kovacic, E234 - 2; Christoph Achammer, E234 - 2; Fritz Bleicher, E311 - FET

    D. Pohselt, C. Dorn, I. Kovacic, C. Achammer, F. Bleicher:
    "Genen den Strom";
    Industriemagazin (invited), 04/10 (2010), 4; 44 - 47.

    More information

  122. Authors: Robert Pospichal, E311 - LLU; Robert Bielak, E311 - LLU; Gerhard Liedl, E311 - LLU

    R. Pospichal, R. Bielak, G. Liedl:
    "SCWTEX - Simultaneous Cutting And Welding Of Textiles";
    ACTA TECHNICA CORVINIENSIS - Bulletin of Engineering, 1 (2012), 117 - 121.

    More information

  123. Authors: Robert Pospichal, E311 - LLU; Gerhard Liedl, E311 - LLU

    R. Pospichal, G. Liedl:
    "Laser ablation of polyethylene terephthalate non-woven fabrics";
    Annals Of Faculty Engineering Hunedoara - International Journal Of Engineering, 1 (2014), 12; 63 - 68.

    More information

  124. Authors: Robert Pospichal, E311 - LLU; Gerhard Liedl, E311 - LLU

    R. Pospichal, G. Liedl:
    "Simulation of periodic nanostructures fabricated by multi-beam interference of an ultra-short pulse laser";
    Tehnicki Vjesnik-Technical Gazette, 20 (2013), 1; 131 - 136.

    More information

  125. Authors: Robert Pospichal, E311 - LLU; Gerhard Liedl, E311 - LLU

    R. Pospichal, G. Liedl:
    "Simulation Of The Resulting Intensity Distribution By Multi‐beam Interference Of An Ultra‐short Pulse Laser";
    ACTA TECHNICA CORVINIENSIS - Bulletin of Engineering, 5 (2012), 4; 85 - 90.

    More information

  126. Authors: Wolfgang Prähauser; Fritz Bleicher, E311 - FET

    W. Prähauser, F. Bleicher:
    "Innovation meets Education 2012";
    Online - zerspanungstechnik.com, 11.03.2013 (2013), 2 pages.

  127. Authors: Valentin Pryanichnikov; Branko Katalinic, E311 - IMS; A Platonov

    V. Pryanichnikov, B. Katalinic, A. Platonov:
    "Application of autonomius mobile robots AMUR for modelling of elements of selforganising systems";
    Intelligent and Adoptive Robots (invited), Vol.6 (2011), 1-2; 8 - 18.

  128. Authors: Falko Puschitz, E311 - FET; Fritz Bleicher, E311 - FET

    F. Puschitz, F. Bleicher:
    "Auf der Pole-Position";
    Inspect, 06 (2009), 42 - 43.

  129. Authors: Falko Puschitz, E311 - FET; Fritz Bleicher, E311 - FET

    F. Puschitz, F. Bleicher:
    "Bestimmung des Bearbeitungsgrats";
    Quality Engineering, 05 (2009), 22.

  130. Authors: Falko Puschitz, E311 - FET; Fritz Bleicher, E311 - FET

    F. Puschitz, F. Bleicher:
    "Maschinenabnahme einer Anlage zum elektrochemischen Fräsen mit Hilfe Nexiv VMR 3020";
    Industrial Quality, 01 (2011), 28 - 29.

    More information

  131. Authors: Falko Puschitz, E311 - FET; Fritz Bleicher, E311 - FET

    F. Puschitz, F. Bleicher:
    "Mit Linse und Laser";
    Quality Engineering, 7-8 (2008), 72 - 73.

    More information

  132. Authors: Falko Puschitz, E311 - FET; Fritz Bleicher, E311 - FET; Thomas Mikats, E311 - FET

    F. Puschitz, F. Bleicher, T. Mikats:
    "CNC-Lösung Made by B&R";
    Automotion, 11 (2009), 54 - 57.

    More information

  133. Authors: R.V. Rao; D. Singh; Fritz Bleicher, E311 - FET; Christoph Dorn, E311 - FET

    R. Rao, D. Singh, F. Bleicher, C. Dorn:
    "Weighted Euclidean distance-based approach as a multiple attribute decision making method for manufacturing situations";
    International Journal of Multicriteria Decision Making (invited), International Journal of Multicriteria Decision Making (2012), 3; 225 - 240.

  134. Authors: Manel Rodríguez Ripoll, ACēT research GmbH; Franz Heindl, ACēT research GmbH; Christoph Lechner, E311 - FET; Christoph Habersohn, E311 - FET; Martin Jech, AC2T; Fritz Bleicher, E311 - FET

    M. Rodríguez Ripoll, F. Heindl, C. Lechner, Ch. Habersohn, M. Jech, F. Bleicher:
    "Improving the wear resistance of functional surfaces using the machine hammer peening technique";
    Tribology - Materials, Surfaces & Interfaces (invited), Volume 8 (2014), 1; 21 - 26.

  135. Authors: Binnur Sagbas; M. Numan Durakbasa, E311 - AuM

    B. Sagbas, M.N. Durakbasa:
    "Effect of surface patterning on frictional heating of vitamin E blended UHMWPE";
    WEAR, Issues 1-2 (2013), Volume 303; 313 - 320.

    More information

  136. Authors: Binnur Sagbas; M. Numan Durakbasa, E311 - AuM

    B. Sagbas, M.N. Durakbasa:
    "Evaluating Frictional Temperature Rise in Sliding Surface of Artificial Hip Joint Materials with Different Loading Conditions";
    Acta Physica Polonica A, Vol. 123 (2013) (2013), 2; 453 - 455.

  137. Authors: Binnur Sagbas; M. Numan Durakbasa, E311 - AuM

    B. Sagbas, M.N. Durakbasa:
    "Measurement of Wear in Orthopedic Prosthesis";
    Acta Physica Polonica A, 1 (2012), Vol. 121, No. 1; 4 pages.

  138. Authors: Binnur Sagbas; M. Numan Durakbasa, E311 - AuM

    B. Sagbas, M.N. Durakbasa:
    "Modelling and optimization of biotribological testing parameters on frictional heating of vitamin E blended UHMWPE with the help of statistical techniques";
    Measurement, Volume 54 (2014), 249 - 255.

  139. Authors: Binnur Sagbas; M. Numan Durakbasa, E311 - AuM

    B. Sagbas, M.N. Durakbasa:
    "Surface Texturing of Vitamin E Blended UHMWPE for Reduction of Wear";
    Acta Physica Polonica A, 1, Volume 125 (2014), 2; 481 - 483.

  140. Authors: Kurt Schröder, E311 - LLU; Gerhard Liedl, E311 - LLU

    K. Schröder, G. Liedl et al.:
    "Measurement and Modelling of Ozone and NOx Emissions during CO2 Laser Beam Welding";
    Lasers in Engineering, 5 (1997), 313 - 328.

  141. Author: Dieter Schuöcker, E311 - LLU

    D. Schuöcker:
    "Laser - Laborgerät oder Werkzeug";
    Metall (invited), 1-2 (2006), 22 - 25.

  142. Author: Dieter Schuöcker, E311 - LLU

    D. Schuöcker:
    "Mathematical modelling of laser assisted deep drawing";
    Journal of Materials Processing Technology, 115 (2001), 104 - 107.

  143. Author: Dieter Schuöcker, E311 - LLU

    D. Schuöcker:
    "Neueste Entwicklungen der Lasertechnik - Teil 1";
    Metall (invited), 5 (2006), 12 - 17.

  144. Author: Dieter Schuöcker, E311 - LLU

    D. Schuöcker:
    "Neueste Entwicklungen der Lasertechnik - Teil 2";
    Metall (invited), 6 (2006), 24 - 27.

  145. Author: Dieter Schuöcker, E311 - LLU

    D. Schuöcker:
    "The Importance of High Power Laser Technology for the New Millennium";
    Journal of Production Engineering, 3 (2000), 3.

  146. Authors: Armin Scrinzi, E387; V Yakovlev; Olga Smirnova, E387; Ferdinand Bammer, E311 - LLU

    A. Scrinzi, V. Yakovlev, O. Smirnova, F. Bammer:
    "Attosecond streaking measurements";
    Journal of Modern Optics (invited), Vol 52 (2005), 2-3; 395 - 410.

    More information

  147. Authors: P Sejc; Robert Bielak, E311 - LLU

    P. Sejc, R. Bielak et al.:
    "Computer simulation of heat affected zone during MIG brazing of zinc-coated steel sheets";
    Kovove Materialy, 44 (2006), 225 - 234.

  148. Authors: Roman Spietschka; Fritz Bleicher, E311 - FET

    R. Spietschka, F. Bleicher:
    "Strömungssimulation in der Reinraumtechnik";
    GIT ReinRaum Technik, 3/01 (2001), 14 - 16.

  149. Authors: Daniel Stehle; Alois Schmid; Matthias Oechsner; Fritz Bleicher, E311 - FET; Thomas Flatz, E311 - FET

    D. Stehle, A. Schmid, M. Oechsner, F. Bleicher, T. Flatz:
    "Strukturieren von Stahlproben zur Steigerung der Haftfestigkeit einer thermisch gespritzten Kupferbasislegierung zur Untersuchung der Einsatzpotenziale an lagerschalenlosen Pleuelstangen";
    Thermal Spray Bulletin (invited), 2 (2013), 110 - 116.

  150. Authors: Ken J. Stout; M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM

    K.J. Stout, M.N. Durakbasa, P.H. Osanna:
    "Quality assurance - Have we specified it the wrong way around?";
    WEAR, 5/6 (2009), 266; 511 - 514.

  151. Authors: Y-C Tsai; Karl-Heinz Leitz; Andreas Otto, E311 - LLU

    Y. Tsai, K. Leitz, A. Otto et al.:
    "Parallel optical trap assisted nanopatterning on rough surfaces";
    Nanotechnology, 1 (2012), 23; 1 - 5.

    More information

  152. Authors: Klaus Wichart; Julia Ivanova; Jürgen Bruckner; Norbert Enzinger; Gunter Figner; Gerhard Liedl, E311 - LLU; Heinz Basalka; Alois Leitner

    K. Wichart, J. Ivanova, J. Bruckner, N. Enzinger, G. Figner, G. Liedl, H. Basalka, A. Leitner:
    "Einsatz von Bimetallen für Hybridverbindungen";
    Schweiss-&Prüftechnik, Sonderband (2009), 28 - 31.

    More information

  153. Authors: Cem Yurci; Asli Gunay; M. Numan Durakbasa, E311 - AuM

    C. Yurci, A. Gunay, M.N. Durakbasa:
    "Performance Determination and Calibration of CMMs on the Basis of GPS Standards";
    Quality-Access to Success, Vol.13, S5, November 2012 (2012), 291 - 298.

    More information

  154. Author: Richard Zemann, E311 - FET

    R. Zemann:
    ""Federn lassen" mit Carbon";
    Technikreport (invited), 11 (2013), 58.

  155. Author: Richard Zemann, E311 - FET

    R. Zemann:
    "Aufbohrbedarf gesucht";
    Factory (invited), 06/2014 (2014), 22 - 24.

  156. Author: Richard Zemann, E311 - FET

    R. Zemann:
    "Faserwerkstoffe: Federleicht";
    Online - innovationsreport.de, 18.11.13 (2013), 2 pages.

  157. Author: Richard Zemann, E311 - FET

    R. Zemann:
    "Federherstellung aus leichten Faserwerkstoffen";
    www.derStandard.at, 18.11.13 (2013).

  158. Author: Richard Zemann, E311 - FET

    R. Zemann:
    "Federleicht - Masseeinsparung ist ein wichtiges Thema";
    Österreich Journal, 125 (2013), 1 pages.

  159. Author: Richard Zemann, E311 - FET

    R. Zemann:
    "Federleicht - Weg mit überflüssigen Kilos";
    TU Bulletin, 18.02.13 (2013), 97; 2 pages.

  160. Author: Richard Zemann, E311 - FET

    R. Zemann:
    "Federleichte Federn aus Karbon offenbar ohne jede Ermüdung";
    Online - ingenieur.de, 19.11.13 (2013), 2 pages.

  161. Author: Richard Zemann, E311 - FET

    R. Zemann:
    "Federn aus Faser-Kunststoff statt aus Stahl";
    Online - futurezone.at, 18.11.13 (2013), 2 pages.

  162. Author: Richard Zemann, E311 - FET

    R. Zemann:
    "Federung - Federleichte Federn";
    konstruktionspraxis.vogel.de, 11.12.13 (2013), 2 pages.

  163. Author: Richard Zemann, E311 - FET

    R. Zemann:
    "Fotostrecke Fibrecut: Die besten Zerspaner bei FKV";
    Online factorynet.at (invited), 20.06.2014 (2014), 1 pages.

  164. Author: Richard Zemann, E311 - FET

    R. Zemann:
    "Herstellungsverfahren für Federn aus Fasern entwickelt";
    Online - science.apa.at, 18.11.13 (2013), 1 pages.

  165. Author: Richard Zemann, E311 - FET

    R. Zemann:
    "Leicht, leichter, Fibrecut!";
    Technik Report (invited), Technik Report - Band 6 (2013), 6; 22 - 23.

  166. Author: Richard Zemann, E311 - FET

    R. Zemann:
    "Leichte Werkstoffe, schwere Aufgaben";
    Österreichische Betriebstechnik, 3/4 (2014), 46 - 47.

  167. Author: Richard Zemann, E311 - FET

    R. Zemann:
    "Leichte Werkstoffe, schwere Aufgaben";
    Online - innovationsreport.de, 20.02.2014 (2014), 2 pages.

  168. Author: Richard Zemann, E311 - FET

    R. Zemann:
    "Leichte Werkstoffe, schwere Aufgaben";
    Online - myScience.at, 19.02.2014 (2014), 3 pages.

  169. Author: Richard Zemann, E311 - FET

    R. Zemann:
    "Leichte Werkstoffe, schwere Aufgaben";
    TU Wien Presseaussendung, 19.02.2014 (2014), 1 - 4.

  170. Author: Richard Zemann, E311 - FET

    R. Zemann:
    "Leichte Werkstoffe, schwere Aufgaben";
    Online - WorldNews (WN), 19.02.2014 (2014), 1 pages.

  171. Author: Richard Zemann, E311 - FET

    R. Zemann:
    "Leichte Werkstoffe, schwere Aufgaben";
    Österreich Journal, 128/27.02.14 (2014), 2 pages.

  172. Author: Richard Zemann, E311 - FET

    R. Zemann:
    "Produktion_Federleicht";
    Factory, Dez.-Jän. 2013-2014 (2013), 121.

  173. Author: Richard Zemann, E311 - FET

    R. Zemann:
    "Spezielle Bearbeitungsmethoden der TU Wien für Faserverbundmaterialien";
    VDWF im Dialog (invited), 1 (2014), 1 pages.

  174. Author: Richard Zemann, E311 - FET

    R. Zemann:
    "Technologietransfer zum gegenseitigen Nutzen - Messeguide zur TUday14";
    Der Standard (invited), Promotionsbeilage zur Tageszeitung (2014), 49 - 50.

  175. Authors: Richard Zemann, E311 - FET; Fritz Bleicher, E311 - FET; Reinhard Zisser-Pfeifer, E311 - FET

    R. Zemann, F. Bleicher, R. Zisser-Pfeifer:
    "Praxiserfahrungen mit der Technologie der elektrochemischen Mikrobearbeitung mit ultrakurzen Pulsen";
    Galvanotechnik, 103 (2012), 4; 722 - 725.

  176. Authors: Richard Zemann, E311 - FET; Ralph Hufschmied

    R. Zemann, R. Hufschmied:
    "Auf der Suche nach der Benchmark";
    Carbon Composites Magazin, 2 (2013), 37.


Contributions to Books


  1. Authors: Ali Afjehi-Sadat, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM

    A. Afjehi-Sadat, M.N. Durakbasa, P.H. Osanna:
    "Design and manufacture of measuring instruments (chapter 6)";
    in: "Measurement in Technology - Volume I", issued by: Vienna University of Technology; TU Wien, 2005, ISBN: 80-89112-05-6, 153 - 167.

  2. Authors: Ali Afjehi-Sadat, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Ken J. Stout; Peter Herbert Osanna, E311 - AuM; Jean-Michel Ruiz

    A. Afjehi-Sadat, M.N. Durakbasa, K.J. Stout, P.H. Osanna, J.M. Ruiz:
    "Measurement of surface roughness, waviness and the primary profile (chapter 13)";
    in: "Measurement in Technology - Volume II", issued by: Vienna University of Technology; TU Wien, 2005, ISBN: 80-89112-05-6, 382 - 403.

  3. Authors: Ali Afjehi-Sadat, E311 - AuM; Peter Herbert Osanna, E311 - AuM
    Other persons involved: Wojciech Zebala; Jozef Beno

    A. Afjehi-Sadat, P.H. Osanna:
    "Importance of Standardization for Successful Development of Nanotechnology";
    in: "Production Process in Mechanical Engineering", W. Zebala, J. Beno (ed.); Cracow University of Technology - Technical University of Kosice, Cracow, 2007, ISBN: 978-83-7242-428-0, 43 - 46.

  4. Authors: Ali Afjehi-Sadat, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Janos Kundrak; Viktoria Bana

    A. Afjehi-Sadat, P.H. Osanna, J. Kundrak, V. Bana:
    "Evaluation of 3D Surface Topography of Hard Turned and Ground Gear's Bore Holes";
    in: "Production Process in Mechanical Engineering Research Reports", issued by: Cracow University of Technology - Technical University of Kosice; Cracow University of Technology - Technical University of Kosice, Slovakia, 2006, ISBN: 80-8073-568-9, 141 - 146.

  5. Authors: Iman Ayatollahi, E311 - RIF; Martin Hackhofer; Burkhard Kittl, E311 - RIF; Florian Pauker, E311

    I. Ayatollahi, M. Hackhofer, B. Kittl, F. Pauker:
    "New approach for oee calculation of Cnc machines based on OPC UA";
    in: "DAAAM International Scientific Book 2013", DAAAM International Vienna, Wien, 2013, ISBN: 978-3-901509-94-0, 895 - 902.

  6. Author: Ferdinand Bammer, E311 - LLU
    Other person involved: Frank Columbus

    F. Bammer:
    "Single Crystal Photo-Elastic Modulators";
    in: "High-Power and Femtosecond Lasers: Properties, Materials and Applications", F. Columbus (ed.); issued by: Paul-Henri Barret, Michael Palmer; Nova Science Publishers, Inc, 2009, ISBN: 978-1-60741-009-6, 71 - 123.

    More information

  7. Authors: Ferdinand Bammer, E311 - LLU; Thomas Schumi, E311 - LLU; Jose Carballido Souto, E311 - LLU; Johanna Bachmair, E311 - LLU; Delaram Feitl, Stubenbastei; Immanuel Gerschenson, Stubenbastei; Matej Paul, Stubenbastei; Andreas Nessmann, Stubenbastei

    F. Bammer, T. Schumi, J. Carballido Souto, J. Bachmair, D. Feitl, I. Gerschenson, M. Paul, A. Nessmann:
    "Q-Switching with Single Crystal Photo-Elastic Modulators";
    in: "Laser Systems for Applications", InTech, 2011, ISBN: 978-953-307-429-0, 14 pages.

    More information

  8. Author: Dominik Berger, E311 - FET
    Other persons involved: Fritz Bleicher, E311 - FET; Janez Kopac; Lothar W. Meyer; Volker Stich

    D. Berger:
    "Bearbeitung faserverstärkter Materialien";
    in: "HPM - High Performance Manufacturing", F. Bleicher, J. Kopac, L. Meyer, V. Stich (ed.); issued by: Institut für Fertigungstechnik; Institut für Fertigungstechnik, Wien, 2008, ISBN: 978-3-200-01355-1, 169 - 184.

  9. Authors: Dominik Berger, E311 - FET; Fritz Bleicher, E311 - FET; Christoph Dorn, E311 - FET; Falko Puschitz, E311 - FET
    Other person involved: Branko Katalinic, E311 - IMS

    D. Berger, F. Bleicher, C. Dorn, F. Puschitz:
    "Optimised Machining of fibre reinforced materials";
    in: "DAAAM International Scientific Book 2008", B. Katalinic (ed.); issued by: Publisher DAAAM International Vienna; DAAAM International Vienna, Wien, 2008, ISBN: 3-901509-69-0.

  10. Authors: Johannes Bernreiter, E311 - FET; Christoph Dorn, E311 - FET; Ivan Ibrishimov, E311; Reinhard Zisser-Pfeifer, E311 - FET; Norman Herzig, TU Chemnitz
    Other persons involved: Fritz Bleicher, E311 - FET; Janez Kopac; Lothar W. Meyer; Volker Stich

    J. Bernreiter, C. Dorn, I. Ibrishimov, R. Zisser-Pfeifer, N. Herzig:
    "Optimierung des Tieflochbohrprozesses von hochlegierten Stählen";
    in: "HPM - High Performance Manufacturing", F. Bleicher, J. Kopac, L. Meyer, V. Stich (ed.); issued by: Institut für Fertigungstechnik; Institut für Fertigungstechnik, Wien, 2008, ISBN: 978-3-200-01355-1, 142 - 168.

  11. Author: Fritz Bleicher, E311 - FET
    Other person involved: Klaus-Jörg Conrad

    F. Bleicher:
    "Werkzeugmaschinen mit parallelkinematischen Strukturen";
    in: "Taschenbuch der Werkzeugmaschinen", K.-J. Conrad (ed.); Carl Hanser Verlag, 2002, ISBN: 3-446-21859-9, 787 - 792.

  12. Authors: Fritz Bleicher, E311 - FET; Christoph Dorn, E311 - FET; Matthias Stark, E311
    Other person involved: Branko Katalinic, E311 - IMS

    F. Bleicher, C. Dorn, M. Stark:
    "Performance analysis of machine tools";
    in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"", B. Katalinic (ed.); issued by: DAAAM international Vienna; DAAAM International Vienna, Vienna, 2009, ISBN: 978-3-901509-70-4, 1793 - 1794.

    More information

  13. Authors: Fritz Bleicher, E311 - FET; Norman Herzig, TU Chemnitz
    Other persons involved: Fritz Bleicher, E311 - FET; Janez Kopac; Lothar W. Meyer; Volker Stich

    F. Bleicher, N. Herzig:
    "Zusammenhang zwischen dynamischen Werkstoffkennwerten und spezifischer Schnittkraft";
    in: "HPM - High Performance Manufacturing", F. Bleicher, J. Kopac, L. Meyer, V. Stich (ed.); issued by: Institut für Fertigungstechnik; Institut für Fertigungstechnik, Wien, 2008, ISBN: 978-3-200-01355-1, 68 - 89.

  14. Authors: Fritz Bleicher, E311 - FET; Burkhard Kittl, E311 - RIF
    Other person involved: Dirk Biermann

    F. Bleicher, B. Kittl:
    "Manufacturing Execution Systems für die spanende Fertigung";
    in: "Spanende Fertigung", D. Biermann (ed.); Vulkan-Verlag, Essen, 2012, ISBN: 978-3-8027-2965-2, 412 - 418.

  15. Authors: Ismail Bogrekci; Pinar Demircioglu; M. Numan Durakbasa, E311 - AuM

    I. Bogrekci, P. Demircioglu, M.N. Durakbasa:
    "Comparison between 3D Digital and Optical Microscopes for the Surface Measurement using Image Processing Techniques";
    in: "Laser Metrology for Precision Measurement and Inspection in Industry (LMPMI) 2011", issued by: VDI Berichte Nr. 2156; VDI Verlag GmbH, Düsseldorf, 2011, ISSN: 0083-5560, 39 - 47.

  16. Authors: Marios Cassimatis; Peter Herbert Osanna, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM; Jean-Michel Ruiz

    M. Cassimatis, P.H. Osanna, A. Afjehi-Sadat, J.M. Ruiz:
    "Measurement of torque (chapter 20)";
    in: "Measurement in Technology - Volume II", issued by: Vienna university of Technology; TU Wien, 2005, ISBN: 80-89112-05-6, 522 - 531.

  17. Author: Christoph Dorn, E311 - FET
    Other persons involved: Fritz Bleicher, E311 - FET; Janez Kopac; Lothar W. Meyer; Volker Stich

    C. Dorn:
    "Automatisierung von Entgratprozessen";
    accepted for publication in: "HPM - High Performance Manufacturing", F. Bleicher, J. Kopac, L. Meyer, V. Stich (ed.); issued by: Institut für Fertigungstechnik; Institut für Fertigungstechnik, Wien, 2008, ISBN: 978-3-200-01355-1, 194 - 210.

  18. Authors: Christoph Dorn, E311 - FET; Fritz Bleicher, E311 - FET; Christoph Einspieler, E311 - FET
    Other persons involved: Fritz Bleicher, E311 - FET; Janez Kopac; Lothar W. Meyer; Volker Stich

    C. Dorn, F. Bleicher, C. Einspieler:
    "Verbesserung der Maschinengenauigkeit";
    in: "HPM - High Performance Manufacturing", F. Bleicher, J. Kopac, L. Meyer, V. Stich (ed.); issued by: Institut für Fertigungstechnik; Institut für Fertigungstechnik, Wien, 2008, ISBN: 978-3-200-01355-1, 128 - 141.

  19. Author: M. Numan Durakbasa, E311 - AuM

    M.N. Durakbasa:
    "Prüfmittelmanagement und Prüfmittelüberwachung in der Koordinatenmesstechnik";
    in: "Koordinatenmesstechnik Genauigkeit - Erfahrungen - Innovationen", issued by: VDI/VDE - Gesellschaft; VDI Verlag GmbH, Düsseldorf, 2001, ISBN: 3-18-091618-4, 157 - 168.

  20. Author: M. Numan Durakbasa, E311 - AuM

    M.N. Durakbasa:
    "RECHNERUNTERSTÜTZTE INTELLIGENTE PRÜFMITTELVERWALTUNG UND -ÜBERWACHUNG FÜR GEOMETRISCHE GRÖSSEN";
    in: "Computer-Aided Systems for Manufacture and Measurement of Machine Elements", Wydawnictwo, Kielce, PL, 2003, ISBN: 83-88906-30-5, 91 - 98.

  21. Authors: M. Numan Durakbasa, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM; Peter Herbert Osanna, E311 - AuM

    M.N. Durakbasa, A. Afjehi-Sadat, P.H. Osanna:
    "Measurement of length, position, dimension (chapter 12)";
    in: "Measurement in Technology - Volume II", issued by: Vienna University of Tecnology; TU Wien, 2005, ISBN: 80-89112-05-6, 354 - 381.

  22. Authors: M. Numan Durakbasa, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM; Peter Herbert Osanna, E311 - AuM

    M.N. Durakbasa, A. Afjehi-Sadat, P.H. Osanna:
    "Uncertainty of measurement (chapter 27)";
    in: "Measurement in Technology - Volume II", issued by: Vienna University of Technology; TU Wien, 2005, ISBN: 80-89112-05-6, 641 - 662.

  23. Authors: M. Numan Durakbasa, E311 - AuM; Pinar Demircioglu; Gökcen Bas, E311 - AuM

    M.N. Durakbasa, P. Demircioglu, G. Bas:
    "Metrological Evaluations at Micro- and Nanoscaled Surface Characteristics via Process Management Approach";
    in: "Development of Surface Metrology, Pawel Pawlus (ed.) et al.", issued by: University of Bielsko-Biala; Development of Surface Metrology, Pawel Pawlus (ed.) et al., Bielsko-Biala, Polen, 2012, ISBN: 978-83-63713-24-9, 45 - 56.

  24. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM
    Other person involved: Frantisek Trebuna

    M.N. Durakbasa, P.H. Osanna:
    "Developments of Surface Measurement and Evaluation of Biomedical Structures";
    in: "Acta Mechanica Slovaca", F. Trebuna et al. (ed.); issued by: Faculty of Mechanical Engineering, Technical University in Kosice; Faculty of Mechanical Engineering, Technical University in Kosice, Kosice, 2002, ISSN: 1335-2393, 25 - 29.

  25. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Liviu Crisan; Lukas Kräuter
    Other persons involved: Stanislaw Adamczak; Peter Herbert Osanna, E311 - AuM

    M.N. Durakbasa, P.H. Osanna, L. Crisan, L. Kräuter:
    "Metrologie und Technologie im Nanometer- und Picometer-Bereich";
    in: "Science Report", S. Adamczak, P.H. Osanna (ed.); issued by: Kielce University of Technology; Wydawnictwo Politechniki Swietokrzyskiej, Kielce, 2008, ISBN: 978-83-88906-57-2, 9 - 19.

  26. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Rudolf Oberländer; Georg Kappis
    Other person involved: Tilo Pfeifer

    M.N. Durakbasa, P.H. Osanna, R. Oberländer, G. Kappis:
    "The Utilization of CMM's for the Comprehensive Analysis of Macro- and - and Micro-Geometry of Workpieces";
    in: "Dimensional Metrology in Production and Quality Control", T. Pfeifer (ed.); issued by: Gesellschaft Mess- und Automatisierungstechnik; VDI Verlag GmbH, Düsseldorf, 1989, ISBN: 3-18-090761-4, 119 - 124.

  27. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Mehmet Emin Yurci; Anil Nomak Akdogan
    Other persons involved: Erian Armanios; Yiu-Wing Mai; Fred H. Wöhlbier; M. Newaz Golam

    M.N. Durakbasa, P.H. Osanna, M.E. Yurci, N. Nomak Akdogan:
    "High Precision Measurement and Evaluation of the Fine Mould Surface Structures, in Measurement Technology and Intelligent Instruments";
    in: "Measurement Technology and Intelligent Instruments VIII", E. Armanios, Y. Mai, F. Wöhlbier, M. Golam (ed.); issued by: Trans Tech Publications Ltd; Trans Tech Publications Ltd., Switzerland, 2008, ISSN: 1013-9826, 221 - 224.

  28. Authors: Georg Geiger, E311 - FET; Fritz Bleicher, E311 - FET; Falko Puschitz, E311 - FET
    Other persons involved: Fritz Bleicher, E311 - FET; Janez Kopac; Lothar W. Meyer; Volker Stich

    G. Geiger, F. Bleicher, F. Puschitz:
    "Zerspanungsspezifische Untersuchungen";
    accepted for publication in: "HPM - High Performance Manufacturing", F. Bleicher, J. Kopac, L. Meyer, V. Stich (ed.); issued by: Institut für Fertigungstechnik; Institut für Fertigungstechnik, Wien, 2008, ISBN: 978-3-200-01355-1, 26 - 41.

  29. Authors: Georg Geiger, E311 - FET; Christoph Dorn, E311 - FET; Norman Herzig, TU Chemnitz
    Other persons involved: Fritz Bleicher, E311 - FET; Janez Kopac; Lothar W. Meyer; Volker Stich

    G. Geiger, C. Dorn, N. Herzig:
    "Frässtrategien für Schruppbearbeitung von Stahlguss";
    accepted for publication in: "HPM - High Performance Manufacturing", F. Bleicher, J. Kopac, L. Meyer, V. Stich (ed.); issued by: Institut für Fertigungstechnik; Institut für Fertigungstechnik, Wien, 2008, ISBN: 978-3-200-01355-1, 114 - 127.

  30. Authors: Georg Geiger, E311 - FET; Falko Puschitz, E311 - FET
    Other persons involved: Fritz Bleicher, E311 - FET; Janez Kopac; Lothar W. Meyer; Volker Stich

    G. Geiger, F. Puschitz:
    "Verschleiß und Kraftfortschrittsmessung in der Praxis am Beispiel des Stirnplanfräsens";
    accepted for publication in: "HPM - High Performance Manufacturing", F. Bleicher, J. Kopac, L. Meyer, V. Stich (ed.); issued by: Institut für Fertigungstechnik; Institut für Fertigungstechnik, Wien, 2008, ISBN: 978-3-200-01355-1, 80 - 96.

  31. Authors: Georg Geiger, E311 - FET; Falko Puschitz, E311 - FET; Fritz Bleicher, E311 - FET
    Other person involved: Branko Katalinic, E311 - IMS

    G. Geiger, F. Puschitz, F. Bleicher:
    "New approach of determining cutting forces";
    accepted for publication in: "DAAAM International Scientific Book 2008", B. Katalinic (ed.); issued by: DAAAM International; DAAAM International Vienna, Wien, 2008, ISBN: 3-901509-69-0.

  32. Author: Christoph Habersohn, E311 - FET
    Other persons involved: Fritz Bleicher, E311 - FET; Janez Kopac; Lothar W. Meyer; Volker Stich

    Ch. Habersohn:
    "Fräsen mit weit auskragendem Werkzeug";
    accepted for publication in: "HPM - High Performance Manufacturing", F. Bleicher, J. Kopac, L. Meyer, V. Stich (ed.); issued by: Institut für Fertigungstechnik; Institut für Fertigungstechnik, Wien, 2008, ISBN: 978-3-200-01355-1, 185 - 193.

  33. Authors: Christoph Habersohn, E311 - FET; Fritz Bleicher, E311 - FET

    Ch. Habersohn, F. Bleicher:
    "Controller Concept for a Highly Parallel Machine Tool";
    in: "Engineering Transactions", Polish Academy of Sciences - Institute of Fundamental Technological Research, Warschau, 2012, ISSN: 0867-888x, 315 - 332.

  34. Authors: Kkk Hrubina; Aaa Jadlovska; Branko Katalinic, E311 - IMS; Emil Wessely
    Other person involved: Branko Katalinic, E311 - IMS

    K. Hrubina, A. Jadlovska, B. Katalinic, E. Wessely:
    "Optimal Control Problems for Systems Solved by Algorithms of Algebraic Methods";
    in: "DAAAM International Scientific Book 2004", B. Katalinic (ed.); issued by: Wien; DAAAM International Vienna, Wien, 2004, (invited), ISBN: 3-901509-38-0, 283 - 294.

  35. Authors: Kkk Hrubina; Jaroslav Novak-Marcincin; Aaa Jadlovska; Branko Katalinic, E311 - IMS

    K. Hrubina, J Novak-Marcincin, A. Jadlovska, B. Katalinic:
    "Optimal control of complex processes and vector optimalization";
    in: "DAAAM International Scientific Book 2005", issued by: DAAAM International Vienna; DAAAM International Vienna, Vienna, 2005, (invited), ISBN: 3-901509-43-7, 225 - 252.

  36. Authors: Aaa Jadlovska; Kkk Hrubina; Jaroslav Novak-Marcincin; Branko Katalinic, E311 - IMS

    A. Jadlovska, K. Hrubina, J Novak-Marcincin, B. Katalinic:
    "Algorithms for optimal decision making and processes control";
    in: "DAAAM International Scientific Book 2005", issued by: DAAAM International Vienna; DAAAM International Vienna, Vienna, 2005, (invited), ISBN: 3-901509-43-7, 253 - 290.

  37. Authors: L. Kandrac; Ildiko Mankova; M. Vrabel; Jozef Beno; M. Numan Durakbasa, E311 - AuM; Gökcen Bas, E311 - AuM
    Other persons involved: Wojciech Zebala; Ildiko Mankova

    L. Kandrac, I. Mankova, M. Vrabel, J. Beno, M.N. Durakbasa, G. Bas:
    "Outline Of Cutting Edge Preparation And Model Proposal For Nanometrological Process Management";
    in: "Scientific Research Reports "Development in Machining Technology"", W. Zebala, I. Mankova (ed.); issued by: Cracow University of Technology; Development in Machining Technology, Krakow, Polen, 2013, ISBN: 978-83-7242-655-0, 62 - 81.

    More information

  38. Authors: L. Kandrac; Ildiko Mankova; M. Vrabel; Jozef Beno; J. Stahovec; M. Numan Durakbasa, E311 - AuM; Gökcen Bas, E311 - AuM

    L. Kandrac, I. Mankova, M. Vrabel, J. Beno, J. Stahovec, M.N. Durakbasa, G. Bas:
    "Application of FEM Analysis to Predict the Effect of Cutting Conditions and Tool Geometry on Temperature and Cutting Forces During Orthogonal Cutting of Ti-6Al-4V";
    in: "Scientific Research Reports "Development in Machining Technology"", issued by: Cracow University of Technology; Development in Machining Technology, 2014, ISBN: 9788372427656, 52 - 74.

    More information

  39. Author: Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Design and Scheduling of Next Generation of Self-organising Assembly Systems";
    in: "DAAAM International Scientific Book 2002", B. Katalinic (ed.); DAAAM International Vienna, Vienna, 2002, ISBN: 3-901509-30-5, 299 - 314.

  40. Author: Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Foreword";
    in: "DAAAM International Scientific Book 2003", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Vienna, 2003, ISBN: 3-901-509-36-4, 3 - 4.

  41. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Foreword";
    in: "DAAAM International Scientific Book 2005", issued by: DAAAM Internaitonal Vienna; DAAAM International Vienna, Vienna, 2005, (invited), ISBN: 3-901509-43-7, 3.

  42. Authors: Branko Katalinic, E311 - IMS; Paulina Cesarec, E311 - IMS; Roman Kettler, E311 - IMS

    B. Katalinic, P. Cesarec, R. Kettler:
    "Integration of Subordination and self Organisation in working Scenarios of Bionic Assembly System";
    in: "Concurrent Product and Technology Development", CEEPUS Network CII-HR-0108, Rijeka, 2009, ISBN: 978-953-968999-3, 305 - 320.

  43. Authors: Branko Katalinic, E311 - IMS; Vedran Kordic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic, V. Kordic:
    "Integration of Subordination and Self Organisation in Working Scenarios of Bionic Assembly System";
    in: "DAAAM International Scientific Book 2003", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2003, (invited), ISBN: 3-901-509-36-4, 319 - 330.

  44. Authors: Branko Katalinic, E311 - IMS; Aleksandar Lazinica, E311 - IMS

    B. Katalinic, A. Lazinica:
    "Autonomous mobile robots in assembly applications";
    in: "DAAAM International Scientific Book 2005", issued by: DAAAM Internaitonal Vienna; DAAAM International Vienna, Vienna, 2005, (invited), ISBN: 3-901509-43-7, 323 - 332.

  45. Authors: Burkhard Kittl, E311 - RIF; Christian Baumann, E311 - RIF

    B. Kittl, C. Baumann:
    "Web based cell control software architecture";
    in: "Computer Integrated Manufacturing - Advanced Design and Management", issued by: Department of Engineering Process Automation and Integrated Manufacturing Systems, Silesian University of Technology; WNT, Warschau, 2003, ISBN: 83-204-2850-5, 265 - 272.

    More information

  46. Authors: Vedran Kordic, E311 - IMS; Branko Katalinic, E311 - IMS; Berislav Ljoljic, E311 - IMS; Kemajl Stuja, E311 - IMS

    V. Kordic, B. Katalinic, B. Ljoljic, K. Stuja:
    "Toward Autonomous Agent Design Concept";
    in: "DAAAM International Scientific Book 2002", issued by: B. Katalinic; DAAAM International Vienna, Vienna, 2002, ISBN: 3-901509-30-5, 315 - 323.

  47. Authors: Zvonko Kremljak; Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    Z Kremljak, B. Katalinic:
    "Preface";
    in: "Decision Making Under Risk", B. Katalinic (ed.); issued by: Wien; DAAAM International Vienna, Wien, 2004, (invited), ISBN: 3-901509-44-5, 4.

  48. Author: Gerhard Liedl, E311 - LLU
    Other person involved: Maximilian Lackner, E166 - 3

    G. Liedl:
    "Laser Micromachining";
    in: "Lasers in Chemistry", M. Lackner (ed.); Wiley-VCH, 2008, ISBN: 978-3-527-31997-8, 923 - 941.

  49. Authors: Berislav Ljoljic, E311 - IMS; Branko Katalinic, E311 - IMS; Vedran Kordic, E311 - IMS; Kemajl Stuja, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Ljoljic, B. Katalinic, V. Kordic, K. Stuja:
    "Strategical Planning for a Manufacturing Company";
    in: "DAAAM International Scientific Book 2002", B. Katalinic (ed.); issued by: B. Katalinic; DAAAM International Vienna, Vienna, 2002, ISBN: 3-901509-30-5, 343 - 349.

  50. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM

    P.H. Osanna, M.N. Durakbasa:
    "Prüfmittelmanagement und Messtechnik";
    in: "Taschenbuch Qualitätsmanagement", Hanser, München Wien, 2004, ISBN: 3-446-22830-6, 200 - 224.

  51. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM
    Other persons involved: Wojciech Zebala; Josef Beno

    P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
    "EVALUATION OF NON-TECHNICAL STRUCTURES ON THE BASIS OF SOPHISTICATED PRODUCTION METROLOGY AND INFORMATION TECHNOLOGY";
    in: "Production Process in Mechanical Engineering", W. Zebala, J. Beno (ed.); issued by: Cracow University of Technology - Technical University of Kosice; Cracow University of Technology - Technical University of Kosice, Slovakia, 2006, ISBN: 80-8073-568-9, 153 - 160.

  52. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
    "Measurement of geometrical properties (chapter 14)";
    in: "Measurement in Technology - Volume II", issued by: Vienna University of Technology; TU Wien, 2005, ISBN: 80-89112-05-6, 404 - 422.

  53. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
    "Nano-Metrologie als wissenschaftliche Disziplin in der praktischen Anwendung und im Blickpunkt der europäischen internationalen Standardisierung";
    in: "Messtechnik für Mikro- und Nano-Engineering", issued by: VDI Wissensforum IWB; VDI Verlag GmbH, Düsseldorf, 2006, ISBN: 3-18-091950-7, 12.

  54. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
    "Nanometrologie - Hochgenaue Messtechnik für Maschinenbau, Präzisionstechnik und Bioengineeing";
    in: "Measuring Technology in Advanced Machine Manufacturing Systems", issued by: Kielce University of Technology; Wydawnictwo, Kielce, Polen, 2004, ISBN: 83-88906-65-8, 11 - 19.

  55. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM
    Other persons involved: Stanislaw Adamczak; Peter Herbert Osanna, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
    "NANOMETROLOGIE - HOCHGENAUE MESSTECHNIK FÜR MASCHINENBAU, PRÄZISIONSTECHNIK UND BIOENGINEERING";
    in: "SCIENCE REPORT Measuring Technology in Advanced Machine Manufacturing Systems", S. Adamczak, P.H. Osanna (ed.); Wydawnictwo, Kielce, PL, 2004, ISBN: 83-88906-65-8, 11 - 20.

  56. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat et al.:
    "Production Metrology for Quality Control in Biomedical Application - Opportunities, Trends and Future Developments";
    in: "Measurement and Quality Control in Production (VDI-Bericht 1680)", issued by: VDI (Verein Deutscher Ingenieure); VDI Verlag GmbH, Düsseldorf, Deutschland, 2004, ISBN: 3-18-091860-8, 291 - 296.

  57. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Jorge Martin Bauer, E311 - AuM; Halima Tahirova, E311 - AuM; Lukas Kräuter
    Other persons involved: Carlos Brebbia; Marcelo Enrique Conti; Enzo Tiezzi

    P.H. Osanna, M.N. Durakbasa, J.M. Bauer, H. Tahirova, L. Kräuter:
    "Intelligent flexible disassembly and recycling of used products to support sustainability and total quality management in modern manufacturing industry";
    in: "Management of Natural Resources, Sustainable Development and Ecological Hazards", C.A. Brebbia, M.E. Conti, E. Tiezzi (ed.); issued by: Wessex Institute of Technology; Wessex Institute of Technology, Southampton, UK, 2007, ISBN: 978-184564-048-4, 209 - 215.

  58. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Jorge Martin Bauer, E311 - AuM; Halima Tahirova, E311 - AuM; Lukas Kräuter, E325 - 6

    P.H. Osanna, M.N. Durakbasa, J.M. Bauer, H. Tahirova, L. Kräuter:
    "Management of Natural Resources, Sustainable Development and Ecological Hazards";
    in: "Management of Natural Resources, Sustainable Development and Ecological Hazards", WIT Press, 2006, ISBN: 978-1-84564-048-4.

  59. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Lukas Kräuter
    Other persons involved: Ildiko Mankova; Woyciech Zebala; Jozef Beno

    P.H. Osanna, M.N. Durakbasa, L. Kräuter:
    "Accurate Workpiece Measurement Technique Develops from Precision Metrology to Nanometrology and Femtometrology";
    in: "Production Process in Mechanical Engineering", I. Mankova, W. Zebala, J. Beno (ed.); issued by: Cracow University of Technology; Cracow University of Technology - Technical University of Kosice, Cracow, 2007, ISBN: 978-83-7242-428-0, 31 - 42.

  60. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Lukas Kräuter
    Other persons involved: Stanislaw Adamczak; Peter Herbert Osanna, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, L. Kräuter:
    "Moderne Metrologie in Qualitätsmanagementsystemen";
    in: "SCIENCE REPORT PROJECT PL-0007 Modern Metrology in Quality Management Systems", S. Adamczak, P.H. Osanna (ed.); issued by: Kielce University of Technology; Science Report, Kielce, 2006, ISBN: 978-83-88906-66-4, 11 - 27.

  61. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Gottfried Slanar, E311 - AuM
    Other persons involved: Stanislaw Adamczak; Peter Herbert Osanna, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, G. Slanar:
    "Entwicklungsstand der Messtechnik am Beginn des 21sten Jahrhunderts";
    in: "Computer-Aided Systems for Manufacture and Measurement of Machine Elements", S. Adamczak, P.H. Osanna (ed.); Wydawnictwo, Kielce, PL, 2003, ISBN: 83-88906-30-5, 11 - 22.

  62. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Gottfried Slanar, E311 - AuM; Lukas Kräuter
    Other persons involved: Stanislaw Adamczak; Peter Herbert Osanna, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, G. Slanar, L. Kräuter:
    "Erhöhung der Qualität und Umwelt-Verträglichkeit von Prozessen und Anlagen in modernen Industrie-Betrieben";
    in: "Science Report", S. Adamczak, P.H. Osanna (ed.); issued by: Kielce University of Technology; Wydawnictwo Politechniki Swietokrzyskiej, Kielce, 2008, ISBN: 978-83-88906-57-2, 21 - 28.

  63. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Mehmet Emin Yurci; Jorge Martin Bauer, E311 - AuM
    Other person involved: Maria Manuela Cruz-Cunha

    P.H. Osanna, M.N. Durakbasa, M.E. Yurci, J.M. Bauer:
    "Enterprise Information Systems for Business Integration in Global International Cooperations of Collaborating Small and Medium Sized Organisations";
    in: "Enterprise Information Systems for Business Integration in SMEs Technological, Organizational and Social Dimensions", M. Cruz-Cunha (ed.); issued by: Business Science Reference; Business Science Reference - IGI Global, Hershey PA - USA, 2009, ISBN: 978-1-60566-892-5, 175 - 186.

  64. Authors: Peter Herbert Osanna, E311 - AuM; Jayaraman Raja; Ali Afjehi-Sadat, E311 - AuM

    P.H. Osanna, J. Raja, A. Afjehi-Sadat:
    "Wirtschaftlichkeitsüberlegungen beim Einsatz von Koordinatenmessgeräten";
    in: "Koordinatenmesstechnik Genauigkeit - Erfahrungen - Innovationen", issued by: VDI/VDE-Gesellschaft; VDI Verlag GmbH, Düsseldorf, 2001, ISBN: 3-18-091618-4, 217 - 228.

  65. Authors: Peter Herbert Osanna, E311 - AuM; Erdal Sarigül; M. Numan Durakbasa, E311 - AuM; A. Osanna
    Other persons involved: R.A. Adey; G. Rzevski; D.W. Russel

    P.H. Osanna, E. Sarigül, M.N. Durakbasa, A. Osanna:
    "The Role of Databanks for Artificial Intelligence Based Measurement and Control in Computer Integrated Production";
    in: "Applications of Artificial Intelligence in Engineering IX", R. Adey, G. Rzevski, D. Russel (ed.); issued by: Wessex Institute of Technology U.K.&G.; WIT Press, Ashurst, Southampton SO40 7AA, UK, 1994, ISSN: 1743-3517, 8 pages.

  66. Authors: Florian Pauker, E311; Thomas Weiler, E311; Iman Ayatollahi, E311 - RIF; Burkhard Kittl, E311 - RIF

    F. Pauker, T. Weiler, I. Ayatollahi, B. Kittl:
    "Information Architecture for reconfigurable production systems";
    in: "DAAAM International Scientific Book 2013", DAAAM International Vienna, Wien, 2013, ISBN: 978-3-901509-94-0, 873 - 886.

  67. Authors: Markus Stopper, E311-IMS; Branko Katalinic, E311 - IMS; Kemajl Stuja, E311 - IMS

    M. Stopper, B. Katalinic, K. Stuja:
    "The advanced concept for planning of flexible manufacturing system for motor gears";
    in: "DAAAM International Scientific Book 2005", issued by: DAAAM International Vienna; DAAAM International Vienna, Vienna, 2005, (invited), ISBN: 3-901509-43-7, 627 - 636.

  68. Authors: Kemajl Stuja, E311 - IMS; Branko Katalinic, E311 - IMS; Berislav Ljoljic, E311 - IMS; Vedran Kordic, E311 - IMS

    K. Stuja, B. Katalinic, B. Ljoljic, V. Kordic:
    "Scheduling of Flexible Manufacturing Systems for Rotational Parts in a Case of Limited Production Means";
    in: "DAAAM International Scientific Book 2002", issued by: B. Katalinic; DAAAM International, Vienna, 2002, ISBN: 3-901509-30-5, 555 - 564.

  69. Authors: Kemajl Stuja, E311 - IMS; Markus Stopper, E311-IMS; Avdyl Bunjaku; Mirilind Bruqi
    Other person involved: Branko Katalinic, E311 - IMS

    K. Stuja, M. Stopper, A. Bunjaku, M. Bruqi:
    "A Concept of Scheduling of Flexible Assembly System for Electrical Motors";
    in: "DAAAM International Scientific Book 2003", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Vienna, 2003, ISBN: 3-901-509-36-4, 591 - 598.

  70. Authors: Richard Zemann, E311 - FET; Fritz Bleicher, E311 - FET; Reinhard Zisser-Pfeifer, E311 - FET

    R. Zemann, F. Bleicher, R. Zisser-Pfeifer:
    "Electrochemical Micromachining with ultra short voltage pulses";
    in: "The Archive of Mechanical Engineering", PAN Polish Academy of Sciences - Committee of Machine Design, Warschau, 2012, ISSN: 0004-0738, 314 - 327.

  71. Authors: Richard Zemann, E311 - FET; Philipp Walter Reiss; Paul Schörghofer; Fritz Bleicher, E311 - FET

    R. Zemann, P. Reiss, P. Schörghofer, F. Bleicher:
    "Some Contributions at the Technology of Electrochemical Micromachining with Ultra Short Voltage Pulses";
    in: "Cutting Edge Research in New Technologies", issued by: Constantin Volosencu; InTech, Janeza Trdine 9 , 5100 Rijeka, Croatia, 2012, ISBN: 978-953-51-0463-6, 3 - 28.


Contributions to Proceedings


  1. Authors: Bernhard Angerer; Branko Katalinic, E311 - IMS; Andrea Omicini
    Other person involved: Branko Katalinic, E311 - IMS

    B. Angerer, B. Katalinic, A. Omicini:
    "A Semantic Escience Portal for International Scientific and Academic Cooperation";
    in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-70-4, 1727 - 1728.

  2. Authors: Iman Ayatollahi, E311 - RIF; Burkhard Kittl, E311 - RIF; Florian Pauker, E311; Martin Hackhofer

    I. Ayatollahi, B. Kittl, F. Pauker, M. Hackhofer:
    "Prototype OPC UA Server for Remote Control of Machine Tools";
    in: "IN-TECH 2013 Proceedings of International Conference on Innovative Technologies", Faculty of Engineering University of Rijeka, 2013, ISBN: 978-953-6326-88-4, 73 - 76.

  3. Authors: Farsad Badjgholi, E311 - RIF; Burkhard Kittl, E311 - RIF

    F. Badjgholi, B. Kittl:
    "Automated Tool Selection for Machining";
    in: "Proceedings of 12th International DAAAM Symposium", DAAAM International Vienna, 2001, ISBN: 3-901509-19-4, 11 - 12.

    More information

  4. Authors: Ferdinand Bammer, E311 - LLU; Jaka Petelin, Univ. Ljubljana; Rok Petkovsek, University Ljubljana

    F. Bammer, J. Petelin, R. Petkovsek:
    "Measurements on a Single Crystal Photo-Elastic Modulator";
    in: "CLEO:2011", OSA The Optical Society, 2011, ISBN: 978-1-55752-910-7, Paper ID JTuI80, 2 pages.

    More information

  5. Authors: Ferdinand Bammer, E311 - LLU; Rok Petkovsek, University Ljubljana

    F. Bammer, R. Petkovsek:
    "SCPEM-based polarization modulation ellipsometry in the NIR";
    in: "Optical Fabrication, Testing, and Metrology IV", SPIE, 2011, ISBN: 9780819487957, 81690O-1 - 81690O-6.

    More information

  6. Authors: Ferdinand Bammer, E311 - LLU; Thomas Schumi, E311 - LLU; Andreas Otto, E311 - LLU; Dieter Schuöcker, E311 - LLU

    F. Bammer, T. Schumi, A. Otto, D. Schuöcker:
    "Laser Assisted Bending For Efficient Light-Weight-Production";
    in: "MOTSP 2011", University of Zagreb, 2011, ISBN: 978-953-7738-10-5, 375 - 380.

    More information

  7. Authors: Ferdinand Bammer, E311 - LLU; Thomas Schumi, E311 - LLU; Rok Petkovsek, University Ljubljana

    F. Bammer, T. Schumi, R. Petkovsek:
    "A new material for Single Crystal Modulators: BBO";
    in: "Diode-Pumped High Energy and High Power Lasers", SPIE, 2011, ISBN: 9780819486707, 80800H-1 - 80800H-6.

    More information

  8. Authors: Ferdinand Bammer, E311 - LLU; Thomas Schumi, E311 - LLU; Dieter Schuöcker, E311 - LLU

    F. Bammer, T. Schumi, D. Schuöcker:
    "Some Aspects of Laser-Assisted Bending";
    in: "ICTP 2011", IBF (RWTH Aachen) & IUL (TU Dortmund), 2011, ISBN: 978-3-514-00784-0, 348 - 351.

    More information

  9. Authors: Christian Baumann, E311 - RIF; Burkhard Kittl, E311 - RIF

    C. Baumann, B. Kittl:
    "Cell Control Software and Web Services";
    in: "Proceedings of the 13th International DAAAM Symposium "INTELLIGENT MANUFACTURING & AUTOMATION: LEARNING FROM NATURE"", DAAAM International Vienna, 2002, ISBN: 3-901509-29-1, 27 - 28.

    More information

  10. Author: Dominik Berger, E311 - FET
    Other person involved: Branko Katalinic, E311 - IMS

    D. Berger:
    "Development of a Discrete Simulation Model for a Light Rail Vehicle Assembly Line";
    in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2011, ISBN: 978-3-901509-83-4, 1423 - 1424.

  11. Authors: Dominik Berger, E311 - FET; Roland Fürbacher, E311 - FET
    Other person involved: Branko Katalinic, E311 - IMS

    D. Berger, R. Fürbacher:
    "Development of Measurement Technique for Cutting Edge Defects in Fiber Reinforced Plastics";
    in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2011, ISBN: 978-3-901509-83-4, 1421 - 1422.

  12. Authors: Johannes Bernreiter, E311 - FET; Fritz Bleicher, E311 - FET
    Other person involved: Branko Katalinic, E311 - IMS

    J. Bernreiter, F. Bleicher:
    "Hybrid Machining of SiC";
    in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2010, ISBN: 978-3-901509-73-5.

  13. Authors: Robert Bielak, E311 - LLU; Gerhard Liedl, E311 - LLU

    R. Bielak, G. Liedl:
    "FEM analysis of debonding problems during bi-metal wire joining of aluminum and steel sheets";
    in: "Internetový časopis MATERIALS SCIENCE AND TECHNOLOGY", issued by: Faculty of Materials Science and Technolgy; Materials Science and Technology, Trnava, 2011, ISSN: 1335-9053, 83 - 88.

    More information

  14. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Optimizing a Three-Axes Machine-Tool with Parallel Kinematic Structure";
    in: "Parallel Kinematics Seminar Chemnitz: Development Methods and Application Experience of Parallel Kinematics", Verlag Wissenschaftliche Scripten Zwickau, Zwickau, 2002, ISBN: 3-928921-76-2, 883 - 890.

  15. Authors: Fritz Bleicher, E311 - FET; Johannes Bernreiter, E311 - FET
    Other person involved: Branko Katalinic, E311 - IMS

    F. Bleicher, J. Bernreiter:
    "Mechatronic system for the hybrid machining of brittle hard materials";
    in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-70-4, 1831 - 1832.

    More information

  16. Authors: Fritz Bleicher, E311 - FET; Johannes Bernreiter, E311 - FET; Christoph Lechner
    Other person involved: Branko Katalinic, E311 - IMS

    F. Bleicher, J. Bernreiter, C. Lechner:
    "3D Laser Removal - Optimization for Improving Form Errors";
    in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2010, ISBN: 978-3-901509-73-5, 845 - 846.

  17. Authors: Fritz Bleicher, E311 - FET; Christoph Einspieler, E311; Johannes Bernreiter, E311 - FET; Boris Huber, E222 - 1; Norbert Krouzecky, E222 - 1

    F. Bleicher, C. Einspieler, J. Bernreiter, B. Huber, N. Krouzecky:
    "Development of a measuring system for the analysis of hydraulic models of the size of 50x16 m by the use of numerical control technology";
    in: "Proceedings 25th Danubia-Adria Symposium on Advances in Experimental Mechanics", DAS, 2008, (invited).

  18. Authors: Fritz Bleicher, E311 - FET; Boris Huber, E222 - 1; Karl Fuchs, E222 - 1; Christoph Einspieler, E311 - FET; Johannes Bernreiter, E311 - FET; Norbert Krouzecky, E222 - 1

    F. Bleicher, B. Huber, K. Fuchs, C. Einspieler, J. Bernreiter, N. Krouzecky et al.:
    "Comparison of different measuring methods for positioning of a recording device in large models";
    in: "Proceedings 26th Danubia-Adria Symposium on Advances in Experimental Mechanics", Institut für Mechanik, Montanuniversität Leoben, Leoben, Österreich, 2009, (invited).

  19. Authors: Fritz Bleicher, E311 - FET; Falko Puschitz, E311 - FET
    Other person involved: Branko Katalinic, E311 - IMS

    F. Bleicher, F. Puschitz:
    "Automatically operating calibration method for a three-axis parallel kinematic machine";
    in: "15th DAAAM International Symposium: "Intelligent Manufacturing & Automation: Globalisation - Technology - Men - Nature", B. Katalinic (ed.); issued by: DAAAM International; DAAAM International, 2004, ISBN: 3-901509-42-9, 43 - 44.

    More information

  20. Authors: Fritz Bleicher, E311 - FET; Falko Puschitz, E311 - FET; Thomas Palatin, E311
    Other person involved: Branko Katalinic, E311 - IMS

    F. Bleicher, F. Puschitz, T. Palatin:
    "High Performance Manufacturing (HPM) a System Adapting Cutting Process";
    in: "DAAAM International Scientific Book 2007", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2007, ISBN: 3-901509-60-7.

    More information

  21. Authors: Fritz Bleicher, E311 - FET; Falko Puschitz, E311 - FET; Adolf Theiner, E311 - FET
    Other person involved: Branko Katalinic, E311 - IMS

    F. Bleicher, F. Puschitz, A. Theiner:
    "LASER BASED MEASURMENT SYSTEM FOR CALIBRATING MACHINE TOOLS IN 6 DOF";
    in: "DAAAM International Scientific Book 2006", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2006, ISBN: 3-901509-47-x.

    More information

  22. Authors: Fritz Bleicher, E311 - FET; Reinhard Zisser-Pfeifer, E311 - FET; Richard Zemann, E311 - FET
    Other person involved: Branko Katalinic, E311 - IMS

    F. Bleicher, R. Zisser-Pfeifer, R. Zemann:
    "Electrochemical Milling";
    in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2010, ISBN: 978-3-901509-73-5, 843 - 844.

  23. Authors: Iva-Nicol Bogovic; Branimir Barisic; Branko Katalinic, E311 - IMS; Marko Krsulja; Zlatan Car
    Other person involved: Branko Katalinic, E311 - IMS

    I. Bogovic, B. Barisic, B. Katalinic, M. Krsulja, Z. Car:
    "Digitizing System Atos - Measuring Turbo Compressor Housing";
    in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2011, ISBN: 978-3-901509-83-4, 1367 - 1368.

  24. Authors: Veselka Despot; Branimir Barisic; Branko Katalinic, E311 - IMS; Marko Krsulja; Zlatan Car
    Other person involved: Branko Katalinic, E311 - IMS

    V. Despot, B. Barisic, B. Katalinic, M. Krsulja, Z. Car:
    "Radioscopic Measurement on Fuel Filter Support: Inspection for Health of Material";
    in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2011, ISBN: 978-3-901509-83-4, 1359 - 1360.

  25. Authors: Alexandros-Athanassi Dimitriou, E311; Christoph Dorn, E311 - FET; Fritz Bleicher, E311 - FET
    Other person involved: Branko Katalinic, E311 - IMS

    A. Dimitriou, C. Dorn, F. Bleicher:
    "A Holistic Approach for Energy Efficient Production Facilities";
    in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2011, ISBN: 978-3-901509-83-4, 1437 - 1438.

  26. Author: M. Numan Durakbasa, E311 - AuM
    Other persons involved: Edmond Hajrizi; Peter Herbert Osanna, E311 - AuM

    M.N. Durakbasa:
    "Accreditation and certification in Europe and Worldwide";
    in: "1st EUROPEAN QUALITY DAYS IN KOSOVA", E. Hajrizi, P.H. Osanna (ed.); issued by: Institute for Enterprise Management and Engineering / Vienna University of Twechnology; Proceedings of the International IEME-Conference, Prishtina, Kosova, 2002, ISBN: 3-901888-20-9, 63 - 69.

  27. Author: M. Numan Durakbasa, E311 - AuM

    M.N. Durakbasa:
    "Artificial Intelligence Based Measurement System Supervision";
    in: "Intelligent Systems", issued by: IEEE; IEEE, Sofia, 2002, ISBN: 0-7803-7601-3, 298 - 301.

  28. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM

    M.N. Durakbasa, P.H. Osanna:
    "Development and State of the Art of Production Metrology for the 21st Century - From Micrometrology to Nanometrology and Picometrology";
    in: "Modern Technologies in Manufacturing", issued by: MTeM, Cluj-Napoca; Proceedings of the 6th International Conference MTeM, Cluj-Napoca, 2003, (invited), ISBN: 973-656-490-8, 464 - 474.

  29. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM

    M.N. Durakbasa, P.H. Osanna:
    "Surface Measurement and Evaluation of Non Technical Structures by Co-ordinate Metrology";
    in: "HMD 18th Metrology Symposium", issued by: Croatian Metrology Society; Symposium Digest, Zagreb, HR, 2001, ISBN: 953---96093-5-6, 4 pages.

  30. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM

    M.N. Durakbasa, P.H. Osanna:
    "The Role of Co-ordinate Metrology in the Hierarchical Structure of Metrology and the System for Measurement Instruments Confirmation";
    in: "COORDINATE MEASURING TECHNIQUE", issued by: Vth International Scientific Conference; Tagung, Bielsko-Biala, 2002, 55 - 62.

  31. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Lukas Kräuter
    Other persons involved: Imre Horvath; Zoltan Rusak

    M.N. Durakbasa, P.H. Osanna, L. Kräuter:
    "The Fundamental Influence of Education, Training and Certification of Persons Working in Metrology for Research and in Industry";
    in: "Proceedings of the 7th International Symposium on Tools and Methods of Competitive Engineering", I. Horvath, Z. Rusak (ed.); issued by: Delft University of Technology; Faculty of Industrial Design Engineering, Delft University of Technology, Eurotech 2 d.o.o., Delft, Netherlands, 2008, ISBN: 978-90-5155-044-3, 1409 - 1410.

  32. Authors: Bernd Gastermann; Franz Luftensteiner; Markus Stopper, E311-IMS; Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Gastermann, F. Luftensteiner, M. Stopper, B. Katalinic:
    "Multiple Stage Production Planning in Plain Manufacturing Environments";
    in: "Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium: "Make Harmony between Technology and Nature, and Your Mind will Fly Free as a Bird"", B. Katalinic (ed.); issued by: DAAAM Vienna International; DAAAM International Vienna, Wien, 2012, ISBN: 978-3-901509-91-9, Paper ID Volume 23, No.1 CDRom Version, 4 pages.

  33. Authors: Bernd Gastermann; Markus Stopper, E311-IMS; Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Gastermann, M. Stopper, B. Katalinic:
    "Apects of the Production Control System Conwip in Small and Medium Sized Industrial Companies";
    in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2011, ISBN: 978-3-901509-83-4, 0621 - 0622.

  34. Authors: Bernd Gastermann; Markus Stopper, E311-IMS; Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Gastermann, M. Stopper, B. Katalinic:
    "Outline of an Autonomous Control Concept for Continuous Flow Production Using RFID and Agend-based Services";
    in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2010, ISBN: 978-3-901509-73-5, 863 - 864.

  35. Authors: Ioanna Giouroudi, E366 - MST; Jürgen Kosel, E354; Daniela Andrijasevic, E366 - MST; Harald Hötzendorfer, E101 - 6; Helmut Pfützner, E354; Werner Brenner, E366 - MST; Fritz Bleicher, E311 - FET

    I. Giouroudi, J. Kosel, D. Andrijasevic, H. Hötzendorfer, H. Pfützner, W. Brenner, F. Bleicher:
    "Magnetostrictive Bilayer Sensor for Micro Torque Measurements";
    in: "European Magnetic Sensors & Actuators Conference", issued by: Book of Abstracts EMSA 2006; Book of Abstracts EMSA 2006, Bilbao, University of Basque Country, 2006, 153 - 161.

  36. Authors: Christoph Habersohn, E311 - FET; Falko Puschitz, E311 - FET; Fritz Bleicher, E311 - FET
    Other person involved: Lajos Borbas

    Ch. Habersohn, F. Puschitz, F. Bleicher:
    "Controller concept for a highly parallel machine tool";
    in: "28th Danubia-Adria-Symposium", L. Borbas (ed.); issued by: Scientific Society for Mechanical Engineering; Scientific Society for Mechanical Engineering, Siofok, 2011, (invited), ISBN: 978-963-9058-32-3, 227 - 228.

  37. Authors: Marko Hodak; Branimir Barisic; Branko Katalinic, E311 - IMS; Marko Krsulja; Zlatan Car
    Other person involved: Branko Katalinic, E311 - IMS

    M. Hodak, B. Barisic, B. Katalinic, M. Krsulja, Z. Car:
    "Flatness of mechanical Interface of housing filter: Comparing Methods";
    in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2011, ISBN: 978-3-901509-83-4, 1381 - 1382.

  38. Authors: Adriana Hornikova, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Fritz Bleicher, E311 - FET

    A. Hornikova, M.N. Durakbasa, F. Bleicher:
    "Re-Calibration Evaluation Utilizing Data Mining Methods";
    in: "ISMQC", Osaka University, Osaka, 2010, ##.

  39. Authors: Wladyslaw Jakubiec; Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Wojciech Plowucha

    W. Jakubiec, P.H. Osanna, M.N. Durakbasa, W. Plowucha:
    "Educational Objectives of Europeean Course of Coordinate Metrology for Employees of the Machine Industry";
    in: "Metrology in Production Engineering", issued by: Politechnika Lubelska; XI Krajowa, II Miedzynarodowa Konferencja Naukowo-Techniczna "METROLOGY IN PRODUCTION ENGINEERING", Lublin, 2005, ISBN: 83-89246-19-8, 101.

  40. Authors: Marin Jurjevic; Branimir Barisic; Branko Katalinic, E311 - IMS; Marko Krsulja; Zlatan Car
    Other person involved: Branko Katalinic, E311 - IMS

    M. Jurjevic, B. Barisic, B. Katalinic, M. Krsulja, Z. Car:
    "Suitable Devices for Measuring Roughness on Oil Filter Housing";
    in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2011, ISBN: 978-3-901509-83-4, 1351 - 1352.

  41. Authors: Marin Jurjevic; Marko Krsulja; Branko Katalinic, E311 - IMS; Zlatan Car, 311-IMS; Leon Sikulec
    Other person involved: Branko Katalinic, E311 - IMS

    M. Jurjevic, M. Krsulja, B. Katalinic, Z. Car, L. Sikulec:
    "Automatic Measurement of Rotational Speed and Lathe Maintenance";
    in: "Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium: "Make Harmony between Technology and Nature, and Your Mind will Fly Free as a Bird"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2012, ISBN: 978-3-901509-91-9, Paper ID Volume 23, No.1 CDRom Version, 4 pages.

  42. Author: Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "DAAAM International Network: Background, History, Aims, Structure, Activities & Future";
    in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-70-4, 14 - 48.

  43. Author: Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Engineers for knowledge based Society";
    in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2010, ISBN: 978-3-901509-73-5, 1 - 2.

  44. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Preface";
    in: "Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries", issued by: Josip Juraj Sotrssmayer University of Osijek; DAAAM International Vienna, Slavonski Brod, 2005, (invited), ISBN: 953-6048-29-9, 1.

  45. Author: Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "The 20th DAAAM World Symposium";
    in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-70-4, 3 - 4.

  46. Author: Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "The 21st DAAAM World Symposium";
    in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2010, ISBN: 978-3-901509-73-5, 3 - 4.

  47. Author: Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Welcome to 22nd DAAAM World Symposium";
    in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"", B. Katalinic (ed.); DAAAM International Vienna, Wien, 2011, (invited), ISBN: 978-3-901509-83-4, 3 - 4.

  48. Authors: Branko Katalinic, E311 - IMS; Bernhard Angerer
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic, B. Angerer:
    ""Automation transition concerning the virtual organization"";
    in: "Annals of DAAAM for 2004 & Proceedings of 15th International DAAAM Symposium", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2004, (invited), ISBN: 3-901509-42-9, 013 - 014.

  49. Authors: Branko Katalinic, E311 - IMS; Paulina Cesarec, E311 - IMS; Markus Stopper, E311-IMS; Roman Kettler, E311 - IMS
    Other person involved: Rein Kyttner

    B. Katalinic, P. Cesarec, M. Stopper, R. Kettler:
    "Self-Organizing Systems in Nature and Technology";
    in: "Proceedings of the 7th International Conferencf DAAAM Baltic Indsutrial Engineering", R Kyttner (ed.); issued by: DAAAM International Vienna & BALTECH Consortium; DAAAM International Vienna, Wien, 2010, (invited), 346 - 351.

  50. Authors: Branko Katalinic, E311 - IMS; Aaa Jadlovska; Kkk Hrubina; Emil Wessely
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic, A. Jadlovska, K. Hrubina, E. Wessely:
    "Optimal control of complex processes";
    in: "Annals of DAAAM for 2004 & Proceedings of 15th International DAAAM Symposium", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2004, (invited), ISBN: 3-901509-42-9, 177 - 178.

  51. Authors: Branko Katalinic, E311 - IMS; Aaa Javorova
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic, A. Javorova:
    "Flexible assembly workstation";
    in: "Annals of DAAAM for 2004 & Proceedings of 15th International DAAAM Symposium", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2004, (invited), ISBN: 3-901509-42-9, 191 - 192.

  52. Authors: Branko Katalinic, E311 - IMS; Vedran Kordic, E311 - IMS
    Other persons involved: Vlado Majstorovic; Branko Katalinic, E311 - IMS; Dragan Covic; Vojo Visekruna

    B. Katalinic, V. Kordic:
    "Reconfigurable Assembly Systems Based on Reactive Autonomous Robots";
    in: "Proceedings of the 3rd International Conference UPS 2004 Business Systems Management", V. Majstorovic, B. Katalinic, D. Covic, V. Visekruna (ed.); issued by: Mostar; DAAAM International Vienna & Universtiy of Mostar, Vienna - Mostar, 2004, (invited), ISBN: 3-901509-24-0, 99 - 104.

  53. Authors: Branko Katalinic, E311 - IMS; Vedran Kordic, E311 - IMS
    Other persons involved: Branko Katalinic, E311 - IMS; Iviza VEza; Bozenko Bilic

    B. Katalinic, V. Kordic:
    "Self-Organizing Assembly System";
    in: "Proceedings of the 3rd DAAAM International Conference on Advanced Technologies for Developing Countries", B. Katalinic, I. VEza, B. Bilic (ed.); issued by: Split; DAAAM International Vienna & University of Split, Vienna - Split, 2004, (invited), ISBN: 953-6114-68-2, 137 - 145.

  54. Authors: Branko Katalinic, E311 - IMS; Niko Majdandzic
    Other persons involved: Branko Katalinic, E311 - IMS; Milan Kljajin

    B. Katalinic, N. Majdandzic:
    "Preface";
    in: "Proceedings of the 1st DAAAM International Conference: Advanced Technologies for the Developing Countries - ATDC 02", B. Katalinic, M. Kljajin (ed.); DAAAM International Vienna & Strossmayer University of Osijek - Faculty of Mechanical Engineering, Slavonski Brod, 2002, (invited), ISBN: 3-901509-32-1, 3.

  55. Authors: Branko Katalinic, E311 - IMS; Jyri Papstel
    Other persons involved: Jyri Papstel; Branko Katalinic, E311 - IMS

    B. Katalinic, J. Papstel:
    "Preface";
    in: "Proceedings of the 3rd International Conference of DAAAM National Estonia "Industrial Engineering - New Challenges to SME", J. Papstel, B. Katalinic (ed.); DAAAM National Estonia & Tallinn Technical University, 2002, ISBN: 9985-59-272-7, 4.

  56. Authors: Branko Katalinic, E311 - IMS; Peter Post, E311-IMS; Alexey Eliseev, E311-IMS; Kanji Ueda, E311-IMS; Soemon Takakuwa, E311-IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic, P. Post, A. Eliseev, K. Ueda, S. Takakuwa:
    "Contents";
    in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-70-4, 49 - 77.

  57. Authors: Branko Katalinic, E311 - IMS; Dzemo Tufekcic
    Other persons involved: Branko Katalinic, E311 - IMS; Dzemo Tufekcic; Ramiz Selo

    B. Katalinic, D. Tufekcic:
    "Preface";
    in: "Proceedings of the 2nd DAAAM International Conference on Advanced Technologies for Developing Countries", B. Katalinic, D. Tufekcic, R. Selo (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna & University of Tuzla, Vienna - Tuzla, 2003, ISBN: 3-901-509-35-6, 3 - 4.

  58. Authors: A. Kedir Biadgligne; Kurt Matyas, E330 - 2(BT); Konrad Pfadenhauer, E311 - RIF
    Other person involved: Branko Katalinic, E311 - IMS

    A. Kedir Biadgligne, K. Matyas, K. Pfadenhauer:
    "INTEGRATED MRP HEURISTICS FOR DETERMINING RAW MATERIAL PURCHASING LOT IN MANUFACTURING ENTERPRISES";
    in: "Annals of DAAM for 2004 & Proceedings", B. Katalinic (ed.); issued by: DAAM International Vienna; Danube Adria Association for Automation and Manufacturing, Wien, 2004, ISBN: 3-901509-42-9, 205 - 206.

  59. Authors: Roman Kettler, E311 - IMS; Paulina Cesarec, E311 - IMS; Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    R. Kettler, P. Cesarec, B. Katalinic:
    "Cleaning of Metal Wires by using Rotating Thermal Plasma";
    in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-70-4, 0025 - 0026.

  60. Authors: Burkhard Kittl, E311 - RIF; Christian Baumann, E311 - RIF

    B. Kittl, C. Baumann:
    "Job Shop Communication Based on Simple Object Access Protocol (SOAP)";
    in: "Proceedings of 6th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2000", Faculty of Mechanical Engineering Zenica, 2002, ISBN: 9958-617-11-0, 635 - 638.

    More information

  61. Authors: Burkhard Kittl, E311 - RIF; Christian Baumann, E311 - RIF

    B. Kittl, C. Baumann:
    "XML Based Manufacturing Data Exchange";
    in: "Proceedings oft 12th International DAAAM Symposium", DAAAM International Vienna, 2001, ISBN: 3-901509-19-4, 225 - 226.

    More information

  62. Authors: Burkhard Kittl, E311 - RIF; Thomas Weiler, E311; Konrad Pfadenhauer, E311 - RIF
    Other person involved: Branko Katalinic, E311 - IMS

    B. Kittl, T. Weiler, K. Pfadenhauer:
    "Plant Connectivity: Integration of Machine Tool Control with Manufacturing Operations Management";
    in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna; DAAAM International, Wien, 2010, ISBN: 978-3-901509-73-5, 405 - 406.

  63. Authors: Titanilla Vanessa Komenda; Xiaolong Feng; Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    T. Komenda, X. Feng, B. Katalinic:
    "Optimum Drive-Train Design of an Industrial Robot Family";
    in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-70-4, 1435 - 1436.

  64. Authors: Peter Kopacek, E325 - 6; Teresa Magyar, E311; Lukas Silberbauer, E325 - 6

    P. Kopacek, T. Magyar, L. Silberbauer:
    "Humi - A mobile robot for Landmine Detection";
    in: "10th IFAC Symposium on Robot Control", issued by: IFAC; Elsevier Science Publishers B.V., 2012, 828 - 833.

    More information

  65. Authors: Ilya Konstantinovich Kukushkin; Branko Katalinic, E311 - IMS; Paulina Cesarec, E311 - IMS; Roman Kettler, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    I. Kukushkin, B. Katalinic, P. Cesarec, R. Kettler:
    "Reconfiguration in Self-Organizing Systems";
    in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2011, ISBN: 978-3-901509-83-4, 0641 - 0642.

  66. Authors: Ilya Konstantinovich Kukushkin; Branko Katalinic, E311 - IMS; Paulina Cesarec, E311 - IMS; Dariusz Zdyb; Roman Kettler, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    I. Kukushkin, B. Katalinic, P. Cesarec, D. Zdyb, R. Kettler:
    "Modeling of Mobile Robot Behavior for Line-Less Bionic Assembly System";
    in: "Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium: "Make Harmony between Technology and Nature, and Your Mind will Fly Free as a Bird"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2012, ISBN: 978-3-901509-91-9, Paper ID Volume 23, No.1 CDRom Version, 6 pages.

  67. Authors: Maximilian Lackner, E166 - 3; Michael Schwarzott; Gerhard Liedl, E311 - LLU

    M. Lackner, M. Schwarzott, G. Liedl et al.:
    "Heat transfer to a single plastic resin particle - Experimental investigations by flames and laer pulses";
    in: "3rd European Combustion Meeting ECM 2007", issued by: MediterraneanAgronomic Institute of Chania, Greece; European Combustion Meeting 2007, Chania, Greece, 2007, Paper ID 16-12, 6 pages.

    More information

  68. Authors: Bert Lauwers; Fritz Bleicher, E311 - FET; Peter Ten Haaf; Mieke Vanparys; Johannes Bernreiter, E311 - FET; Tom Jacobs; Jeff Loenders

    B. Lauwers, F. Bleicher, P. Ten Haaf, M. Vanparys, J. Bernreiter, T. Jacobs, J. Loenders:
    "Investigation of the Process-Material Interaction in Ultrasonic Assisted Grinding of ZrO2 based Ceramic Materials";
    in: "4th CIRP International Conference on High Performance Cutting 2010", issued by: Pisa; CIRP, 2010, 50 - 51.

    More information

  69. Authors: Jakob Lewandowski, E311 - RIF; Burkhard Kittl, E311 - RIF
    Other person involved: Branko Katalinic, E311 - IMS

    J. Lewandowski, B. Kittl:
    "IT Applications for Manufacturing Operations and Control";
    in: "Annals of DAAAM for 2008 & Proceedings of the 19th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions"", B. Katalinic (ed.); DAAAM International Vienna, 2008, ISBN: 978-3-901509-68-1, 751 - 752.

  70. Authors: Vlado Majstorovic; Branko Katalinic, E311 - IMS
    Other persons involved: Vlado Majstorovic; Branko Katalinic, E311 - IMS; Vojo Visekruna; Dragan Covic

    V. Majstorovic, B. Katalinic:
    "Foreward";
    in: "Proceedings of the 3rd International Conference UPS 2004 Business Systems Management", V. Majstorovic, B. Katalinic, V. Visekruna, D. Covic (ed.); issued by: Mostar; DAAAM International Vienna & Universtiy of Mostar, Vienna - Mostar, 2004, (invited), ISBN: 3-901509-24-0, 3.

  71. Authors: Tyler Nichol, E311 - FET; Falko Puschitz, E311 - FET; Fritz Bleicher, E311 - FET
    Other person involved: Branko Katalinic, E311 - IMS

    T. Nichol, F. Puschitz, F. Bleicher:
    "Piezoelectic Controlled Sub-Micrometer Machining Station";
    in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-70-4, 1769 - 1770.

    More information

  72. Authors: Horst Orsolits; Daniel Sirkett; Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    H. Orsolits, D. Sirkett, B. Katalinic:
    "New Magnetic Gearbox Concept: Prototype Design and Construction";
    in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-70-4, 0457 - 0458.

  73. Author: Peter Herbert Osanna, E311 - AuM
    Other persons involved: Edmond Hajrizi; Peter Herbert Osanna, E311 - AuM

    P.H. Osanna:
    "Environmental Management Systems as Important Factor in European Developments";
    in: "1st EUROPEAN QUALITY DAYS IN KOSOVA", E. Hajrizi, P.H. Osanna (ed.); issued by: Institute for Enterprise Management and Engineering (IEME) / Vienna University of Technology; Proceedings of the International IEME-Conference, 2002, ISBN: 3-901888-20-9, 97 - 100.

  74. Author: Peter Herbert Osanna, E311 - AuM
    Other persons involved: Edmond Hajrizi; Peter Herbert Osanna, E311 - AuM

    P.H. Osanna:
    "The "Quality Road" to Build-Up Social, Economic and Scientific Bridges within Europe";
    in: "1st EUROPEAN QUALITY DAYS IN KOSOVA", E. Hajrizi, P.H. Osanna (ed.); issued by: Institute for Enterprise Management and Engineering (IEME) / Vienna University of Technology; Proceedings of the International IEME-Conference, Prishtina, Kososva, 2002, ISBN: 3-901888-20-9, 18 - 21.

  75. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM

    P.H. Osanna, M.N. Durakbasa:
    "Evaluation and Virtual Realisation of Non-technical Structures using by Co-ordinate Metrology";
    in: "COORDINATE MEASURING TECHNIQUE", issued by: VIth International Scientific Conference; Tagungsband, Bielsko-Biala, 2004, 203 - 212.

  76. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM

    P.H. Osanna, M.N. Durakbasa:
    "Fertigungsmesstechnik aus Sicht der ISO Normen";
    in: "Messtechnik für die Qualitätskontrolle", issued by: Tschechisch-Metrologische Gesellschaft; Tagungsband, Plzen, 2003, 158 - 168.

  77. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
    "Measurement Evaluation of Non-Technical Structures Based on Sophisticated Metrology and Modern Information Technology";
    in: "Metrology and Properties of Enginieering Surfaces", issued by: Ecole Nationale d'Ingénieurs de Saint-Etienne; Publications de I'Universite de Saint-Etienne, Saint-Etienne, France, 2005, ISBN: 2-86272-389-4, 183 - 190.

  78. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
    "Metrology in Micro- and Nanotechnology";
    in: "Proceedings Kongres Metrologii, KM 2004 ", issued by: Politechnika Wroclawska, Wroclaw, PL; Politechnika Wroclawska, Wroclaw, PL, 2004, ISBN: 83-921260-0-9, 9 pages.

  79. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
    "Structure Measurement of Workpiece Surfaces at High Precision Machining";
    in: "2nd International Congres of Precision Machining", issued by: Department of Manufacturing Technology; CVUT, Prag, 2003, ISBN: 80-01-02795-3, 50 - 59.

  80. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
    "The Application of Sophisticated Production Metrology and Nanometrology to Achieve Efficient Quality Control in Bio-Engineering and Bio-Medicine";
    in: "Intelligent Processing and Manufacturing of Materials", issued by: J.A. Meech (Canada), J.F. Maguire (USA), Y. Kawazoe (JApan); IPMM 2005, Monterey, USA, 2005, 6 pages.

  81. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Gebremeskel Kahsay; Ali Afjehi-Sadat, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, G. Kahsay, A. Afjehi-Sadat:
    "Quality Management Practices and Challenges of Manufacturing Industries of Least Developing Countries";
    in: "ICPM 2005 Proceedings", issued by: TU Wien; Abteilung für Austauschbau und Messtechnik, TU Wien, Wien, 2005, ISBN: 3-901-888-31-4, 251 - 256.

  82. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Anil Nomak Akdogan; Halima Tahirova, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, N. Nomak Akdogan, H. Tahirova:
    "Artificial Intelligence Based Supervision and Confirmation of Complex Measurement Systems and Interaction to the Hierarchical Metrological Structure";
    in: "Metrology in Production Engineering", issued by: Politechnika Lubelska; XI Krajowa, II Miedzynarodowa Konferencja Naukowo-Techniczna "METROLOGY IN PRODUCTION ENGINEERING", Lublin, 2005, ISBN: 83-89246-19-8, 25 - 30.

  83. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Halima Tahirova, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, H. Tahirova:
    "INTELLIGENT FLEXIBLE DISASSEMBLY AND RECYCLING OF USED PRODUCTS TO SUPPORT TOTAL QUALITY MANAGEMENT AND SUSTAIABILITY IN EUROPEAN INDUSTRY";
    in: "Proceedings of Third International Working Conference", International Working Conference Total Quality Management - Advanced and Intelligent Approaches, Belgrade, 2005, ISBN: 86-7083-514-2, 1 - 4.

  84. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Halima Tahirova, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, H. Tahirova, A. Afjehi-Sadat:
    "Implementation of Life-Cycle Assessment (LCA) for better waste management in countries of Europe, Caucasus and central Asia";
    in: "ICPM 2005 Proceedings", issued by: Wien; Abteilung für Austauschbau und Messtechnik, TU Wien, 2005, ISBN: 3-901-888-31-4, 257 - 264.

  85. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Kambiz Yaghmaei; Lukas Kräuter
    Other person involved: Milan Tysler

    P.H. Osanna, M.N. Durakbasa, K. Yaghmaei, L. Kräuter:
    "Quality Control And Nanometrology For Micro/nano Surface Modification Of Orthopaedic/dental Implants";
    in: "MEASUREMENT 2009", M. Tysler et al. (ed.); issued by: Institute of Measurement Science, SAS; Komprint s.r.o., Bratislava, 2009, ISBN: 978-80-969672-1-6, 167 - 172.

  86. Authors: Peter Herbert Osanna, E311 - AuM; Erdal Sarigül; M. Numan Durakbasa, E311 - AuM; A. Osanna
    Other persons involved: G. Rzevski; R.A. Adey; D.W. Russel

    P.H. Osanna, E. Sarigül, M.N. Durakbasa, A. Osanna:
    "The Role of Databanks for Artificial Intelligence Based Measurement and Control in Computer Integrated Production";
    in: "G Rzevski; R A Adey; D W Russell", G. Rzevski, R. Adey, D. Russel (ed.); issued by: Southampton ; Boston : Computational Mechanics Publications; Southampton ; Boston : Computational Mechanics Publications, Southampton, 1994, ISBN: 1-85312-284-x, 471 - 478.

  87. Authors: Jyri Papstel; Branko Katalinic, E311 - IMS
    Other persons involved: Branko Katalinic, E311 - IMS; Jyri Papstel

    J. Papstel, B. Katalinic:
    "Preface";
    in: "Proceedings of the 4th International Conference Industrial Engineering - New Challenges to SME", B. Katalinic, J. Papstel (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna & DAAAM National Estonia, Vienna-Tallinn, 2004, (invited), ISBN: 9985-894-59-6, 4.

  88. Authors: Philip Peterko; Christoph Habersohn, E311 - FET; Christoph Lechner, E311 - FET; Heinz Kaminski, E308 - P; Martin Jech, AC2T; Fritz Bleicher, E311 - FET
    Other person involved: Friedrich Franek, E366 - MST

    P. Peterko, Ch. Habersohn, C. Lechner, H. Kaminski, M. Jech, F. Bleicher:
    "Untersuchung des Einflusses des Schlagverdichtens auf die tribologischen Eigenschaften von Metalloberflächen";
    in: "Proceedings of the ÖTG Symposium 2011", F. Franek (ed.); issued by: Österreichische Tribologie Gesellschaft; Österreichische Tribologie Gesellschaft, Wiener Neustadt, 2011, (invited), ISBN: 978-3-901657-40-5, 49 - 56.

  89. Authors: Konrad Pfadenhauer, E311 - RIF; Burkhard Kittl, E311 - RIF
    Other person involved: Branko Katalinic, E311 - IMS

    K. Pfadenhauer, B. Kittl:
    "Reactive Scheduling for Batch Processors";
    in: "Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium", B. Katalinic (ed.); DAAAM International Vienna, Vienna, 2003, ISBN: 3-901509-34-8, 357 - 358.

    More information

  90. Authors: Konrad Pfadenhauer, E311 - RIF; Burkhard Kittl, E311 - RIF

    K. Pfadenhauer, B. Kittl:
    "Why modeling tools and methodologies for a service oriented shop floor architecture are needed";
    in: "7th International Conference on Computer Integrated Manufacturing", Scientific Fascicles of the Department of Engineering Process Automation and Integrated Manufacturing Systems, Silesian University of Technology, Gliwice, 2005, ISBN: 83-915011-3-2, 183 - 187.

    More information

  91. Authors: Konrad Pfadenhauer, E311 - RIF; Burkhard Kittl, E311 - RIF

    K. Pfadenhauer, B. Kittl:
    "With a system approach towards a model driven service architecture for the shop floor";
    in: "Proceedings of the 2004 International Research Conference on Innovations in Information Technology (IIT2004)", College of Information Technology, UAE University, Dubai, 2004, 8 pages.

    More information

  92. Authors: Falko Puschitz, E311 - FET; Fritz Bleicher, E311 - FET; Thomas Mikats, E311 - FET; Tyler Nichol, E311 - FET
    Other person involved: Branko Katalinic, E311 - IMS

    F. Puschitz, F. Bleicher, T. Mikats, T. Nichol:
    "NC-Controller Strategy For The Novel Machine Tool "X-Cut"";
    in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-70-4, 1691 - 1692.

    More information

  93. Authors: Marko Radosevic; Branko Katalinic, E311 - IMS; Paulina Cesarec, E311 - IMS; Sanjin Stimac; Branimir Barisic
    Other person involved: Branko Katalinic, E311 - IMS

    M. Radosevic, B. Katalinic, P. Cesarec, S. Stimac, B. Barisic:
    "Making Device for Torque Initiation which is applied in Torque Wrench Calibration";
    in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2010, ISBN: 978-3-901509-73-5, 1521 - 1522.

  94. Authors: Sanjin Stimac; Branko Katalinic, E311 - IMS; Paulina Cesarec, E311 - IMS; Marko Radosevic; Branimir Barisic
    Other person involved: Branko Katalinic, E311 - IMS

    S. Stimac, B. Katalinic, P. Cesarec, M. Radosevic, B. Barisic:
    "Measurement of the Closing Force on the Medical Bottles";
    in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2010, ISBN: 978-3-901509-73-5, 1523 - 1524.

  95. Authors: Zeljko Tekic; Ilija Cosic; Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    Z. Tekic, I Cosic, B. Katalinic:
    "Framing Knowledge in Business Context";
    in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2010, ISBN: 978-3-901509-73-5, 555 - 556.

  96. Authors: Zeljko Tekic; Ilija Cosic; Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    Z. Tekic, I Cosic, B. Katalinic:
    "Innovation and Knowledge Creation Mechanisms";
    in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2011, ISBN: 978-3-901509-83-4, 0419 - 0420.

  97. Authors: Zeljko Tekic; Ilija Cosic; Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    Z. Tekic, I Cosic, B. Katalinic:
    "The Missing Link - Knowledge Creation and Innovation";
    in: "Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium: "Make Harmony between Technology and Nature, and Your Mind will Fly Free as a Bird"", B. Katalinic (ed.); issued by: DAAAM Vienna International; DAAAM International Vienna, Wien, 2012, ISBN: 978-3-901509-91-9, Paper ID Volume 23, No.1 CDRom Version, 4 pages.

  98. Authors: Zeljko Tekic; Branko Katalinic, E311 - IMS; Ilija Cosic
    Other person involved: Branko Katalinic, E311 - IMS

    Z. Tekic, B. Katalinic, I Cosic:
    "Key Characteristics of Knowledge";
    in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-70-4, 1747 - 1748.

  99. Authors: Iviza VEza; Branko Katalinic, E311 - IMS
    Other persons involved: Branko Katalinic, E311 - IMS; Iviza VEza; Bozenko Bilic

    I. VEza, B. Katalinic:
    "Preface";
    in: "Proceedings of the 3rd DAAAM International Conference on Advanced Technologies for Developing Countries", B. Katalinic, I. VEza, B. Bilic (ed.); issued by: Split; DAAAM International Vienna & University of Split, Vienna - Split, 2004, (invited), ISBN: 953-6114-68-2, 3.

  100. Authors: Emil Wessely; Branko Katalinic, E311 - IMS
    Other persons involved: Branko Katalinic, E311 - IMS; Emil Wessely

    E. Wessely, B. Katalinic:
    "Preface";
    in: "Proceedings of the 3rd Workshop 'Intelligent Manufacturing Systems'", B. Katalinic, E. Wessely (ed.); issued by: DAAAM Slovakia; DAAAM International Vienna, Vienna, 2001, ISBN: 3-901509-31-3, 5.

  101. Authors: Richard Zemann, E311 - FET; Fritz Bleicher, E311 - FET; Falko Puschitz, E311 - FET; Reinhard Zisser-Pfeifer, E311 - FET; Christoph Habersohn, E311 - FET
    Other person involved: Branko Katalinic, E311 - IMS

    R. Zemann, F. Bleicher, F. Puschitz, R. Zisser-Pfeifer, Ch. Habersohn:
    "Electrochemical Micromachining of Tungsten";
    in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"", B. Katalinic (ed.); issued by: DAAAM International Vienna; DAAAM International Vienna, Wien, 2011, ISBN: 978-3-901509-83-4, 0927 - 0928.

  102. Authors: Richard Zemann, E311 - FET; Fritz Bleicher, E311 - FET; Reinhard Zisser-Pfeifer, E311 - FET
    Other persons involved: Mollay; Lohrengel

    R. Zemann, F. Bleicher, R. Zisser-Pfeifer:
    "Some practical contributions of the technology of electrochemical micromaching with ultra short pulses";
    in: "Insect 2011", Mollay, Lohrengel (ed.); issued by: Centre of Electrochemical Surface Technology; CEST, Wiener Neustadt, 2011, (invited), ISBN: 978-3-00-036247-7, 62 - 67.


Talks and Poster Presentations (with Proceedings-Entry)


  1. Authors: Beatrix Adjassoho, E308 - Gr Kozesch; Ernst Kozeschnik, E308 - Gr Kozesch; Christoph Lechner, E311; Fritz Bleicher, E311 - FET; Stefan Gössinger, E302 - 2; Christian Bauer, E302 - 2
    Other person involved: Branko Katalinic, E311 - IMS

    B. Adjassoho, E. Kozeschnik, C. Lechner, F. Bleicher, S. Gössinger, C. Bauer:
    "Induction of residual stresses and increase of surface hardness by Machine Hammer Peening technology";
    Talk: 23rd International DAAAM Symposium, Zadar, Kroazien; 10-24-2012 - 10-27-2012; in: "Annals of DAAAM for 2012&Proceeding of the 23rd International DAAAM Symposium", B. Katalinic (ed.); Annals of DAAAM for 2012 & Proceeding of the 23rd International DAAAM Symposium/DAAAM International Vienna, 23/1 (2012), ISSN: 2304-1382; 697 - 702.

    More information

  2. Author: Ali Afjehi-Sadat, E311 - AuM

    A. Afjehi-Sadat:
    "Machine Design and Metrology in Nanotechnology and Need for Standardization";
    Talk: International Scientific Conference, DMC 2007, Kosice, Slowakei (invited); 10-15-2007 - 10-16-2007; in: "Development of Metal Cutting DMC 2007", (2007), ISBN: 978-80-8073-858-7; 277 - 280.

  3. Author: Ali Afjehi-Sadat, E311 - AuM
    Other person involved: Hungary University of Miskolc

    A. Afjehi-Sadat:
    "Nanotechnologies and Nanometrology for Precision Production";
    Talk: 12th International Conference on Tools - ICT2007, Miskolc, Ungarn (invited); 09-06-2007 - 09-08-2007; in: "Proceedings of the 12th International Conference on Tools", H. University of Miskolc (ed.); (2007), ISSN: 1215-0851; 353 - 360.

  4. Author: Ali Afjehi-Sadat, E311 - AuM

    A. Afjehi-Sadat:
    "Nanotechnologiy and Nanometrology Outlook with Consideration of Standardization";
    Talk: 8th International Conference - Modern Technologies in Manufacturing - MTeM2007, Cluj-Napoca (invited); 10-04-2007 - 10-05-2007; in: "Proceedings of the 8th International Conference - Modern Technologies in Manufacturing", (2007), ISBN: 973-9087-83-3; 7 - 10.

  5. Author: Ali Afjehi-Sadat, E311 - AuM

    A. Afjehi-Sadat:
    "Nanotechnology and Nanometrology in Modern Production";
    Keynote Lecture: IV. International Congress on Precision Machining - ICPM 2007, Sandomierz - Kielce, Polen (invited); 09-25-2007 - 09-28-2007; in: "International Congress on Precision Machining - ICPM 2007 Proceedings", (2007), ISBN: 978-83-88906-91-6; 35 - 39.

  6. Authors: Ali Afjehi-Sadat, E311 - AuM; Peter Herbert Osanna, E311 - AuM

    A. Afjehi-Sadat, P.H. Osanna et al.:
    "Investigation of 3D Topography of Surface Measurement after Hard Turning and Grinding";
    Talk: International Scientific Conference MicroCAD 2006, Miskolc, Ungarn (invited); 03-16-2006 - 03-17-2006; in: "MicroCAD 2006", (2006), ISBN: 9636617007; 211 - 217.

  7. Authors: Farsad Badjgholi, E311 - RIF; Burkhard Kittl, E311 - RIF; Markus Stumptner

    F. Badjgholi, B. Kittl, M. Stumptner:
    "Automated Toolset Selection for Feature Manufacturing";
    Talk: 7th International Conference on Artificial Intelligence in Design, Cambridge, UK; 07-15-2002 - 07-17-2002; in: "Proceedings of Seventh International Conference on Artificial Intelligence in Design", Kluwer Scientific Publisher, (2002), ISBN: 1-4020-0716-7.

    More information

  8. Authors: Farsad Badjgholi, E311 - RIF; Burkhard Kittl, E311 - RIF; Ludwig Wieser
    Other person involved: Branko Katalinic, E311 - IMS

    F. Badjgholi, B. Kittl, L. Wieser:
    "A Knowledge Based Approach for the Design of Pressing Dies";
    Talk: 15th International DAAAM Symposium, Vienna; 11-03-2004 - 11-06-2004; in: "Annals of DAAAM for 2004 & Proceedings of the 15th International DAAAM Symposium", B. Katalinic (ed.); DAAAM International Vienna, (2004), ISBN: 3-901509-42-9; 23 - 24.

    More information

  9. Authors: Joze Balic; Franci Cus; M. Prasnicki; Branko Katalinic, E311 - IMS

    J. Balic, F. Cus, M. Prasnicki, B. Katalinic:
    "Computer-Aided Engineering System for Die/Mold Design and Manufacture";
    Talk: 3rd International Conference on Automation Technology, Taipei, Taiwan; 07-06-1994 - 07-09-1994; in: "Proc. 3rd International Conference on Automation Technology", (1994), 45 - 47.

  10. Author: Ferdinand Bammer, E311 - LLU

    F. Bammer:
    "A new concept for a high brilliance high power diode laser";
    Talk: CLEO/Europe-EQEC 2003, München; 06-23-2003 - 06-26-2003; in: "Lasers and Electro-Optics (CLEO Europe), 2003 Conference on", IEEE, (2003), ISBN: 0-7803-7734-6; 159.

    More information

  11. Author: Ferdinand Bammer, E311 - LLU
    Other person involved: Alexander Kaplan

    F. Bammer:
    "A New Concept for a High Power Diode Laser and Possible Applications";
    Talk: M4PL17, Igls/Tirol; 01-21-2004 - 01-23-2004; in: "Proceedings M4PL17", A. Kaplan (ed.); (2004), 21 pages.

    More information

  12. Author: Ferdinand Bammer, E311 - LLU
    Other person involved: Dieter Schuöcker, E311 - LLU

    F. Bammer:
    "New developments in the field of diode lasers";
    Talk: GCL HPL 2006, Gmunden (invited); 09-04-2006 - 09-08-2006; in: "Proceedings of GCL 06, XVI International Symposium on Gas Flow, Chemical Lasers and High-Power Lasers", D. Schuöcker (ed.); SPIE, 6346 (2007), ISBN: 978-0-8194-6430-9; 63460T-1 - 63460T-6.

    More information

  13. Author: Ferdinand Bammer, E311 - LLU
    Other person involved: Dieter Schuöcker, E311 - LLU

    F. Bammer:
    "Q-switching with photo-elastic modulators";
    Talk: GCL HPL 2006, Gmunden; 09-04-2006 - 09-08-2006; in: "Proceedings of GCL 06, XVI International Symposium on Gas Flow, Chemical Lasers and High-Power Lasers", D. Schuöcker (ed.); SPIE, 6346 (2007), ISSN: 0277-786x; 634611-1 - 634611-5.

    More information

  14. Authors: Ferdinand Bammer; Robert Bielak, E311 - LLU; Bernhard Holzinger, E311 - LLU; Alexander Kratky, E311 - LLU; Gerhard Liedl, E311 - LLU; Martin Kaltenbrunner, E311 - LLU; Dieter Schuöcker, E311 - LLU

    F. Bammer, R. Bielak, B. Holzinger, A. Kratky, G. Liedl, M. Kaltenbrunner, D. Schuöcker:
    "New Developments in Lasers Assisted Forming";
    Talk: ICONO/LAT Conference 2005, St. Petersburg Russia (invited); 05-11-2005 - 05-15-2005; in: "Icono/Lat 2005", (2005).

    More information

  15. Authors: Ferdinand Bammer, E311 - LLU; Bernhard Holzinger, E311 - LLU

    F. Bammer, B. Holzinger:
    "A compact high brilliance diode laser";
    Talk: Photonics West 2006, San Jose, Kalifornien, USA; 01-21-2006 - 01-26-2006; in: "Proceedings of SPIE, High-Power Diode Laser Technology and Applications IV", SPIE, 6104 (2006), ISSN: 0277-786x.

    More information

  16. Authors: Ferdinand Bammer, E311 - LLU; Bernhard Holzinger, E311 - LLU
    Other persons involved: Igor A. Sukhoivanov; Vasily A. Svich; Yuriy S. Shmaliy

    F. Bammer, B. Holzinger:
    "A new compact high brilliance diode laser type";
    Talk: 2nd International Conference on Advanced Optoelectronics and Lasers, Yalta, Krim, Ukraine; 09-12-2005 - 09-17-2005; in: "Second International Conference on Advanced Optoelectronics and Lasers", I.A. Sukhoivanov, V.A. Svich, Y.S. Shmaliy (ed.); Proceedings of SPIE, 7009 (2008).

    More information

  17. Authors: Ferdinand Bammer, E311 - LLU; Bernhard Holzinger, E311 - LLU

    F. Bammer, B. Holzinger:
    "Possibilities of time-multiplexing with diode lasers";
    Poster: LANE 2004, Erlangen; 09-21-2004 - 09-24-2004; in: "Laser Assisted Net Shape Engineering 4, Vol 2", Meisenbach-Verlag Bamberg, Volume 2 (2004), ISBN: 3-87525-202-0; 1235 - 1242.

    More information

  18. Authors: Ferdinand Bammer, E311 - LLU; Bernhard Holzinger, E311 - LLU

    F. Bammer, B. Holzinger:
    "Realization of time-multiplexing for high power diode lasers";
    Talk: GCL/HPL 2004, Prague; 08-30-2004 - 09-03-2004; in: "XV International Symposium on Gas Flow, Chemical Lasers and High-Power Lasers", Proceedings of SPIE, 5777 (2004), ISBN: 0-8194-5760-4; 394 - 397.

    More information

  19. Authors: Ferdinand Bammer, E311 - LLU; Bernhard Holzinger, E311 - LLU

    F. Bammer, B. Holzinger:
    "Time-multiplexing of high power laser diodes yields a high brilliance laser beam";
    Talk: 2nd International Conference on Advanced Optoelectronics and Lasers, Yalta; 09-12-2005 - 09-17-2005; in: "Proceedings CAOL 2005", IEEE, CN 05TH8809 (2005), ISBN: 0-7803-9130-6; 240 - 242.

  20. Authors: Ferdinand Bammer, E311 - LLU; Bernhard Holzinger, E311 - LLU; Thomas Schumi, E311 - LLU
    Other persons involved: Shibin Jiang; Michel Digonnet

    F. Bammer, B. Holzinger, T. Schumi:
    "A single crystal photo-elastic modulator";
    Talk: Photonics West 2007, San Jose, Kalifornien, USA; 01-22-2007 - 01-24-2007; in: "Proceedings of SPIE, Optical Components and Materials IV", S. Jiang, M. Digonnet (ed.); SPIE, 6469 (2007), ISSN: 0277-786x; 64690O-1 - 64690O-8.

    More information

  21. Authors: Ferdinand Bammer, E311 - LLU; Rok Petkovsek, University Ljubljana; Hugo Dominguez; Gerhard Liedl, E311 - LLU

    F. Bammer, R. Petkovsek, H. Dominguez, G. Liedl:
    "Nd:YAG-Laser-Q-switching with a Photo-Elastic Modulator and Applications";
    Talk: Photonics Europe 2010, Brüssel; 04-12-2010 - 04-16-2010; in: "Proceedings of SPIE, Solid State Lasers and Amüplifiers IV, and High-Power Lasers", SPIE Proceedings, Vol. 7721 (2010), ISBN: 978-0-8194-8194-8; 77210Y-1 - 77210Y-6.

    More information

  22. Authors: Ferdinand Bammer, E311 - LLU; Rok Petkovsek, University Ljubljana; Maik Frede; Bastian Schulz, LZH

    F. Bammer, R. Petkovsek, M. Frede, B. Schulz:
    "Q-switching with a Dual Mode Single Crystal Photo-Elastic Modulator";
    Talk: GCL/HPL 2008, Lissabon; 09-15-2008 - 09-19-2008; in: "Proceedings of GCL 08, XVII International Symposium on Gas Flow, Chemical Lasers and High-Power Lasers", SPIE Proc., 7131 (2008), ISBN: 9780819473653; 7131H-1 - 7131H-4.

    More information

  23. Authors: Ferdinand Bammer, E311 - LLU; Rok Petkovsek, University Ljubljana; Janez Mozina, Univ. Ljubjana; Jaka Petelin, Univ. Ljubljana

    F. Bammer, R. Petkovsek, J. Mozina, J. Petelin:
    "A Small and Fast SCPEM-Based Ellipsometer";
    Poster: Photonics West 2010, San Francisco, USA; 01-26-2010 - 01-28-2010; in: "Proceedings of SPIE, Optical Components and Materials VII", SPIE-Proceedings, Vol. 7598 (2010), ISBN: 9780819479945; 75981T-1 - 75981T-8.

    More information

  24. Authors: Ferdinand Bammer, E311 - LLU; Rok Petkovsek, University Ljubljana; Janez Mozina, Univ. Ljubjana; Dieter Schuöcker, E311 - LLU
    Other persons involved: Thomas Graf; Jonathan A. Terry; Helena Jelinkova

    F. Bammer, R. Petkovsek, J. Mozina, D. Schuöcker:
    "Q-switching a fiber laser with a dual mode single crystal photo-elastic modulator";
    Talk: Photonics Europe 2008 (SPIE), Straßburg; 04-07-2008 - 04-10-2008; in: "Solid State Lasers and Amplifiers III", T. Graf, J. Terry, H. Jelinkova (ed.); SPIE, 6998 (2008), ISSN: 0277-786x; 1 - 8.

    More information

  25. Authors: Ferdinand Bammer, E311 - LLU; Thomas Schumi, E311 - LLU; Dieter Schuöcker, E311 - LLU

    F. Bammer, T. Schumi, D. Schuöcker:
    "Hot Bending with a Fiber Coupled Solid State Laser";
    Talk: GCL/HPL 2010, Sofia; 08-30-2010 - 09-03-2010; in: "XVIII International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers", SPIE, 7751 (2010), 775122-1 - 775122-6.

    More information

  26. Authors: Gökcen Bas, E311 - AuM; Pinar Demircioglu; M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM

    G. Bas, P. Demircioglu, M.N. Durakbasa, P.H. Osanna:
    "A nanometrological management approach to assess the profile and the surface characteristics of the end milling tools by multi-measurement analysis";
    Talk: IMEKO XX World Congress International Measurement Confederation, Busan, Korea; 09-09-2012 - 09-14-2012; in: "Proceedings of XX IMEKO World Congress International Measurement Confederation", (2012), ISBN: 978-89-950000-5-2; 6 pages.

    More information

  27. Authors: Gökcen Bas, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Ildiko Mankova; Jozef Beno
    Other persons involved: Jan Manka; Milan Tysler; Viktor Witkowsky; Ivan Frollo

    G. Bas, M.N. Durakbasa, I. Mankova, J. Beno:
    "Application of Nanometrology for Assessing the Machining Tool Geometry and Analysis of the Micro/Nano Structure of the End Milling Tool Surfaces";
    Talk: 9th International Conference on Measurement, Smolenice, Slowakei; 05-27-2013 - 05-30-2013; in: "Proceedings of the 9th International Conference on Measurement", J. Manka, M. Tysler, M. Witkowsky, i. Frollo (ed.); VEDA Publishing House of the Slovak Academy of Sciences, 1 (2013), ISBN: 978-80-969-672-5-4; 223 - 226.

    More information

  28. Authors: Johannes Bernreiter, E311 - FET; Fritz Bleicher, E311 - FET

    J. Bernreiter, F. Bleicher:
    "FEM Simulation von Zerspanungsprozessen";
    Talk: Abaqus Austria Regional Userīs Meeting 2007, Salzburg; 11-12-2007 - 11-13-2007; in: "Abaqus Austria Userīs Conference 2007", (2007), 29 pages.

  29. Authors: Johannes Bernreiter, E311 - FET; Fritz Bleicher, E311 - FET

    J. Bernreiter, F. Bleicher:
    "Hybridbearbeitung";
    Talk: KC-Fachtagung NÖ, Wirtschaftkammer NÖ; 01-27-2010; in: "Kunststoff- Cluster: Fachtagung - Spritzgießwerkzeuge", (2010), 1 - 21.

  30. Authors: Robert Bielak, E311 - LLU; Ferdinand Bammer, E311 - LLU; Georg Schuöcker, E311 - LLU; Gerhard Liedl, E311 - LLU; Alexander Kratky, E311 - LLU

    R. Bielak, F. Bammer, G Schuöcker, G. Liedl, A. Kratky:
    "Virtual age in education and training";
    Poster: LANE 2004, Erlangen; 09-21-2004 - 09-24-2004; in: "Proceedings of the 4th LANE", Meisenbach Bamberg, (2004), ISBN: 3-87525-202-0; 1221 - 1226.

  31. Authors: Robert Bielak, E311 - LLU; Gerhard Liedl, E311 - LLU; Mária Behúlová

    R. Bielak, G. Liedl, M. Behúlová:
    "Contribution to the lightweight alloy warm tube hydroforming";
    Talk: Comec 2010 : VI Conferencia Cientifica Internacional de Ingeniería Mecánica, Villa Clara, Cuba; 11-02-2010 - 11-04-2010; in: "COMEC 2010", (2010), ISBN: 978-959-250-602-2.

  32. Authors: Robert Bielak, E311 - LLU; Gerhard Liedl, E311 - LLU; Robert Pospichal, E311 - LLU

    R. Bielak, G. Liedl, R. Pospichal:
    "FEM simulation of technical textiles laser cuting";
    Talk: 12th International Conference Technology, Bratislava; 09-13-2011; in: "Technology 2011", Slovak University of Technology, Bratislava (2011), ISBN: 978-80-227-3545-2; 371 - 376.

    More information

  33. Author: Fritz Bleicher, E311 - FET
    Other person involved: Reimund Neugebauer

    F. Bleicher:
    "Automatically Operating Calibration Method for a Three-Axis Parallel Kinematic Machine";
    Talk: The 4th Chemnitz Parallel Kinematics Seminar, Chemnitz; 04-20-2004 - 04-21-2004; in: "Parallel Kinematic Machines in Research and Practice", R. Neugebauer (ed.); Verlag Wissenschaftliche Scripten, Volume 24/Zwickau (2004), ISBN: 3-937524-05-3; 165 - 181.

  34. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Calibration of three-axes machine tool based on parallel kinematics";
    Talk: 12th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Precision Engineering, Vienna; 10-24-2001 - 10-27-2001; in: "Intelligent Manufacturing & Automation", (2001), ISBN: 3-901509-19-4; 23 - 24.

  35. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Neue Werkzeugmaschinenkonzepte auf Basis von Parallelkinematiken";
    Talk: 2. Österreichische Technologie-Transfer-Tage, Leoben (invited); 03-22-2001 - 03-23-2001; in: "2. Österreichische Technologie-Transfer-Tage", (2001).

    More information

  36. Authors: Fritz Bleicher, E311 - FET; Johannes Bernreiter, E311 - FET

    F. Bleicher, J. Bernreiter:
    "Hybrid-Machining Of Brittle-Hard Materials";
    Poster: 27th Symposium on advances in experimental machanics, Wroclaw; 09-22-2010 - 09-25-2010; in: "27th Symposium on advances in experimental machanics", (2010), ISBN: 978-83-87982-59-1; 11 - 12.

  37. Authors: Fritz Bleicher, E311 - FET; Johannes Bernreiter, E311 - FET
    Other person involved: Dirk Biermann

    F. Bleicher, J. Bernreiter:
    "Hybridbearbeitung von SiC - Optimierung der spanenden Bearbeitung durch Ultraschallanregung";
    Talk: Zerspanen im modernen Produktionsprozess, Dortmund; 09-14-2010 - 09-15-2010; in: "Zerspanen im modernen Produktionsprozess", D. Biermann (ed.); Vulkan Verlag, Dortmund (2010), ISBN: 978-3-8027-8755-3; 47 - 55.

    More information

  38. Authors: Fritz Bleicher, E311 - FET; Johannes Bernreiter, E311 - FET

    F. Bleicher, J. Bernreiter:
    "Interaktion Maschine - Prozess durch Mechatronik";
    Keynote Lecture: Icmc 2012 / 2. Eniprod-Kolloquium, Chemnitz (invited); 04-17-2012 - 04-18-2012; in: "Ressourceneffiziente Technologien für den Powertrain", Verlag Wissenschaftliche Scripten, (2012), ISBN: 978-3-942267-40-3; 195 - 211.

  39. Authors: Fritz Bleicher, E311 - FET; Johannes Bernreiter, E311 - FET

    F. Bleicher, J. Bernreiter:
    "Machine and Process Interaction by Mechatronics";
    Keynote Lecture: 9th International Conference on Machine Tools, Automation, Technology and Robotics, Prag; 09-12-2012 - 09-14-2012; in: "Matar 2012", MM Science Journal, Special Issue (2012), ISSN: 1803-1269; 1 - 6.

  40. Authors: Fritz Bleicher, E311 - FET; Johannes Bernreiter, E311 - FET

    F. Bleicher, J. Bernreiter:
    "Mechanische Oberflächenmodifikation und Strukturierung als Technologie für den Werkzeugbau";
    Talk: KC-Fachtagung, Wirtschaftkammer NÖ (invited); 01-27-2010; in: "Kunststoff- Cluster: Fachtagung - Spritzgießwerkzeuge", (2010), 18.

  41. Authors: Fritz Bleicher, E311 - FET; Johannes Bernreiter, E311 - FET; Michael Heger, E311 - FET; Reinhard Prenner, E222 - 1; Simon Wallner, E222 - 1; Norbert Krouzecky, E222 - 1

    F. Bleicher, J. Bernreiter, M. Heger, R. Prenner, S. Wallner, N. Krouzecky:
    "Digital Scale Modelling of rough Boundaries in Spillway Conduits";
    Poster: 27th Symposium on advances in experimental machanics, Wroclaw; 09-22-2010 - 09-25-2010; in: "27th Symposium on advances in experimental machanics", (2010), ISBN: 978-83-87982-59-1; 13 - 14.

  42. Authors: Fritz Bleicher, E311 - FET; Johannes Bernreiter, E311 - FET; Martin Obermair, E311 - FET
    Other persons involved: Fritz Bleicher, E311 - FET; Martin Obermair, E311 - FET

    F. Bleicher, J. Bernreiter, M. Obermair:
    "Trends in der Fertigungstechnik";
    Talk: Wiener Produktionstechnik Kongress 2012, Wien; 10-10-2012 - 10-11-2012; in: "Die Zukunft der Fertigungstechnik - Tagungsband Wiener Produktionstechnik Kongress 2012", F. Bleicher, M. Obermair (ed.); Neuer Wissenschaftlicher Verlag GmbH Nfg KG, Wien - Graz (2012), ISBN: 978-3-7083-0872-2; 17 - 32.

  43. Authors: Fritz Bleicher, E311 - FET; Franz Holy

    F. Bleicher, F. Holy:
    "Entwicklung von der EMO - Maschine zur Serienlösung des Quicksteps";
    Talk: Fertigungstechnisches Kolloquium Stuttgart, Stuttgart (invited); 09-26-2000 - 09-27-2000; in: "Stuttgarter Impulse - Technologien für die Zukunft", Springer-Verlag Berlin Heidelberg New York, (2000), ISBN: 3-540-67984-7; 334 - 341.

    More information

  44. Authors: Fritz Bleicher, E311 - FET; Christoph Lechner, E311 - FET; Christoph Habersohn, E311 - FET; Ernst Kozeschnik, E308 - Gr Kozesch; Beatrix Adjassoho, E308 - Gr Kozesch; Heinz Kaminski, E308 - P

    F. Bleicher, C. Lechner, Ch. Habersohn, E. Kozeschnik, B. Adjassoho, H. Kaminski:
    "Mechanism of surface modification using machine hammer peening technology";
    Talk: CIRP - 62nd General Assembly, Hong Kong (invited); 08-19-2012 - 08-25-2012; in: "CIRP Annals-Manufacturing Technology", CIRP Annals-Manufacturing Technology, 61 (2012), ISSN: 0007-8506; 375 - 378.

  45. Authors: Fritz Bleicher, E311 - FET; Christoph Lechner, E311 - FET; Christoph Habersohn, E311 - FET; Martin Obermair, E311 - FET; Franz Heindl, ACēT research GmbH; Manel Rodríguez Ripoll, ACēT research GmbH

    F. Bleicher, C. Lechner, Ch. Habersohn, M. Obermair, F. Heindl, M. Rodríguez Ripoll:
    "Improving the tribological characteristics of tool and mould surfaces by machine hammer peening";
    Talk: Cirp 2013 - 63rd General Assembly, Copenhagen (invited); 08-18-2013 - 08-24-2013; in: "Cirp Annals - ManufacturingTechnology", Science Direct, 62/1 (2013), ISSN: 0007-8506; 239 - 242.

  46. Authors: Fritz Bleicher, E311 - FET; Christoph Lechner, E311 - FET; Martin Obermair, E311 - FET; Stephan Krall, E311

    F. Bleicher, C. Lechner, M. Obermair, S. Krall:
    "Improvement of die casting life time by machine hammer peening";
    Keynote Lecture: HSM 2014 11th Conference Hig Speed Machining, Prag (invited); 09-11-2014 - 09-12-2014; in: "Proceedings of the 11th International Conference on High Speed Machining", Czech Machine Tool Society CMTS, (2014), ISBN: 978-80-904077-7-0; 7 - 13.

  47. Authors: Fritz Bleicher, E311 - FET; Thomas Mikats, E311 - FET

    F. Bleicher, T. Mikats:
    "Next Generation of Machine Tools - Flexible, Versatile und Highly Productive";
    Talk: 14th International Scientific Conference on Production Engineering, Biograd (invited); 06-19-2013 - 06-22-2013; in: "CIM 2013 Computer Integrated Manufacturing and High Speed Machining", Croatian Association of Production Engineering, Zagreb (2013), ISBN: 978-953-7689-02-5; 13 - 23.

  48. Authors: Fritz Bleicher, E311 - FET; Falko Puschitz, E311 - FET; Adolf Theiner, E311 - FET
    Other person involved: Reimund Neugebauer

    F. Bleicher, F. Puschitz, A. Theiner:
    "Laser Based Measurement System for Calibrating Machine Tools in 6 DOF";
    Talk: The 5th Chemnitz Parallel Kinematics Seminar, Chemnitz; 04-25-2006 - 04-26-2006; in: "Parallel Kinematic Machines in Research and Practice", R. Neugebauer (ed.); Verlag Wissenschaftlicher Scripten, Zeickau (2006), ISBN: 3-937524-40-1; 617 - 634.

    More information

  49. Authors: Fritz Bleicher, E311 - FET; Wolfgang Schwanzer; Adolf Wolf

    F. Bleicher, W. Schwanzer, A. Wolf:
    "Quickstep - Vorstellung eines parallelen Maschinenkonzepts mit drei Freiheitsgraden";
    Talk: 2. Chemnitzer Parallelkinematik-Seminar, Chemnitz; 04-12-2000 - 04-13-2000; in: "Working Accuracy of Parallel Kinematics", Verlag Wissenschaftliche Scripten, (2000), ISBN: 3-928921-54-1; 283 - 290.

    More information

  50. Authors: Fritz Bleicher, E311 - FET; Helmar Weseslindtner, E311

    F. Bleicher, H. Weseslindtner:
    "Produktionstechnik als Wettbewerbsfaktor der Zukunft";
    Talk: 2. Tiroler Innovationstag, Innsbruck (invited); 10-12-2004; in: "2. Tiroler Innovationstag", 2 (2004), 1 - 35.

    More information

  51. Authors: Ismail Bogrekci; Pinar Demircioglu; Yunus Cerci; Coskun Deniz; M. Numan Durakbasa, E311 - AuM

    I. Bogrekci, P. Demircioglu, Y. Cerci, C. Deniz, M.N. Durakbasa:
    "Roughness measurement verification of the surface structures produced by different manufacturing techniques by wavelet transform";
    Talk: ISMQC - International Symposium on Measurement and Quality Control, Krakow-Kielce, Polen; 09-11-2013 - 09-13-2013; in: "Proceedings of the 11th International Symposium on Measurement and Quality Control", Osaka University, (2013).

    More information

  52. Authors: Christian Buchner; Zoltan Zelenka; Thomas Mikats, E311 - FET; Fritz Bleicher, E311 - FET

    C. Buchner, Z. Zelenka, T. Mikats, F. Bleicher:
    "Determination of forces from 10 N up to 250 kN using two full automatical dead weight machines developed by the BEV";
    Talk: IMEKO XX World Congress International Measurement Confederation, Busan, Korea; 09-09-2012 - 09-14-2012; in: "IMEKO XX World Congress International Measurement Confederation", (2012), ##.

  53. Authors: Mehmet Cakmakci; M. Numan Durakbasa, E311 - AuM; M. Kemal Karasu; Gökcen Bas, E311 - AuM

    M. Cakmakci, M.N. Durakbasa, M. Karasu, G. Bas:
    "The relationship between the quality engineering and Taguchi methodology";
    Talk: ISMQC - International Symposium on Measurement and Quality Control, Krakow-Kielce, Polen; 09-11-2013 - 09-13-2013; in: "Proceedings of the 11th International Symposium on Measurement and Quality Control", Osaka University, (2013), 4 pages.

    More information

  54. Authors: Mehmet Cakmakci; Neslihan Ortabas-Demirel; M. Numan Durakbasa, E311 - AuM; Gökcen Bas, E311 - AuM; Adriana Hornikova, E311 - AuM

    M. Cakmakci, N. Ortabas-Demirel, M.N. Durakbasa, G. Bas, A. Hornikova:
    "Interaction Between Capability Indices and Skewness of Non-Normal Processes Using Quantile Based Estimation and Johnson Transformation";
    Talk: QIEM 2nd International Conference on Quality and Innovation in Engineering and Management, Cluj-Napoca, RO; 11-22-2012 - 11-24-2012; in: "Quality Access to Success - QIEM 2nd International Conference on Quality and Innovation in Engineering and Management", Quality-Access to Success, Vol.13, S5, November 2012 (2012), ISSN: 1582-2559; 8 pages.

    More information

  55. Authors: Ilknur Cavusoglu; M. Numan Durakbasa, E311 - AuM

    I. Cavusoglu, M.N. Durakbasa:
    "The Quality Improvement Process Through Application Of Multi-Vari Chart In An Automotive Supplier";
    Talk: Proceedings of ICPR-AEM and QIEM 2014 Conference, Cluj-Napoca, Rumänien; 07-01-2014 - 07-05-2014; in: "2014 INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH - REGIONAL CONFERENCE AFRICA, EUROPE AND THE MIDDLE EAST and 3rd INTERNATIONAL CONFERENCE ON QUALITY AND INNOVATION IN ENGINEERING AND MANAGEMENT", Technical University of Cluj- Napoca (2014), ISBN: 978-973-662-978-5; 4 pages.

    More information

  56. Authors: Ilknur Cavusoglu; M. Numan Durakbasa, E311 - AuM
    Other persons involved: Ali Afjehi-Sadat, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM

    I. Cavusoglu, M.N. Durakbasa:
    "TOTAL QUALITY MANAGEMENT (TQM) AND PROCESS IMPROVEMENT METHODS IN THE MODERN MANUFACTURING SYSTEMS";
    Poster: ICPM 2005 Proceedings, Wien; 10-18-2005 - 10-19-2005; in: "III. INTERNATIONAL CONGRESS OF PRECISION MACHINING", A. Afjehi-Sadat, M.N. Durakbasa, P.H. Osanna (ed.); (2005), ISBN: 3-901-888-31-4; 89 - 94.

  57. Authors: Ilknur Cavusoglu; M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM

    I. Cavusoglu, M.N. Durakbasa, P.H. Osanna:
    "PROCESS PERFORMANCE EVALUATION AND IMPROVEMENT FOR THE QUALITY PROGRESS IN THE INDUSTRIAL MANUFACTURING SYSTEMS";
    Poster: IMEKO XVIII World Congress, Rio de Janeiro; 09-17-2006 - 09-22-2006; in: "METROLOGY FOR A SUSTAINABLE DEVELOPMENT", LETRA CAPITAL EDITORA, Rio de Janeiro, B (2006), #.

  58. Authors: Yunus Cerci; Pinar Demircioglu; Ismail Bogrekci; Coskun Deniz; M. Numan Durakbasa, E311 - AuM

    Y. Cerci, P. Demircioglu, I. Bogrekci, C. Deniz, M.N. Durakbasa:
    "Case study in thermal and wear analyses for cutting tools";
    Talk: ISMQC - International Symposium on Measurement and Quality Control, Krakow-Kielce, Polen; 09-11-2013 - 09-13-2013; in: "Proceedings of the 11th International Symposium on Measurement and Quality Control", Osaka University, (2013), 4 pages.

    More information

  59. Authors: Deniz Coskun; Pinar Demircioglu; Ismail Bogrekci; M. Numan Durakbasa, E311 - AuM

    D. Coskun, P. Demircioglu, I. Bogrekci, M.N. Durakbasa:
    "Electrodynamical considerations in r-t measurements of high Tc bulk superconductivity: an inexpensive set up design";
    Talk: QIEM 2nd International Conference on Quality and Innovation in Engineering and Management, Cluj-Napoca, RO; 11-22-2012 - 11-24-2012; in: "Quality Access to Success - QIEM 2nd International Conference on Quality and Innovation in Engineering and Management", Quality-Access to Success, Vol.13, S5, November 2012 (2012), ISSN: 1582-2559; 8 pages.

    More information

  60. Authors: Can Davutoglu; Cem Tepeköylü; Erol Güclü, E311 - AuM; Gökcen Bas, E311 - AuM

    C. Davutoglu, C. Tepeköylü, E. Güclü, G. Bas:
    "INTACT - Intelligent Test Automation System to Achieve Improved Quality";
    Talk: International Business Information Management Association Conference (IBIMA), Wien, Österreich; 06-27-2013 - 06-28-2013; in: "Vision 2020: Innovation, Development Sustainability, and Economic Growth, Proceedings of the 21st International Business Information Management Association Conference (IBIMA)", (2013), ISBN: 978-0-9860419-0-7; Paper ID 1481-1486, 6 pages.

    More information

  61. Authors: Pinar Demircioglu; Ismail Bogrekci; Yunus Cerci; Coskun Deniz; Gökcen Bas, E311 - AuM; M. Numan Durakbasa, E311 - AuM

    P. Demircioglu, I. Bogrekci, Y. Cerci, C. Deniz, G. Bas, M.N. Durakbasa:
    "Assessment of cylinder liners using computer vision andnumerical thermal analyses";
    Talk: ISMQC - International Symposium on Measurement and Quality Control, Krakow-Kielce, Polen; 09-11-2013 - 09-13-2013; in: "Proceedings of he 11th International Symposium on Measurement and Quality Control", Osaka University, (2013).

    More information

  62. Authors: Pinar Demircioglu; M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Ismail Bogrekci

    P. Demircioglu, M.N. Durakbasa, P.H. Osanna, I. Bogrekci:
    "Surface roughness assessment of machined metal surfaces using image processing techniques";
    Talk: 10th International Symposium on Measurement Technology and Intelligent Instruments, KAIST, Daejeon, Korea; 06-29-2011 - 07-02-2011; in: "ISMTII 2011", 1 (2011), 1 - 4.

  63. Authors: Pinar Demircioglu; M. Numan Durakbasa, E311 - AuM; Ozgur Tan

    P. Demircioglu, M.N. Durakbasa, O. Tan:
    "A Comparison Between Contact Type Profilometer and Different D Optical Techniques: A Case Study in Characterization of Machined Surface Structures";
    Talk: QIEM 2nd International Conference on Quality and Innovation in Engineering and Management, Cluj-Napoca, RO; 11-22-2012 - 11-24-2012; in: "Quality Access to Success - QIEM 2nd International Conference on Quality and Innovation in Engineering and Management", Quality-Access to Success, Vol.13, S5, November 2012 (2012), ISSN: 1582-2559; 117 pages.

    More information

  64. Authors: Pinar Demircioglu; Asli Gunay; Binnur Sagbas; Ismail Bogrekci; M. Numan Durakbasa, E311 - AuM
    Other persons involved: Metin Akkök; Erhan Budak; Mehmet Firat; Bilgin Kaftanoglu

    P. Demircioglu, A. Gunay, B. Sagbas, I. Bogrekci, M.N. Durakbasa:
    "Surface Topographical Investigations of the Machining Effects on Turning with Coated lnserts for Different Materials";
    Talk: 7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Antalya; 06-20-2013 - 06-23-2013; in: "Design and Production of Machines and Dies/Molds", M. Akkök, E. Budak, M. Firat, B. Kaftanoglu (ed.); Atilim University Publications, 46, (2013), ISBN: 978-975-6707-38-8; 285 - 288.

  65. Authors: Christoph Dorn, E311 - FET; Fritz Bleicher, E311 - FET

    C. Dorn, F. Bleicher:
    "Untersuchung zur Energieeffizienz von Werkzeugmaschinen unter Berücksichtigung der kinematischen Struktur und der Prozesskräfte";
    Keynote Lecture: Industrielles Symposium Mechatronik, Linz (invited); 11-18-2010; in: "Smart Production", (2010).

    More information

  66. Authors: Christoph Dorn, E311 - FET; Iva Kovacic, E234 - 2; Kristina Orehounig, E259 - 3; Ulrich Renger, E311 - FET; Fritz Bleicher, E311 - FET; Ardeshir Mahdavi, E259 - 3; Stefan Brandstetter, E366 - ISS; Alexandros-Athanassi Dimitriou, E311
    Other person involved: Zelkjo Bogdan, Zagreb

    C. Dorn, I. Kovacic, K. Orehounig, U. Renger, F. Bleicher, A. Mahdavi, S. Brandstetter, A. Dimitriou:
    "Energy Efficient Production - Interdisciplinary, Systemic Approach Through Integrated Simulation";
    Talk: The 6th Dubrobnik Conference on Sustainable Development of Energy, Water, an Environment Systems, Dubrovnik; 09-25-2011 - 09-29-2011; in: "Sustainable Development Of Energy, Water And Environment Systems / 2011 / Croatia", Z. Bogdan et al. (ed.); Zagreb, Croatia (2011), ISBN: 978-953-7738-12-9; 307 - 320.

    More information

  67. Authors: Christoph Dorn, E311 - FET; Matthias Stark, E311; Fritz Bleicher, E311 - FET; Johannes Bernreiter, E311 - FET

    C. Dorn, M. Stark, F. Bleicher, J. Bernreiter:
    "Analyse Of Load Profile Of A Vertical And Horizontal Machining Center";
    Poster: 27th Symposium on advances in experimental machanics, Wroclaw; 09-22-2010 - 09-25-2010; in: "27th Symposium on advances in experimental mechanics", (2010), ISBN: 978-83-87982-59-1; 47 - 48.

    More information

  68. Author: M. Numan Durakbasa, E311 - AuM

    M.N. Durakbasa:
    "A Modern Scheme for Education, Training and Certification of Quality Personnel and Persons Working in Metrology and Engineering";
    Keynote Lecture: 2nd INTERNATIONAL 6th NATIONAL VOCATIONAL SCHOOLS SYMPOSIUM 2011, Aydin TR (invited); 05-25-2011 - 05-27-2011; in: "UMYOS'2011", 1, AYDIN (2011), 8 pages.

  69. Author: M. Numan Durakbasa, E311 - AuM

    M.N. Durakbasa:
    "Advanced Industrial Manufacturing Systems on Basis of Intelligent Precision Metrology";
    Keynote Lecture: Turkish National Comitee of Automatic Control 2011 National Meeting, Izmir (invited); 09-14-2011 - 09-16-2011; in: "TOK 2011", (2011), xxiii - xxx.

  70. Author: M. Numan Durakbasa, E311 - AuM

    M.N. Durakbasa:
    "Fertigungsmesstechnik aus der Sicht der Internationalen Normung";
    Talk: Kvalita a GPS 2005, Brno, CZ; 09-20-2005 - 09-21-2005; in: "Kvalita a GPS 2005", (2005), ISBN: 80-214-3033-8; 41 - 48.

  71. Author: M. Numan Durakbasa, E311 - AuM

    M.N. Durakbasa:
    "Nanometrologia a nanotechnologie v strojarstve";
    Talk: 41. Forum metrologov, Gerlachov - SK (invited); 11-21-2011 - 11-22-2011; in: "Metrologicke Listy", Rocnik XXXIV METROLOGICKE LISTY c. 2/2011 (2011), 46 - 54.

  72. Authors: M. Numan Durakbasa, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM; Peter Herbert Osanna, E311 - AuM

    M.N. Durakbasa, A. Afjehi-Sadat, P.H. Osanna:
    "Metrology of the Structure of High Precision Machined Workpiece Surfaces";
    Talk: International Scientific Conference MicroCAD 2006, Miskolc, Ungarn (invited); 03-16-2006 - 03-17-2006; in: "MicroCAD 2006", (2006), ISBN: 9636617007; 193 - 202.

  73. Authors: M. Numan Durakbasa, E311 - AuM; Anil Akdogan; Serdar Vanli; Asli Günay

    M.N. Durakbasa, A. Akdogan, S. Vanli, A. Günay:
    "Determination of Cutting Tool Geometries with High Precise Measurement Techniques and Investigation of Their Effects on Workpiece Surface Properties";
    Talk: 12th IMEKO TC10 Workshop on Technical Diagnostics, Florence; 06-06-2013 - 06-07-2013; in: "New Perspectives in Measurements, Tools and Techniques for Industrial Applications", IMEKO - International Measurement Confederation, University of Florence, (2013), ISBN: 978-88-903149-8-8; 106 - 111.

  74. Authors: M. Numan Durakbasa, E311 - AuM; Pinar Aksoy

    M.N. Durakbasa, P. Aksoy:
    "Characterization and Analysis of High-Precise Surface Structures by Contact and Non-Contact Methods";
    Talk: Proceedings of the 1st International Conference for Young Reasarchers and PhD. Students, Bratislava; 04-25-2007 - 04-26-2007; in: "ERIN 2007 PROCEEDINGS", (2007), ISBN: 978-80-227-2636-8; 61.

  75. Authors: M. Numan Durakbasa, E311 - AuM; Gökcen Bas, E311 - AuM

    M.N. Durakbasa, G. Bas:
    "Modeling Efficiency Improvement in Industry Through Implementation of Energy Management Systems";
    Talk: Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, Dubrovnik, Kroatien; 09-25-2011 - 09-29-2011; in: "Proceedings of the 6th Conference", (2011), ISBN: 978-953-7738-12-9; 1 - 7.

  76. Authors: M. Numan Durakbasa, E311 - AuM; Gökcen Bas, E311 - AuM

    M.N. Durakbasa, G. Bas:
    "Surface Roughness Investigation of the Cutting Edge Of The High Precision Cutting Tools Enabled By Micro and Nanometrological Measurements";
    Talk: XXVII. microCAD International Scientific Conference, Miskolc, Ungarn; 03-21-2013 - 03-22-2013; in: "Proceedings of the XXVII. microCAD International Scientific Conference", (2013), ISBN: 978-963-358-018-9; 5 pages.

    More information

  77. Authors: M. Numan Durakbasa, E311 - AuM; Gökcen Bas, E311 - AuM

    M.N. Durakbasa, G. Bas:
    "The Integration Of Energy And Environmental Management System To A Model Of Industrial Plant";
    Talk: XXV, microCAD International Scientific Conference, Miskolc, Ungarn; 03-31-2011 - 04-01-2011; in: "XXV, microCAD International Scientific Conference", ITTC Innovation and Technology Transfer Centre, ME.Tu-162 (2011), ISBN: 978-963-661-954-1; 27 - 32.

  78. Authors: M. Numan Durakbasa, E311 - AuM; Gökcen Bas, E311 - AuM; Jorge Martin Bauer, E311 - AuM

    M.N. Durakbasa, G. Bas, J.M. Bauer:
    "A Holistic And Integrated Strategy To Improve Energy Efficiency In Industry By Target-Setting Modeling";
    Talk: ELAEE 2013, Latin American Meeting on Energy Economics, Montevideo, Uruguay; 04-08-2013 - 04-09-2013; in: "Proceedings of the ELAEE 2013 Conference, 4th Latin American Meeting on Energy Economics", (2013), 5 pages.

    More information

  79. Authors: M. Numan Durakbasa, E311 - AuM; Gökcen Bas, E311 - AuM; Jorge Martin Bauer, E311 - AuM; Lukas Kräuter

    M.N. Durakbasa, G. Bas, J.M. Bauer, L. Kräuter:
    "Development of an advanced metrology and intelligent quality management as a strategic approach in manufacturing industry";
    Keynote Lecture: ISMQC - International Symposium on Measurement and Quality Control, Krakow-Kielce, Polen; 09-11-2013 - 09-13-2013; in: "Proceedings of the 11th International Symposium on Measurement and Quality Control", Osaka University, (2013), 4 pages.

    More information

  80. Authors: M. Numan Durakbasa, E311 - AuM; Gökcen Bas, E311 - AuM; Jorge Martin Bauer, E311 - AuM; G. Poszvek

    M.N. Durakbasa, G. Bas, J.M. Bauer, G. Poszvek:
    "Intelligent Design and Advanced Metrology as Strategic Approaches to Efficiency and Quality Improvement in Smart Manufacturing";
    Keynote Lecture: Total Quality Management-Advanced and Intelligent Approaches (TQM) 2013, Belgrad, Serbien (invited); 06-03-2013 - 06-07-2013; in: "The 7th International Working Conference "Total Quality Management - Advanced and Intelligent Approaches"", (2013), ISBN: 978-86-7083-791-1; Paper ID 17-22, 6 pages.

    More information

  81. Authors: M. Numan Durakbasa, E311 - AuM; Gökcen Bas, E311 - AuM; Pinar Demircioglu

    M.N. Durakbasa, G. Bas, P. Demircioglu:
    "A nanometrological process management model to assess the end milling tools in the machining industry";
    Talk: 13th International Conference on Tools ICT 2012, Miskolc, Ungarn; 03-27-2012 - 03-28-2012; in: "Proceedings of the 13th International Conference on Tools ICT 2012", (2012), ISBN: 978-963-9988-35-4; 271 - 276.

    More information

  82. Authors: M. Numan Durakbasa, E311 - AuM; Gökcen Bas, E311 - AuM; Erol Güclü, E311 - AuM; Wolfgang Pirker

    M.N. Durakbasa, G. Bas, E. Güclü, W. Pirker:
    "An Innovative Technique for Successful Clinical Dental Implantation by Means of Quality Control and Surface Characterization Analyze";
    Talk: XXVIII. microCAD International Multidisciplinary Scientific Conference, Miskolc, Ungarn; 04-10-2014 - 04-11-2014; in: "XXVIII. microCAD International Multidisciplinary Scientific Conference", (2014), 1 - 7.

    More information

  83. Authors: M. Numan Durakbasa, E311 - AuM; Gökcen Bas, E311 - AuM; Lukas Kräuter; G. Poszvek

    M.N. Durakbasa, G. Bas, L. Kräuter, G. Poszvek:
    "The Assessment of Industrial Manufacturing Systems Towards Advanced Operations by Means of Integrated Modeling Approach";
    Talk: International Business Information Management Association Conference (IBIMA), Wien, Österreich; 06-27-2013 - 06-28-2013; in: "Vision 2020: Innovation, Development Sustainability, and Economic Growth, Proceedings of the 21st International Business Information Management Association Conference (IBIMA", (2013), ISBN: 978-0-9860419-0-7; Paper ID 1418-1426, 9 pages.

    More information

  84. Authors: M. Numan Durakbasa, E311 - AuM; Gökcen Bas, E311 - AuM; Zehra Özkan

    M.N. Durakbasa, G. Bas, Z. Özkan:
    "A Proposal Of Methodology For The Strategy And Implementation Of Energy Management Within The Integrated Management Systems";
    Talk: 16th World Productivity Congress and European Productivity Conference, Antalya, Türkei; 11-02-2010 - 11-05-2010; in: "16th World Productivity Congress and European Productivity Conference", MPM National Productivity Centre of Türkiye - WCPS World Confederation of Productivity Science, (2010), 5 pages.

  85. Authors: M. Numan Durakbasa, E311 - AuM; Gökcen Bas, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Jorge Martin Bauer, E311 - AuM

    M.N. Durakbasa, G. Bas, P.H. Osanna, J.M. Bauer:
    "Sustainable Management Systems of Quality, Energy and Environment in Industry";
    Talk: 1st International Conference Quality and Innovation in Engineering and Management, Cluj-Napoca, RO; 03-17-2011 - 03-19-2011; in: "QIEM", U.T. Press, 1, Cluj - Napoca (2011), ISBN: 978-973-662-614-2; 67 - 70.

  86. Authors: M. Numan Durakbasa, E311 - AuM; Jorge Martin Bauer, E311 - AuM; Gökcen Bas, E311 - AuM

    M.N. Durakbasa, J.M. Bauer, G. Bas:
    "A Sophisticated Approach to Advanced Production Engineering - Integrated Management for Sustainable Development";
    Keynote Lecture: Proceedings of ICPR-AEM and QIEM 2014 Conference, Cluj-Napoca, Rumänien (invited); 07-01-2014 - 07-05-2014; in: "2014 INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH - REGIONAL CONFERENCE AFRICA, EUROPE AND THE MIDDLE EAST and 3rd INTERNATIONAL CONFERENCE ON QUALITY AND INNOVATION IN ENGINEERING AND MANAGEMENT", Technical University of Cluj- Napoca (2014), ISBN: 978-973-662-978-5; 5 pages.

    More information

  87. Authors: M. Numan Durakbasa, E311 - AuM; Jorge Martin Bauer, E311 - AuM; Gökcen Bas, E311 - AuM
    Other person involved: Sergej Hloch

    M.N. Durakbasa, J.M. Bauer, G. Bas:
    "Developments in High Precision Metrology for Advanced Manufacturing";
    Keynote Lecture: Manufacturing Engineering and Management, Presov, Slovak Republic (invited); 12-05-2012 - 12-07-2012; in: "Proceedings of 2nd International Conference on MANUFACTURING ENGINEERING & MANAGEMENT 2012", S. Hloch et al. (ed.); FVT TU in Kosice with a seat in Presov, STEVEPRESS, Ltd., Presov, Slovak Republic (2012), 978‐80‐553‐1216‐3; 210 - 215.

    More information

  88. Authors: M. Numan Durakbasa, E311 - AuM; E. Beken

    M.N. Durakbasa, E. Beken:
    "A Proposed Implementation Process For Total-Quality-Management With Integration Of Sustainability Elements Of The International Standards Iso 14001 And Iso 50001";
    Talk: Proceedings of ICPR-AEM and QIEM 2014 Conference, Cluj-Napoca, Rumänien; 07-01-2014 - 07-05-2014; in: "2014 INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH - REGIONAL CONFERENCE AFRICA, EUROPE AND THE MIDDLE EAST and 3rd INTERNATIONAL CONFERENCE ON QUALITY AND INNOVATION IN ENGINEERING AND MANAGEMENT", Technical University of Cluj- Napoca (2014), ISBN: 978-973-662-978-5; 6 pages.

    More information

  89. Authors: M. Numan Durakbasa, E311 - AuM; Ismail Bogrekci; Pinar Demircioglu; Gökcen Bas, E311 - AuM; Asli Günay

    M.N. Durakbasa, I. Bogrekci, P. Demircioglu, G. Bas, A. Günay:
    "Characterization Of The Surface Roughness By Precision Measurements And Image Processing On Machined Metal Surfaces Of Milling Cutters";
    Talk: Metrology in Production Engineering, Warschau - Pultusk, PL; 09-12-2011 - 09-14-2011; in: "Metrology in Production Engineering", (2011), 52 - 57.

  90. Authors: M. Numan Durakbasa, E311 - AuM; Ilknur Cavusoglu

    M.N. Durakbasa, I. Cavusoglu:
    "Product and Process Improvement for Automative Suppliers in the Modern Quality Management Systems";
    Talk: Proceedings 11th International Symposium on QFD, Kusadasi; 09-26-2005 - 09-30-2005; in: "Proceedings 11th International Symposium on Quality Function Deployment", (2005), 129 - 139.

  91. Authors: M. Numan Durakbasa, E311 - AuM; Ilknur Cavusoglu; Peter Herbert Osanna, E311 - AuM

    M.N. Durakbasa, I. Cavusoglu, P.H. Osanna:
    "Six Sigma: Quality Approaches in the Defect-free Production systems - Altı Sigma: Üretim Proseslerinde Neredeyse Hatasız Üretimin Gerçekleştirildiği Kalite Girişimleri";
    Talk: II Ulusal Kalite Fonksiyon Göcerimi Sempozyumu, Izmir; 03-18-2008 - 03-20-2008; in: "Kalite Fonksiyon Göcerimi - Quality Function Deployment", (2008), 10 pages.

  92. Authors: M. Numan Durakbasa, E311 - AuM; Pinar Demircioglu; Gökcen Bas, E311 - AuM

    M.N. Durakbasa, P. Demircioglu, G. Bas:
    "High-Accuracy Measurement And Evaluation Of The Surface Structures Machined In Micro/nano Scale By Tactile And 3d Optical Systems";
    Keynote Lecture: 10th International Scientific Conference "Coordinate Measuring Technique CMT", Bielsko Biala (invited); 04-23-2012 - 04-25-2012; in: "10th International Scientific Conference "Coordinate Measuring Technique CMT"", Bielsko Biala, 1 (2012), 12 pages.

  93. Authors: M. Numan Durakbasa, E311 - AuM; Pinar Demircioglu; Gökcen Bas, E311 - AuM; Wolfgang Pirker

    M.N. Durakbasa, P. Demircioglu, G. Bas, W. Pirker:
    "Micro-examination of Dental Samples to Enable the Quality Characteristics Required by the Clinical Experience using Biomedical Metrology";
    Talk: XXVI. microCAD International Scientific Conference, Miskolc, Hungary; 03-29-2012 - 03-30-2012; in: "The Publications of the XXVI. microCAD", (2012), ISBN: 978-963-661-773-8; 7 pages.

    More information

  94. Authors: M. Numan Durakbasa, E311 - AuM; Pinar Demircioglu; Mehmet Cakmakci; Adriana Hornikova, E311 - AuM

    M.N. Durakbasa, P. Demircioglu, M. Cakmakci, A. Hornikova:
    "Nanometrology, Evaluation Techniques and Quality Control for High Accuracy Surface Measurement";
    Talk: 6th Nanoscience and Nanotechnology Conference, Izmir; 06-15-2010 - 06-18-2010; in: "Nano Tr - Vi", Izmir Institute of Technology - IZTECH, (2010), 154.

  95. Authors: M. Numan Durakbasa, E311 - AuM; Gebremeskel Kahsay; Peter Herbert Osanna, E311 - AuM
    Other person involved: Stanislaw Adamczak

    M.N. Durakbasa, G. Kahsay, P.H. Osanna:
    "Analysis of Conventionally Machined Surfaces Using Contact Stylus and Optical Measurement Systems";
    Talk: Proceedings ICPM 2007 - IV. International Congress on Precision Machining, Kielce, PL; 09-25-2007 - 09-27-2007; in: "ICPM 2007", S. Adamczak et al. (ed.); Kielce University of Technology, (2007), ISBN: 978-83-88906-91-6; 119 - 123.

  96. Authors: M. Numan Durakbasa, E311 - AuM; Leisan Mukhametzianova; Gökcen Bas, E311 - AuM; Erol Güclü, E311 - AuM

    M.N. Durakbasa, L. Mukhametzianova, G. Bas, E. Güclü:
    "The Role of MMS in an Integrated Management for Improving Production Efficiency and Quality. M.N. Durakbasa";
    Talk: International Business Information Management Association Conference (IBIMA), Wien; 06-27-2013 - 06-28-2013; in: "Vision 2020: Innovation, Development Sustainability, and Economic Growth, Proceedings of the 21st International Business Information Management Association Conference (IBIMA)", (2013), ISBN: 978-0-9860419-0-7; Paper ID 1385-1393, 9 pages.

    More information

  97. Authors: M. Numan Durakbasa, E311 - AuM; Anil Nomak Akdogan

    M.N. Durakbasa, N. Nomak Akdogan:
    "Ölcme Belirsizliginin Süreclere olan Etkileri ve Ölcme Belirsizliginin Degerlendirilmesi (Influences and Evaluation of Measurement Uncertainty on Manufacturing Processes)";
    Talk: VI. Ulusal Ölcümbilim Kongresi, Eskisehir, TR; 11-17-2005 - 11-18-2005; in: "VI. ÖLCÜMBILIM KONGRESI", MMO, E/2005/394 (2005), ISBN: 975-395-976-1; 111 - 115.

  98. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM
    Other person involved: Emil Tokarz

    M.N. Durakbasa, P.H. Osanna:
    "Intelligent supervision of coordinate measuring machines and the estimation of the uncertainty of measurements with CMMS on the basis of ISO standards";
    Keynote Lecture: VIIth International Scientific Conference Coordinate Measuring Technique, Bielsko Biala, PL; 04-03-2006 - 04-05-2006; in: "COORDINATE MEASURING TECHNIQUE", e. Tokarz et al. (ed.); Prasa Beskidzka, 7/22/Bielsko Biala (2006), ISSN: 1644-0269; 45 - 54.

  99. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM
    Other person involved: Vidosav D. Majstorovic

    M.N. Durakbasa, P.H. Osanna:
    "Intelligent Tolerancing And Advanced Metrology To Support Total Quality Management And Modern Industrial Fabrication";
    Keynote Lecture: The Sixth International Working Conference, Belgrade, Serbia (invited); 06-06-2011 - 06-10-2011; in: "Total Quality Management - Advanced and Intelligent Approaches", V. Majstorovic (ed.); COBISS.SR-ID 183755276, Belgrade, SERBIA (2011), ISBN: 978-86-7083-727-0; 29 - 33.

  100. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM

    M.N. Durakbasa, P.H. Osanna, A. Afjehi-Sadat et al.:
    "Surface Assessment Related to Biomedicine - Possibilities, Opportunities and Future Developments";
    Talk: 9th International Conference on Metrology and Properties of Engineering Surfaces, Halmstad; 09-10-2004 - 09-11-2004; in: "Metrology and Properties of Engineering Surfaces", Halmstad University, (2004), ISBN: 91-631-5455-2; 271 pages.

  101. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Pinar Aksoy; A. J. Bauer; Lukas Kräuter

    M.N. Durakbasa, P.H. Osanna, P. Aksoy, A. Bauer, L. Kräuter:
    "Comparision of Contact and Optical Non-Contact Methods for the Analysis and Characterization of Surfaces of Precise Workpieces";
    Talk: VIIIth International Science Conference Coordinate Measuring Technique, Bielsko-Biala - Ustron / PL; 03-31-2008 - 04-02-2008; in: "Coordinate Measuring Technique Problems and Implementations", (2008), ISBN: 978-83-60714-40-9; 303 - 314.

  102. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Pinar Aksoy; Lukas Kräuter
    Other person involved: Pawel Pawlus

    M.N. Durakbasa, P.H. Osanna, P. Aksoy, L. Kräuter:
    "Contact and Non-contact Measurement and Analysis of the Surface of High Precision Workpieces";
    Talk: 12th International Conference on Metrology and Properties of Engineering Surfaces, Rzeszow; 07-08-2009 - 07-10-2009; in: "Metrology and Properties of Engineering Surfaces", P. Pawlus et al. (ed.); Rzeszow University of Technology, (2009), ISBN: 978-83-7199-545-3; 111 - 116.

  103. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Gökcen Bas, E311 - AuM
    Other person involved: Vidosav D. Majstorovic

    M.N. Durakbasa, P.H. Osanna, G. Bas:
    "Advanced Management Systems for Quality, Energy and Environment for Efficiency Enhancement of Modern Manufacturing Industries";
    Keynote Lecture: International Convention On Quality 2012 With The Motto Quality For European And World Integrations, Belgrade (invited); 06-05-2012 - 06-07-2012; in: "International Convention On Quality 2012", V. Majstorovic (ed.); UASQ United Association of Serbia for Quality, 1 (2012), ISBN: 978-86903197-9-4; Paper ID rad03, 8 pages.

  104. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Liviu Crisan; Jorge Martin Bauer, E311 - AuM; Lukas Kräuter

    M.N. Durakbasa, P.H. Osanna, L. Crisan, J.M. Bauer, L. Kräuter:
    "Intelligent Tolerancing and Coordinate Metrology as Basis for Competetive Global and Accurate Economic Industrial Manufacturing";
    Talk: 5. KOBI'ler ve Verimlilik Kongresi - 5th Congress on SMEs and Efficiency, Istanbul; 11-25-2008 - 11-26-2008; in: "Global Dynamics and SMEs", (2008).

  105. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Liviu Crisan; Lukas Kräuter

    M.N. Durakbasa, P.H. Osanna, L. Crisan, L. Kräuter:
    "Competetive Global And Accurate Economic Industrial Production On Basis Of Intelligent Tolerancing And Coordinate Metrology";
    Talk: XXIII. microCAD International Scientific Conference, Miskolc, Ungarn; 03-19-2009 - 03-20-2009; in: "Production Engineering and Manufacturing Systems", ITTC Innovation and Technology Transfer Centre, ME.Tu-116 (2009), ISBN: 978-963-661-878-0; 263 - 268.

  106. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Pinar Demircioglu

    M.N. Durakbasa, P.H. Osanna, P. Demircioglu:
    "The Factors Affecting Surface Roughness Measurements of the Machined Flat and Spherical Surface Structures - The Geometry and the Precision of the Surface";
    Talk: ISMQC - International Symposium on Measurement and Quality Control, Osaka - Japan; 09-05-2010 - 09-09-2010; in: "ISMQC 2010", Osaka University, (2010), ISBN: 978-49905119-1-3; 1 - 4.

  107. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Pinar Demircioglu; Ismail Bogrekci

    M.N. Durakbasa, P.H. Osanna, P. Demircioglu, I. Bogrekci:
    "Parameters and measurands in precision nanometrology";
    Talk: 10th International Symposium on Measurement Technology and Intelligent Instruments, KAIST, Daejeon, Korea; 06-29-2011 - 07-02-2011; in: "ISMTII 2011", Vol. X , No. X, A5-5 (2011), 1 - 6.

  108. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Pinar Demircioglu; Liviu Crisan

    M.N. Durakbasa, P.H. Osanna, P. Demircioglu, L. Crisan:
    "Surface Measurement And Evaluation Methods Of High Precision Technical Structures";
    Talk: XXIV. microCAD International Scientific Conference, Miskolc; 03-18-2010 - 03-20-2010; in: "microCAD", ITTC Innovation and Technology Transfer Centre, N (2010), ISBN: 978-963-661-918-3; 193 - 198.

  109. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Adriana Hornikova, E311 - AuM; Mehmet Cakmakci; Gökcen Bas, E311 - AuM; Pinar Demircioglu

    M.N. Durakbasa, P.H. Osanna, A. Hornikova, M. Cakmakci, G. Bas, P. Demircioglu:
    "Production Engineering On The Basis Of Precision Metrology And Intelligent Tolerancing";
    Keynote Lecture: Metrology in Production Engineering, Warschau - Pultusk, PL (invited); 09-12-2011 - 09-14-2011; in: "Metrology in Production Engineering", (2011), 46 - 51.

  110. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Lukas Kräuter
    Other person involved: Vidosav D. Majstorovic

    M.N. Durakbasa, P.H. Osanna, L. Kräuter:
    "Development Tendencies in Precision Engineering and Industrial Nanometrology";
    Keynote Lecture: International Journal - Yusq-United Association Of Serbia For Quality, Belgrad; 05-31-2010 - 06-03-2010; in: "Total Quality Management & Excellence", V. Majstorovic (ed.); UASQ - United Association of Serbia for Quality, 38, UDK 658.5, Belgrade, Serbia (2010), ISSN: 1452-0680; 7 - 12.

  111. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Lukas Kräuter

    M.N. Durakbasa, P.H. Osanna, L. Kräuter:
    "Modern Industrial Manufacturing And Fabrication To Achieve High Accuracy And High Economy";
    Talk: Xxxii Conference On Production Engineering, Novi Sad; 09-18-2008 - 09-20-2008; in: "Proceedings 32. Conference on Production Engineering of Serbia with International Participants", Faculty of Technical Sciences, (2008), ISBN: 978-86-7892-131-5; 591 - 594.

  112. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Lukas Kräuter
    Other persons involved: Constantin Oprean; Norbert Grünwald; Claudiu Kifor

    M.N. Durakbasa, P.H. Osanna, L. Kräuter:
    "Research and Education in Engineering and Business with Special Consideration on Geometrical Product Specifications and Verification - GPS";
    Keynote Lecture: Proceedings of Balkan Region Conference on Engineering and Business Education & International Conference on Engineering and Business Education, Sibiu, Romania (invited); 10-15-2009 - 10-17-2009; in: "Balkan Region Conference on Engineering and Business Education & International Conference on Engineering and Business Education", C. Oprean, N. Grünwald, C. Kifor (ed.); Lucian Blaga University of Sibiu, I/Sibiu (2009), ISBN: 978-973-739-848-2; 14 - 18.

  113. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Lukas Kräuter; Jorge Martin Bauer, E311 - AuM

    M.N. Durakbasa, P.H. Osanna, L. Kräuter, J.M. Bauer:
    "The Improvement of Product and Process Quality in the Industry of the 21st Century, by Application of Nanotechnology for Every-Day-Life and for Bio-Medicine";
    Talk: 7mo. Simposio INTERNACIONAL, La Habana, Cuba; 05-27-2008 - 05-29-2008; in: "Metrologia 2008", (2008), 978-959-282-073-7.

  114. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Anil Nomak Akdogan

    M.N. Durakbasa, P.H. Osanna, N. Nomak Akdogan:
    "Supervision And Confirmation Of Complex Measurement Systems By Using Of Intelligent Technologies";
    Talk: XVII IMEKO WORLD CONGRESS Metrology in the 3rd Millenium, Cavtat; 06-22-2003 - 06-27-2003; in: "Metrology in the 3rd Millennium", (2003), Paper ID TC14 -005, 4 pages.

  115. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Anil Nomak Akdogan; Jorge Martin Bauer, E311 - AuM; Lukas Kräuter
    Other person involved: Georgi M. Dimirovski

    M.N. Durakbasa, P.H. Osanna, N. Nomak Akdogan, J.M. Bauer, L. Kräuter:
    "The Influence of Ecology and TQM in European Industrial Production under the Pre-supposition of Intelligent flexible Dissassembly and Recycling of Used Products";
    Keynote Lecture: 5th International IFAC Wokshop DECOM-TT 2007, Izmir, TR; 05-17-2007 - 05-20-2007; in: "A Proceedings Volume from the 5th IFAC Workshop DECOM-TT 2007", G. Dimirovski (ed.); DEU Press and TOK, Izmir (2007), ISBN: 978-975-01864-1-7; 257 - 260.

  116. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Binnur Sagbas; Adriana Hornikova, E311 - AuM

    M.N. Durakbasa, P.H. Osanna, B. Sagbas, A. Hornikova:
    "High Precision Production Metrology for Quality Improvement in Biomedical Applications";
    Talk: 8th International Conference on Measurement, Smolenice, Slovakia; 04-27-2011 - 04-30-2011; in: "Measurement 2011", VEDA, Bratislava, Slovakia (2011), ISBN: 978-80-969-672-4-7; 135 - 140.

  117. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Ken J. Stout
    Other person involved: Günes Gencyilmaz

    M.N. Durakbasa, P.H. Osanna, K.J. Stout:
    "Alternative Ideas for Quality Assurance Based on Function Dependence";
    Talk: Proceedings KOBI' 07, Istanbul, TR; 12-07-2007 - 12-08-2007; in: "4th Congress of the SMEs and Efficiencies - 4. KOBI'ler ve Verimlilik Kongresi", G. Gencyilmaz et al. (ed.); Golden Media, 70 (2007), ISBN: 978-975-6957-71-4; 623 - 629.

  118. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Mehmet Emin Yurci; Pinar Aksoy

    M.N. Durakbasa, P.H. Osanna, M.E. Yurci, P. Aksoy:
    "Contact And Contactless Investigations Of Manufactured High-Precise Surface Structures";
    Talk: IMEKO XIX World Congress, Lisbon; 09-06-2009 - 09-11-2009; in: "Fundamental and Applied Metrology", (2009), ISBN: 978-963-88410-0-1; Paper ID 680, 4 pages.

  119. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Mehmet Emin Yurci; Anil Nomak Akdogan

    M.N. Durakbasa, P.H. Osanna, M.E. Yurci, N. Nomak Akdogan:
    "High Precision Measurement and Evaluation of the Fine Mould Surface Structures";
    Talk: PROCEEDINGS OF ISMTII 2007, Sendai, Japan; 09-24-2007 - 09-27-2007; in: "ISMTII 2007", TOHOKU UNIV SENDAI, (2007), 371 - 374.

  120. Authors: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Mehmet Emin Yurci; Anil Nomak Akdogan
    Other person involved: Illes Dudas

    M.N. Durakbasa, P.H. Osanna, M.E. Yurci, N. Nomak Akdogan:
    "Surface Treatment, Modification, Precision Measurement and Raughness Evaluation of Fine Moulded Surface Structures";
    Talk: Proceedings of the 12th International Conference on Tools, Miskolc, Hungary; 09-06-2007 - 09-08-2007; in: "International Conference of Tools - ICT 2007", I. Dudas et al. (ed.); (2007), ISSN: 1215-0851; 21 - 26.

  121. Authors: M. Numan Durakbasa, E311 - AuM; Wolfgang Pirker; Peter Herbert Osanna, E311 - AuM; Pinar Demircioglu; Gökcen Bas, E311 - AuM; Burcu Gültekin, E311 - AuM

    M.N. Durakbasa, W. Pirker, P.H. Osanna, P. Demircioglu, G. Bas, B. Gültekin:
    "Application Of Advanced Production Metrology For Quality Improvements In Biomedical Engineering - Analysis And Evaluation Of Surface Structures Of Dental Implants";
    Talk: 14 Joint International IMEKO TC1+TC7 TC13 th + Symposium, Jena, Germany; 08-31-2011 - 09-02-2011; in: "Intelligent Quality Measurements - Theory, Education and Training", (2011), Paper ID urn:nbn:de:gbv:ilm1-2011imeko-085:3, 5 pages.

  122. Authors: M. Numan Durakbasa, E311 - AuM; Ken J. Stout; Peter Herbert Osanna, E311 - AuM; Mehmet Emin Yurci
    Other persons involved: Sergej Hloch; Zuzana Urbanova; Josef Dobransky; Imrich Orlovsky

    M.N. Durakbasa, K.J. Stout, P.H. Osanna, M.E. Yurci:
    "Function Dependent Quality Assurance in Modern Production Engineering";
    Keynote Lecture: TSO 07 Proceedings, Presov; 11-21-2007 - 11-23-2007; in: "TSO Technology System Opretaion 2007", S. Hloch, Z. Urbanova, J. Dobransky, I. Orlovsky (ed.); FVT TU, Kosice (2007), ISBN: 978-80-8073-900-3; 7 - 10.

  123. Authors: M. Numan Durakbasa, E311 - AuM; Mehmet Emin Yurci; Peter Herbert Osanna, E311 - AuM; Anil Nomak Akdogan
    Other person involved: Csaba Gyenge

    M.N. Durakbasa, M.E. Yurci, P.H. Osanna, N. Nomak Akdogan:
    "The Structure of Fine Mould Surfaces and Their Accurate Mesurement and Evaluation";
    Talk: Annals of MTeM for 2007 and Proceedings of the 8th Internatinal Conference in Manufacturing, Cluj-Napoca, RO; 10-04-2007 - 10-05-2007; in: "MTeM 2007", C. Gyenge (ed.); (2007), ISBN: 973-9087-83-3; 481 - 483.

  124. Authors: Mustafa Erol; Metin Yurddaskal; Serdar Yildirim; Omer Mermer; Gökcen Bas, E311 - AuM; Mehmet Cakmakci; M. Numan Durakbasa, E311 - AuM; Erdal Celik

    M. Erol, M. Yurddaskal, S. Yildirim, O. Mermer, G. Bas, M. Cakmakci, M.N. Durakbasa, E. Celik:
    "Nanometric measurement of the pre nano scale tio2 powders via flame spray pyrolysis: synthesis, properties and photocatalytical decomposition of methylen blue";
    Talk: IMEKO XX World Congress International Measurement Confederation, Busan, Korea; 09-09-2012 - 09-14-2012; in: "IMEKO XX World Congress International Measurement Confederatio", (2012), ISBN: 978-89-950000-5-2; 6 pages.

    More information

  125. Authors: Andreas Fritsche, E311 - FET; Fritz Bleicher, E311 - FET

    A. Fritsche, F. Bleicher:
    "Comparison of two state of the art grinding cooling technologies";
    Poster: 31st Danubia-Adria Symposium on Advances in Experimental Mechanics, Kempten (invited); 09-24-2014 - 09-27-2014; in: "31st Danubia-Adria Symposium on Advances in Experimental Mechanics", VDI Verein Deutscher Ingenieure e.V., Düsseldorf (2014), ISBN: 978-3-00-046740-0; 50 - 51.

  126. Authors: Martin Fuchs, E311; Christoph Habersohn, E311 - FET; Yakup Kalkan; Christoph Lechner, E311 - FET; Fritz Bleicher, E311 - FET

    M. Fuchs, Ch. Habersohn, Y. Kalkan, C. Lechner, F. Bleicher:
    "Metrological Investigation of an actuator device for vibration-assisted turning";
    Poster: 31st Danubia-Adria Symposium on Advances in Experimental Mechanics, Kempten (invited); 09-24-2014 - 09-27-2014; in: "31st Danubia-Adria Symposium on Advances in Experimental Mechanics", VDI Verein Deutscher Ingenieure e.V., Düsseldorf, (2014), ISBN: 978-3-00-046740-0; 98 - 99.

  127. Authors: Bernhard Geringer, E315; Josef Graf, E315; Dominikus Klawatsch, E315; Hans-Peter Lenz, E315; Gerhard Liedl, E311 - LLU; Dieter Schuöcker, E311 - LLU; Walter F. Piock; Markus Jetzinger, E315; Paul Kapus

    B. Geringer, J. Graf, D. Klawatsch, H.-P. Lenz, G. Liedl, D. Schuöcker, W.F. Piock, M. Jetzinger, P. Kapus:
    "Direkteinspritzender Ottomotor und Laserzündung";
    Talk: 5. Dresdner Motorenkolloquium, Dresden (invited); 06-05-2003 - 06-06-2003; in: "5. Dresdner Motorenkolloquium ", (2003), ISSN: 1433-4135; 15 - 23.

    More information

  128. Authors: Bernhard Geringer, E315; Josef Graf, E315; Dominikus Klawatsch, E315; Hans-Peter Lenz, E315; Gerhard Liedl, E311 - LLU; Dieter Schuöcker, E311 - LLU; Walter F. Piock; Markus Jetzinger, E315; Paul Kapus
    Other person involved: Hans-Peter Lenz, E315

    B. Geringer, J. Graf, D. Klawatsch, H.-P. Lenz, G. Liedl, D. Schuöcker, W.F. Piock, M. Jetzinger, P. Kapus:
    "Laserinduzierte Zündung an einem Otto-DI-Brennverfahren der zweiten Generation";
    Talk: 24. Internationales Wiener Motorensymposium, Wien (invited); 05-15-2003 - 05-16-2003; in: "24. Internationales Wiener Motorensymposium 15.- 16. Mai 2003", H.-P. Lenz (ed.); VDI Verlag GmbH, Düsseldorf (2003), ISBN: 3-18-353912-8; 87 - 109.

    More information

  129. Authors: Stefan Gössinger, E302 - 2; Christian Bauer, E302 - 2; Christoph Lechner, E311 - FET; Fritz Bleicher, E311 - FET

    S. Gössinger, C. Bauer, C. Lechner, F. Bleicher:
    "Using Machine Hammer Peening to Realize Defined Surface Structures in Order to Reduce Friction in Turbulent Fluid Flows";
    Talk: 17th International Conference on Hydropower Plants, Laxenburg; 11-21-2012 - 11-23-2012; in: "Pumped storage in the context of renewable energy supply", (2012), ISBN: 978-3-9501937-8-7; 379 - 388.

  130. Authors: Manfred Gronalt; Branko Katalinic, E311 - IMS; M. Schmid

    M. Gronalt, B. Katalinic, M. Schmid:
    "Engpaßanalyse eines flexiblen Fertigungssystems mit Hilfe von Computersimulation";
    Talk: 2nd International Symposium Danubia-Adria Association for Automation and Metrology, Strbske Pleso, Slovakia; 12-09-1991 - 12-11-1991; in: "Proc. of 2nd International Symposium Danubia-Adria Association for Automation and Metrology", House of Technology, Bratislava, (1991), ISBN: 80-233-0225-6; 118 - 119.

  131. Authors: Asli Gunay; Sinan Fank; T. Gulmez; M. Numan Durakbasa, E311 - AuM

    A. Gunay, S. Fank, T. Gulmez, M.N. Durakbasa:
    "Calculation of measurement uncertainty for plastic (abs) material in flexural testing";
    Poster: IMEKO XX World Congress International Measurement Confederation, Busan, Korea; 09-09-2012 - 09-14-2012; in: "Proceedings of XX IMEKO World Congress International Measurement Confederation", (2012), ISBN: 978-89-950000-5-2; 4 pages.

    More information

  132. Authors: Christoph Habersohn, E311 - FET; Falko Puschitz, E311 - FET; Fritz Bleicher, E311 - FET

    Ch. Habersohn, F. Puschitz, F. Bleicher:
    "Development Of A Virtual Model For An Over-Determined Parallel Kinematics Structure";
    Poster: 27th Symposium on advances in experimental machanics, Wroclaw; 09-22-2010 - 09-25-2010; in: "27th Symposium on advances in experimental machanics", (2010), ISBN: 978-83-87982-59-1; 69 - 70.

  133. Authors: Edmond Hajrizi; S Shabani; Branko Katalinic, E311 - IMS

    E. Hajrizi, S Shabani, B. Katalinic:
    "Computer Based Optimal Design of Asynchronous Devices";
    Talk: 8th International DAAAm Symposium, Dubrovnik; 10-23-1997 - 10-25-1997; in: "Proceedings of 8th International DAAAm Symposium", (1997), 107 - 108.

  134. Authors: Bernhard Heinzl, E183 - 1; Wolfgang Kastner, E183 - 1; Ines Leobner, E302 - 1; Fabian Dür, E311 - FET; Fritz Bleicher, E311 - FET; Iva Kovacic, E234 - 2

    B. Heinzl, W. Kastner, I. Leobner, F. Dür, F. Bleicher, I. Kovacic:
    "Using coupled simulation for planning of energy efficient production facilities";
    Talk: Workshop on Modeling and Simulation of Cyber-Physical Energy Systems (MSCPES), Berlin, Germany; 04-14-2014; in: "Proceedings Workshop on Modeling and Simulation of Cyber-Physical Energy Systems (MSCPES)", (2014), 1 - 6.

  135. Authors: Bernhard Heinzl, E183 - 1; Michael Landsiedl; Nikolas Popper, E101 - 6; Alexandros-Athanassi Dimitriou, E311; Fabian Dür, E311 - FET; Fritz Bleicher, E311 - FET; Christian Reinisch, E183 - 1; Felix Breitenecker, E101 - 6

    B. Heinzl, M. Landsiedl, N. Popper, A. Dimitriou, F. Dür, F. Bleicher, C. Reinisch, F. Breitenecker:
    "Object-oriented Multi-domain Modelling of Machine Tools: A Case Study";
    Talk: European Modeling and Simulation Symposium, Wien; 09-19-2012 - 09-21-2012; in: "Proceedings of the European Modeling and Simulation Symposium, 2012", (2012), ISBN: 978-88-97999-01-0; 471 - 476.

    More information

  136. Authors: Bernhard Heinzl, E101 - 6; Matthias Rößler, E101 - 6; Niki Popper; Michael Landsiedl; Christoph Dorn, E311 - FET; Stefan Brandstetter, E311; Fritz Bleicher, E311 - FET; Alexandros-Athanassi Dimitriou, E311

    B. Heinzl, M. Rößler, N. Popper, M. Landsiedl, C. Dorn, S. Brandstetter, F. Bleicher, A. Dimitriou:
    "Studies on Multi-Domain Modelling and Thermal Coupling of a Machine Tool";
    Talk: ASIM 2011, Winterthur, Schweiz; 09-07-2011 - 09-09-2011; in: "Tagungsband Abstracts und Fullpapers", ZHAW School of Engineering, (2011), ISBN: 978-3-905745-44-3.

    More information

  137. Authors: Bernhard Heinzl, E183 - 1; Matthias Rößler, E183 - 1; Nikolas Popper, E101 - 6; Ines Leobner, E302 - 1; Karl Ponweiser, E302 - 1; Wolfgang Kastner, E183 - 1; Fabian Dür, E311 - FET; Fritz Bleicher, E311 - FET; Felix Breitenecker, E101 - 6

    B. Heinzl, M. Rößler, N. Popper, I. Leobner, K. Ponweiser, W. Kastner, F. Dür, F. Bleicher, F. Breitenecker:
    "Interdisciplinary Strategies for Simulation-Based Optimization of Energy Efficiency in Production Facilities";
    Talk: Computer Modelling and Simulation (UKSim), Cambridge, United Kingdom; 04-10-2013 - 04-12-2013; in: "Computer Modelling and Simulation (UKSim)", (2013), 304 - 309.

    More information

  138. Authors: Norman Herzig, TU Chemnitz; Fritz Bleicher, E311 - FET; Lothar W. Meyer; Thorsten Halle

    N. Herzig, F. Bleicher, L. Meyer, T. Halle:
    "Zusammenhänge zwischen werkstoffbedingten Skalierungseffekten und der spezifischen Spankraft";
    Talk: DFG Schwerpunktsprogramm 1138 Modellierung von Größeneinflüssen bei Fertigungsprozessen, Chemnitz (invited); 05-08-2008 - 05-09-2008; in: "Modellierung von Größeneinflüssen bei Fertigungsprozessen", Eigenverlag, Chemnitz, (2008), ISSN: 1860-8698.

    More information

  139. Authors: Norman Herzig, TU Chemnitz; Fritz Bleicher, E311 - FET; Falko Puschitz, E311 - FET; Christoph Dorn, E311 - FET

    N. Herzig, F. Bleicher, F. Puschitz, C. Dorn et al.:
    "Collective Research for High Performance Manufacturing";
    Talk: 15th International Working Seminar on Production Economics, Innsbruck; 03-03-2008 - 03-07-2008; in: "15th International Working Seminar on Production Economic", (2008), 163 - 172.

    More information

  140. Authors: Norman Herzig, TU Chemnitz; Lothar W. Meyer; Thorsten Halle; Fritz Bleicher, E311 - FET; Falko Puschitz, E311 - FET; Christoph Dorn, E311 - FET

    N. Herzig, L. Meyer, T. Halle, F. Bleicher, F. Puschitz, C. Dorn:
    "A material based approach of modeling specific cutting force during machining operations including scaling effects";
    Talk: 12th CIRP Conference on Modelling of Machining Operations, San Sebastian; 05-07-2009 - 05-08-2009; in: "Conference on Modelling of Machining Operations", Band 1 (2009), ISBN: 978-84-608-0865-7; 229 - 236.

    More information

  141. Authors: Adriana Hornikova, E311 - AuM; Gökcen Bas, E311 - AuM; Binnur Sagbas; M. Numan Durakbasa, E311 - AuM
    Other persons involved: Sorin Popescu; Stelian Brad; Daniela Popescu

    A. Hornikova, G. Bas, B. Sagbas, M.N. Durakbasa:
    "Contributing With Design Of Experiment Theory To Quality";
    Talk: 1st International Conference Quality and Innovation in Engineering and Management, Cluj-Napoca, RO; 03-17-2011 - 03-19-2011; in: "QIEM", S. Popescu, S. Brad, D. Popescu (ed.); U.T. Press, 1, Cluj - Napoca (2011), ISBN: 978-973-662-614-2; 95 - 100.

  142. Authors: Adriana Hornikova, E311 - AuM; M. Numan Durakbasa, E311 - AuM

    A. Hornikova, M.N. Durakbasa:
    "Monograph about Data Mining/ Monograph d'Exploration de données";
    Talk: CAFMET 2010, Cairo, EGYPT; 04-18-2010 - 04-23-2010; in: "CAFMET 2010", CAFMET, (2010), Paper ID S6-3 PA-101, 8 pages.

  143. Authors: Adriana Hornikova, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Erol Güclü, E311 - AuM; Gökcen Bas, E311 - AuM

    A. Hornikova, M.N. Durakbasa, E. Güclü, G. Bas:
    "Data Mining - Novel Statistical Method";
    Talk: 8th International Conference on Measurement, Smolenice, Slovakia; 04-27-2011 - 04-30-2011; in: "Measurement 2011", VEDA, Bratislava, Slovakia (2011), ISBN: 978-80-969-672-4-7; 12 - 15.

  144. Authors: Adriana Hornikova, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM

    A. Hornikova, M.N. Durakbasa, P.H. Osanna:
    "Biomedical Application of Form Measurement and Coordinate Metrology";
    Talk: 2011 IEEE International Symposium on Medical Measurements and Applications (MeMaA 2011), Bari, ITALY; 05-30-2011 - 05-31-2011; in: "2011 IEEE International Symposium on Medical Measurements and Applications (MeMeA 2011) Proceedings", IEEE, CFP11MEA-CDR (2011), ISBN: 978-1-4244-9337-1; 5 pages.

  145. Authors: Gerald Humenberger, E311 - LLU; Gerhard Liedl, E311 - LLU; Stefan Heidlmayr, E311 - LLU

    G. Humenberger, G. Liedl, S. Heidlmayr:
    "Measurement of the Emitted Thermal Radiation During CO2-Laser Cutting";
    Talk: MOTSP 2014, Bol, Kroatien; 06-11-2014 - 06-13-2014; in: "MOTSP 2014 Conference Proceedings", Croatian Association for PLM, (2014), ISSN: 1848-9591; 8 pages.

    More information

  146. Authors: Gebremeskel Kahsay; Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM

    G. Kahsay, P.H. Osanna, M.N. Durakbasa:
    "EMPIRICAL INVESTIGATION OF TOTAL QUALITY MANAGEMENT (TQM) IN MEDIUM AND LARGE SCALE MANUFACTURING INDUSTRIES";
    Talk: Proceedings 11th International scientific conference - SI 2007, Bratislava, SK; 11-29-2007 - 11-30-2007; in: "Mechanical Engineering 2007", (2007), ISBN: 978-80-227-2768-6; 8 pages.

  147. Authors: Gebremeskel Kahsay; Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM

    G. Kahsay, P.H. Osanna, M.N. Durakbasa:
    "Six Sigma: A Virtually Defect Free Quality Initiative";
    Talk: Tagungsband TOP 2007, Senec, SK; 06-26-2007 - 06-28-2007; in: "TOP 2007", STU - Publishing House of Slvak University of Technology, (2007), ISBN: 978-80-227-2693-1; 143 - 152.

  148. Authors: Martin Kaltenbrunner, E311 - LLU; Gerhard Liedl, E311 - LLU; Alexander Kratky, E311 - LLU; Robert Bielak, E311 - LLU

    M. Kaltenbrunner, G. Liedl, A. Kratky, R. Bielak:
    "LAWD - Laser assisted wire drawing";
    Talk: LANE 2004, Erlangen; 09-21-2004 - 09-24-2004; in: "Proceedings of the 4th LANE", Meisenbach Bamberg, (2004), ISBN: 3-87525-202-0; 1175 - 1181.

  149. Authors: Alexander Kaplan; Martin Bögl; Gerhard Liedl, E311 - LLU; Dieter Schuöcker, E311 - LLU

    A. Kaplan, M. Bögl, G. Liedl, D. Schuöcker:
    "TiC/Al-Metal-Matrix-Composites produced by Laser Surface Treatment";
    Talk: Advaīnces in Automotive and Transportation Technology and Practice for the 21th Century, Wien/Austria; 06-14-1999 - 06-18-1999; in: "ISATA - Materials for Energy Efficient Vehicules", (1999), 305 - 312.

  150. Authors: Alexander Kaplan; Gerhard Liedl, E311 - LLU

    A. Kaplan, G. Liedl et al.:
    "Analysis of laser dispersing of TiC-Powder into Aluminium alloys";
    Talk: ECLAT, Hannover; 09-22-1998 - 09-23-1999; in: "Proceedings ECLAT", (1998), ISBN: 3-88355-263-1; 215 - 220.

  151. Author: Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "20 Basic Characteristics of Doctor of Technical Sciences and Way how to Develop them";
    Talk: 23rd International DAAAM Symposium, Zadar; 10-24-2012 - 10-27-2012; in: "Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium: "Make Harmony between Technology and Nature, and Your Mind will Fly Free as a Bird"", B. Katalinic (ed.); Annals of DAAAM for 2012 & Proceeding of the 23rd International DAAAM Symposium/DAAAM International Vienna, 23/1 (2012), ISSN: 2304-1382; Paper ID Volume 23, No.1 CDRom Version, 1 pages.

    More information

  152. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Ablaufplanung für komplexe flexible Fertigungssysteme";
    Talk: 4th Symposium "MMA`90", Novi Sad; 09-25-1990 - 09-27-1990; in: "Proc. 4th Symposium "MMA`90"", (1990), 381 - 394.

  153. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Aktueller Stand und Entwicklungstendenzen von Produktionssystemen";
    Talk: 1st International Conference Business System Management, Mostar; 09-26-1997 - 09-27-1997; in: "Proceedings of 1st International Conference Business System Management", (1997), 123 - 130.

  154. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Analiza, sinteza i optimiranje logistike vodjenja kompleksnih fleksibilnih sustava";
    Talk: 10th International Symposium BIAM`90, Zagreb; 06-30-1989; in: "Proc. 10th International Symposium BIAM`90", (1989), #.

  155. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Auslegung und Steuerung von flexiblen Montagesystemen";
    Talk: 4. Internationales DAAAM Symposium "Automation und Metrologie: Mensch, Technik, Umwelt", Brno, Tschechien; 09-16-1993 - 09-18-1993; in: "4. Internationales DAAAM Symposium "Automation und Metrologie: Mensch, Technik, Umwelt", (1993), 145 - 146.

  156. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Auslegung und Steuerung von flexiblen Montagesystemen of die Montage von Geräteelektromotoren";
    Talk: 2nd International Conference on Production Engineering, Zagreb; 11-18-1993 - 11-21-1993; in: "2nd International Conference on Production Engineering", (1993), 35 - 37.

  157. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Berechnung der Roboter -Trägheitsmatrizen";
    Talk: Internationale Tagung "Moderne Fertigung und Fertigungs-Meßtechnik", Wien; 04-02-1986 - 04-04-1986; in: "Proc. Internationale Tagung "Moderne Fertigung und Fertigungs-Meßtechnik"", (1986), 41 - 52.

  158. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Berechnung der Trägheitsmatrizen des Knickarmroboters Prototyp 1 & 2 der Fa. Voest-Alpine AG";
    Talk: Final Report, Forschungsinstitut "Advanced Robotics", Institut Nr. 311, TU-Wien,, Wien; 1985; in: " Final Report, Forschungsinstitut "Advanced Robotics", Institut Nr. 311, TU-Wien, ", (1985), # - #.

  159. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Berechnung dynamischer Koeffizienten bei der Konstruktion von Industrierobotern";
    Talk: 8th International Conference "BIAM'86", Zagreb; 06-16-1986 - 06-18-1986; in: "Proc. 8th International Conference "BIAM'86"", (1986), 180 - 184.

  160. Author: Branko Katalinic, E311 - IMS
    Other persons involved: Branko Katalinic, E311 - IMS; Milan Kljajin

    B. Katalinic:
    "BIONIC ASSEMBLY SYSTEMS : Concept design and scheduling of next generation of self-organizing flexible assembly system in CIM environment";
    Talk: 1st DAAAM International Conference on Advanced Technologies for Developing Countries, Slavonski Brod (invited); 09-12-2002 - 09-14-2002; in: "PROCEEDINGS of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries", B. Katalinic, M. Kljajin (ed.); (2002), 459 - 470.

  161. Author: Branko Katalinic, E311 - IMS
    Other persons involved: Vlado Majstorovic; Branko Katalinic, E311 - IMS; Dragan Covic; Vojo Visekruna

    B. Katalinic:
    "Bionic Assembly Systems: Design and Scheduling of Next Generation of Self-organizing Complex Flexible Assembly Systems";
    Talk: 2nd International Conference "Business Systems Management"- UPS 2001, Mostar; 05-31-2001 - 06-02-2001; in: "Proceedings of the 2nd International Conference "Business Systems Management"- UPS 2001", V. Majstorovic, B. Katalinic, D. Covic, V. Visekruna (ed.); DAAAM International Vienna & University of Mostar, Mostar & Vienna (2001), ISBN: 3-901509-26-7; 101 - 108.

  162. Author: Branko Katalinic, E311 - IMS
    Other persons involved: Jyri Papstel; Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Bionic Assembly Systems: Next Generation of Self-Organizing Complex Flexible Assembly Systems";
    Talk: 3rd International Conference of DAAAM National Estonia "Industrial Engineering - New Challenges to SME, Tallinn, Estonia (invited); 04-25-2002 - 04-27-2002; in: "Proceedings of the 3rd International Conference "Industrial Engineering - New Challenges to SME"", J. Papstel, B. Katalinic (ed.); DAAAM National Estonia & Tallinn Technical University, Tallinn (2002), ISBN: 9985-59-272-7; 96 - 99.

  163. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Characteristics of Modern Industrial Robots and their Applications";
    Talk: 6th International Conference "BIAM'82", Zagreb; 06-14-1982 - 06-16-1982; in: "Proc. 6th International Conference "BIAM'82"", (1982), 57 - 76.

  164. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "CIM - Present State and Development Trends";
    Talk: 2nd International Conference on Production Engineering, Zagreb (invited); 11-18-1993 - 11-21-1993; in: "2nd International Conference on Production Engineering", (1993), 26 - 27.

  165. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Complex Flexible Manufacturing Systems - Design of Control Structures and Scheduling Strategies";
    Talk: 25th CIRP International Seminar, Bled, Slovenia; 04-22-1993 - 04-23-1993; in: "25th CIRP International Seminar", (1993), 25 - 26.

  166. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Control Structure and Scheduling Strategies for flexibel Assembly System - ATB";
    Talk: Vienna University of Technology, Vienna, Austria; 02-21-1993 - 02-24-1993; in: "Final Repot , Vienna University of Technology", (1993), 12 - 13.

  167. Author: Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "DAAAM International Vienna: Background, History, Aims, Structure, Activities & Future";
    Talk: 14th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Reconstruction and Development', Sarajevo (invited); 10-22-2003 - 10-25-2003; in: "Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium", B. Katalinic (ed.); DAAAM International Vienna, Vienna (2003), ISBN: 3-901-509-34-8; 8 - 26.

  168. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Demonstration Board for the Simulation of Digital Control Units";
    Talk: 27th International Conference "JUREMA'82", Zagreb; 1982; in: "Proc. 27th International Conference "JUREMA'82"", (1982), 17 - 20.

  169. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Design of Scheduling Structures and Strategies for Complex Flexible Manufacturing Systems";
    Talk: International Conference on Computer Integrated Manufacturing, CIM 96, Zakopane, Poland; 05-14-1996 - 05-17-1996; in: "Proceedings of International Conference on Computer Integrated Manufacturing", (1996), 145 - 152.

  170. Author: Branko Katalinic, E311 - IMS
    Other person involved: Nitin Afzulpukar

    B. Katalinic:
    "Design and Scheduling of Next Generation Self-organizing Complex Flexible Assembly System Called Biologic Assembly Systems";
    Talk: 2nd Asian Symposium on Industrial Automation and Robotics - ASIAR 2001, Bangkok, Thailand (invited); 05-17-2001 - 05-18-2001; in: "Proceedings of the 2nd Asian Symposium on Industrial Automation and Robotics - ASIAR 2001", N. Afzulpukar (ed.); Asian Institute of Technology, Bangkok (2001), ISBN: 974-8208-34-6; 310 - 316.

  171. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Design Methodology of Scheduling Strategies and Scenarios of Complex Flexible Systems";
    Talk: 29th CIRP International Seminar on Manufacturing Systems, Osaka, Japan (invited); 05-11-1997 - 05-13-1997; in: "Proceedings of the 29th CIRP International Seminar on Manufacturing Systems", (1997), 179 - 184.

  172. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Design Methodology of Scheduling Strategies and Scenarios of Complex Flexible Systems";
    Talk: Publischer Scientific and Scientific and Technical Association of Mechanical Engineering, Sofia (invited); 11-30-1997; in: "Scientific Reports, Year 4, No. 8", (1997), 5 - 10.

  173. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Design of Control Structures and Strategies for Complex Flexible Manufacturing Systems";
    Talk: International Conference on Production Engineering, Zagreb, Croatia; 06-12-1992 - 06-15-1992; in: "Proc. International Conference on Production Engineering", (1992), 24 - 26.

  174. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Design of Control Structures and Strategies for Complex FMS";
    Talk: 3rd DAAAM International Symposium "Flexible and Intelligent Automation", Budapest, Hungary; 11-05-1992 - 11-06-1992; in: "Proc. of 3rd DAAAM International Symposium "Flexible and Intelligent Automation"", (1992), 93 - 94.

  175. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Design of Control Structures and Strategies of Complex Flexible Manufacturing Systems";
    Talk: CSFR National Conference, Kosice; 09-09-1992 - 09-11-1992; in: "Prof. CSFR National Conference", (1992), 15 - 16.

  176. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Design of Control Structures for Complex Flexible Manufacturing Systems";
    Talk: IFAC Workshop on Automatic Control Structures for Complex Flexible Manufacturing Systems, Istanbul; 06-03-1992 - 06-05-1992; in: "IFAC Workshop on Automatic Control for Quality and Productivity "ACQP'92"", (1992), 26 - 33.

  177. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Development and Applications of Industrial Robots";
    Talk: Conference "Implementation of Electronic in Mechanical Engineering", Fojnica; 02-17-1983 - 02-19-1983; in: "Proc. Conference "Implementation of Electronic in Mechanical Engineering"", (1983), 191 - 198.

  178. Author: Branko Katalinic, E311 - IMS
    Other person involved: Vitaly Lopota

    B. Katalinic:
    "Development Trends in mechanical Robotics";
    Keynote Lecture: International Youth Conference, St. Petersburg (invited); 09-06-2011 - 09-08-2011; in: "Mechatronics and Robotics", V. Lopota (ed.); (2011), ISBN: 978-5-905-18389-8; 5 - 6.

  179. Author: Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Eröffnungsvortrag - DAAAM International Network: Past - Present - Future";
    Keynote Lecture: 22nd International DAAAM Symposium, Wien (invited); 11-23-2011 - 11-26-2011; in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"", B. Katalinic (ed.); DAAAM International Vienna, (2011), ISBN: 978-3-901509-83-4; 55 - 56.

  180. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Flexibles Montagesystem für die Montage von Geräteelektromotoren - Auslegung und Steuerung";
    Talk: Zeitschrift des Österreichischen Verbandes für Elektrotechnik, Wien / New York; 02-03-1994; in: "Zeitschrift des Österreichischen Verbandes für Elektrotechnik", (1994), 257 - 261.

  181. Author: Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Globalisation and Technology: New Possibilities and Risk Factors";
    Talk: 14 th DAAAM International Symposium, Sarajevo (invited); 10-22-2003 - 10-25-2003; in: "Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium", B. Katalinic (ed.); DAAAM International Vienna, Vienna (2003), ISBN: 3-901-509-34-8; 205 - 210.

  182. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Industrial Robots and FMS - state of art and development trends";
    Talk: International Conference KoREMAī92, Zagreb, Croatia; 04-26-1992 - 04-29-1992; in: "Proc. International Conference KoREMA'92", (1992), 14 - 16.

  183. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Intelligent Manufacturing Systems als logisches Ergebnis der Evolution von Produktionsystemen";
    Talk: 13th International Conference BIAMī96, Zagreb; 06-18-1996 - 06-21-1996; in: "Proceedings of the 13th International Conference BIAMī96", (1996), A-1 - A-4.

  184. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Intelligent Scheduling of Robotized Flexible Assembly System";
    Talk: International Conference ISMCR-93, Torino, Italy; 09-21-1993 - 09-24-1993; in: "Proc. International Conference ISMCR-93", (1993), 126 - 127.

  185. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Kinematical Characteristics of Industrial Robot's Trajectories";
    Talk: 5th International Conference "BIAM'80", Zagreb; 06-09-1980 - 06-11-1980; in: "Proc. 5th International Conference "BIAM'80"", (1980), 6 - 44.

  186. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Kinematical Structures of Nowadays Industrial Robots";
    Talk: 7th International Conference "BIAM'84", Zagreb; 06-30-1984; in: "Proc. 7th International Conference "BIAM'84"", (1984), 35 - 46.

  187. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Megatrends in der Automatisierung der Produktion, Elektrotechnik und Informationstechnik";
    Talk: Zeitschrift des Österreichischen Verbandes für Elektrotechnik, Wien / New York; 1996; in: "Zeitschrift des Österreichischen Verbandes für Elektrotechnik", (1996), 169 - 171.

  188. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Meßtechnik zur Optimierung bzw. Rationalisierung bei der Planung von Robotern und bei deren Steuerung und Überwachung";
    Talk: 4. Österreichisches Kolloquium für Experimentelle Dehnungs- und Spannungsanalyse, St.Wolfgang; 10-22-1987 - 10-24-1987; in: "Proc. "4. Österreichisches Kolloquium für Experimentelle Dehnungs- und Spannungsanalyse"", (1987), #.

  189. Author: Branko Katalinic, E311 - IMS
    Other person involved: Ante Covic

    B. Katalinic:
    "New Engineers for the Future: Action Balanced between Intelligence, Wisdom and Ethics";
    Talk: 10th Losinj Days of Bioethics, Mali Losinj (invited); 05-15-2011 - 05-18-2011; in: "10th Losinj Days of Bioethics", A. Covic (ed.); (2011), 39 - 42.

  190. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Optimierung der Abläufe eines komplexen FFS durch heuristische Vorgangsweise zur Lösung von Konfliktsituationen, 175-Jahre Vienna University of Technology";
    Talk: Internationales Symposium "Automatisation und Meßtechnik", Wien; 11-05-1990; in: "Proc. Internationales Symposium "Automatisation und Meßtechnik"", (1990), 65 - 66.

  191. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Optimierung der Maschinenbelegung in flexiblen Fertigungssystemen unter Berücksichtigung der im System vorhandenen Engpässe";
    Talk: XI. Werkzeugmaschinen Kolloquium, Wissenschaftlicher Verein für Maschinenbau, Budapest; 1988; in: "Proc. XI. Werkzeugmaschinen Kolloquium, Wissenschaftlicher Verein für Maschinenbau", (1988), #.

  192. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Optimierung der Maschinenbelegung in flexiblen Fertigungssystemen unter Berücksichtigung der Systemengpässe";
    Talk: 9th International Symposium BIAM`88, Zagreb; 06-13-1988 - 06-15-1988; in: "Proc. 9th International Symposium BIAM`88", (1988), 211 - 214.

  193. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Optimisation of Use and Management of Production Resources in Complex FMS";
    Talk: Workshop: Manufacturing Resource Planning, Brussels, Belgium; 05-10-1993 - 05-11-1993; in: "Proceedings of Workshop: Manufacturing Resource Planning", (1993), ISBN: 2-87352-009-4; 14 - 17.

  194. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Organisation and Scheduling of Transport System for Böhler Plant";
    Talk: Vienna University of Technology, Institut No. 311 & Interuniversitäry Center for CIM, Wien; 11-30-1991; in: "Final Report, Vienna University of Technology, Institut No. 311 & Interuniversitäry Center for CIM", (1991).

  195. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Robotics - Short List of Terms and Definitions";
    Talk: Supported by the COMETT Programme of the Commission of the EUROPEAN Communities, Aachen, Germany; 10-11-1993 - 11-06-1993; in: "Supported by the COMETT Programme of the Commission of the EUROPEAN Communities", (1993), 45 - 46.

  196. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Robots in Modern Industry";
    Talk: 8th International Conference - Society of Plastics and Rubber Engineers, Zagreb; 03-07-1988 - 03-11-1988; in: "Proc. 8th International Conference - Society of Plastics and Rubber Engineers", (1988), 1 - 8.

  197. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Simulation of FMS for New Sling Factory, Just-in-Time Concept, Kone Sowitsch Company";
    Talk: Institut für Fertigungstechnik & Forschungsinstitut "Advanced Robotics", Institut Nr. 311, TU-Wien, Wien; 06-30-1991; in: "Final Report, Institut für Fertigungstechnik & Forschungsinstitut "Advanced Robotics"", (1991).

  198. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Simulation und FMS";
    Talk: 2nd International Symposium Danubia-Adria Association for Automation and Metrology, Strbske Pleso, Slovakia; 12-09-1991 - 12-11-1991; in: "5. Proc. of 2nd International Symposium Danubia-Adria Association for Automation and Metrology", (1991), ISBN: 80-233-0225-6; 72 - 73.

  199. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Speech by Prof. Dr. Branko Katalinic";
    Talk: Dies Academicus - Doctor honoris causa Speech, Mostar (invited); 12-15-2003; in: "Prof. dr. sc. Branko Katalinic", University of Mostar, (2003), 24 - 29.

  200. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Stability Tests of Systems by Using Bode's or Nichols' Diagrams and a Digital Computer";
    Talk: 27th International Conference "JUREMA'82", Zagreb; 1982; in: "Proc. 27th International Conference JUREMA'82", (1982), 21 - 24.

  201. Author: Branko Katalinic, E311 - IMS
    Other persons involved: Branko Katalinic, E311 - IMS; Emil Wessely

    B. Katalinic:
    "Technical Product as a Materialisation of Engineers Idea and Design Strategy of Nature";
    Talk: 4th Workshop "Human Factor and Environmntalist", Kosice, Slovakia (invited); 12-05-2002 - 12-05-2002; in: "Proceedings of the 4th Workshop "Human Factor and Environmentalist"", B. Katalinic, E. Wessely (ed.); DAAAM International Vienna, (2002), ISBN: 3-901509-37-2; 9 - 12.

  202. Author: Branko Katalinic, E311 - IMS
    Other person involved: Zvonko Dragicevic

    B. Katalinic:
    "Technical Product as Materialisation of Engineers Idea and Design Strategies of Natuer";
    Talk: 1st International Textile, Clothing & Design Conference - Magic World of Textile - ITC&DC, Dubrovnik (invited); 10-06-2002 - 10-09-2002; in: "Proceedings of the 1st International Textile, Clothing & Design Conference - Magic World of Textile, ITC&DC", Z. Dragicevic (ed.); University of Zagreb, Faculty of Textile Technologies, (2002), ISBN: 953-96408-8-1; 3 - 7.

  203. Author: Branko Katalinic, E311 - IMS

    B. Katalinic:
    "Trends, Definitions, Population and Welding Applications of Modern Industrial Robots";
    Talk: International Conference "Mechanization, Automation, Robotics and Computer Application in Welding", Wien; 10-01-1987 - 10-03-1987; in: "Proc. International Conference "Mechanization, Automation, Robotics and Computer Application in Welding"", (1987), 159 - 170.

  204. Authors: Branko Katalinic, E311 - IMS; Joze Balic; I Pahole

    B. Katalinic, J. Balic, I. Pahole:
    "Scheduling of Complex Flexible Manufacturing Systems- Methodology Design";
    Talk: Journal of Mechanical Engineering, Ljubljana; 05-30-1998 - 06-30-1998; in: "Journal of Mechanical Engineering (44) No. 5-6", (1998), 168 - 174.

  205. Authors: Branko Katalinic, E311 - IMS; S. Celar

    B. Katalinic, S. Celar:
    "Computersimulation für die Auslegung und Steuerung von FFS";
    Talk: 7th International DAAAM Symposium, Wien; 10-17-1996 - 10-19-1996; in: "Proceedings of the 7th International DAAAM Symposium", (1996), 203 - 204.

  206. Authors: Branko Katalinic, E311 - IMS; S. Celar

    B. Katalinic, S. Celar:
    "Discrete-event Based Computer Simulation of Complex Flexible Manufacturing Systems";
    Talk: 13th International Conference BIAMī96, Zagreb; 06-18-1996 - 06-21-1996; in: "Proceedings of the 13th International Conference BIAMī96", (1996), J-1 - J-4.

  207. Authors: Branko Katalinic, E311 - IMS; S. Celar

    B. Katalinic, S. Celar:
    "Simulation als Werkzeug bei der Auslegung und Steuerung des FFS für Blechbearbeitung";
    Talk: 12th International Conference BIAM'94, Zagreb; 06-23-1994 - 06-24-1994; in: "Proceedings of the 12th International Conference BIAM’94", (1994), 9 - 12.

  208. Authors: Branko Katalinic, E311 - IMS; Ilija Cosic; Vladimir Katic; Zeljko Tekic
    Other person involved: Vladimir Katic

    B. Katalinic, I Cosic, V. Katic, Z. Tekic:
    "Engineers for knowledge based Society";
    Talk: 17th Conference an Development Trends, Kopaonik (invited); 03-07-2011 - 03-10-2011; in: "Europe 2020: Knowledge based Society", V. Katic (ed.); (2011), 13 - 21.

  209. Authors: Branko Katalinic, E311 - IMS; A. Divic

    B. Katalinic, A. Divic:
    "Auslegung einer robotisierten Zelle für die Kommissionierung von Teilen vor der Montage";
    Talk: 4. Internationales DAAAM Symposium "Automation und Metrologie: Mensch, Technik, Umwelt", Brno, Tschechien; 09-16-1993 - 09-18-1993; in: "4. Internationales DAAAM Symposium "Automation und Metrologie: Mensch, Technik, Umwelt"", (1993), 147 - 148.

  210. Authors: Branko Katalinic, E311 - IMS; Sergey Egorov
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic, S. Egorov:
    "Subordination and Selforganisation in the Bionic Assembly Systems";
    Talk: 13th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Learning from Nature', Vienna; 10-23-2002 - 10-26-2002; in: "Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium", B. Katalinic (ed.); DAAAM International Vienna, Vienna (2002), ISBN: 3-901509-29-1; 253 - 254.

  211. Authors: Branko Katalinic, E311 - IMS; E Fabian

    B. Katalinic, E Fabian:
    "Automatische Identifikation als Baustein der CIM-Lösungen in Produktionbetrieben";
    Talk: 13th International Conference BIAMī96, Zagreb; 06-18-1996 - 06-21-1996; in: "Proceedings of the 13th International Conference BIAMī96", (1996), F-1 - F-4.

  212. Authors: Branko Katalinic, E311 - IMS; E Fabian

    B. Katalinic, E Fabian:
    "Konzept eines sophistieziertes Manipulationssystems für komplexe logistische Aufgaben";
    Talk: 7th International DAAAM Symposium, Vienna; 10-17-1996 - 10-19-1996; in: "Proceedings of the 7th International DAAAM Symposium", (1996), 205 - 206.

  213. Authors: Branko Katalinic, E311 - IMS; Edmond Hajrizi
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic, E. Hajrizi:
    "Comparison of Working Scenarios by "GA - Optimizer" - an Intelligent Software Modul for Optimization of Complex FMS Scheduling";
    Talk: 11the International DAAAM Symposium, Opatija; 10-19-2000 - 10-21-2000; in: " Annals of DAAAM for 2000 & Proceedings of the 11the International DAAAM Symposium, Opatija", B. Katalinic (ed.); (2000), ISBN: 3-901509-13-5; 8S - 9S.

  214. Authors: Branko Katalinic, E311 - IMS; Edmond Hajrizi

    B. Katalinic, E. Hajrizi:
    "Die Struktur eines intelligenten Moduls für Leitstandsoftware komplexer FFS";
    Talk: 8th International Scientific Conference Co-Mat-Tech, Trnava; 10-19-2000 - 10-20-2000; in: "Proceedings of the 8th International Scientific Conference Co-Mat-Tech 2000", (2000), ISBN: 80-227-1413-5; 127 - 132.

  215. Authors: Branko Katalinic, E311 - IMS; Adis Kavaz
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic, A. Kavaz:
    "Scheduling Algorithm of Sequence of Orders in a Linear Assembly Line with Limited Buffers";
    Talk: 14th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Reconstruction and Development', Sarajevo (invited); 10-22-2003 - 10-25-2003; in: "Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium", B. Katalinic (ed.); DAAAM International Vienna, Vienna (2003), ISBN: 3-901-509-34-8; 213 - 214.

  216. Authors: Branko Katalinic, E311 - IMS; Vedran Kordic, E311 - IMS

    B. Katalinic, V. Kordic:
    "Bionic Assembly System: Concept, Structure and Function";
    accepted as talk for: 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Bath, United Kingdom (invited); 04-05-2004 - 04-07-2004; in: "Proceedings of 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering", (2004).

  217. Authors: Branko Katalinic, E311 - IMS; Vedran Kordic, E311 - IMS
    Other person involved: Kanji Ueda, E311-IMS

    B. Katalinic, V. Kordic:
    "Bionic Assembly Systems: Autonomous Agents in Self Organising Complex Flexible Assembly System in CIM Environment";
    Talk: 4th International Workshop on Emergent Synthesis - IWES`02, Kobe, Japan (invited); 05-09-2002 - 05-10-2002; in: "Proceedings of 4th International Workshop on Emergent Synthesis", K. Ueda (ed.); Kobe University, (2002), 3 - 12.

  218. Authors: Branko Katalinic, E311 - IMS; Vedran Kordic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic, V. Kordic:
    "Control System of Transport Class Assembly Units of Biologic Assembly System";
    Talk: 14 th DAAAM International Symposium, Sarajevo, Bosnia and Hezegovina; 10-22-2003 - 10-25-2003; in: "Annals of DAAAM for 2003 & Proceedings of the 14 th DAAAM International Symposium", B. Katalinic (ed.); DAAAM International Vienna, Vienna (2003), ISBN: 3-901509-34-8; 213 - 214.

  219. Authors: Branko Katalinic, E311 - IMS; Vedran Kordic, E311 - IMS

    B. Katalinic, V. Kordic:
    "Reconfigurable assembly by reactive autonomous robots";
    accepted as talk for: International Symposium on Robotics and Automation - ISRA 2004, Queretaro, Mexico; 08-25-2004 - 08-27-2004; in: "Proceedings of International Symposium on Robotics and Automation - ISRA 2004", (2004).

  220. Authors: Branko Katalinic, E311 - IMS; Vedran Kordic, E311 - IMS

    B. Katalinic, V. Kordic:
    "Simple reactive robots in assembly domain";
    accepted as talk for: 8th International Conference on Mechatronics Technology, Hanoi, Vietnam; 11-08-2004 - 11-12-2004; in: "Proceedings of 8th International Conference on Mechatronics Technology", (2004).

  221. Authors: Branko Katalinic, E311 - IMS; Vedran Kordic, E311 - IMS; Ilija Cosic
    Other person involved: Miodrag Stojiljkovic

    B. Katalinic, V. Kordic, I Cosic:
    "Bionic Assembly System";
    Talk: HIPNEF 2004, Vrnjacka Banja (invited); 05-19-2004 - 05-21-2004; in: "29th Scientific-Expert Conference Proceedings", M Stojiljkovic et al. (ed.); Mechanical Faculty, University of Nis, 29 (2004), ISBN: 86-80587-31-1; 35 - 42.

  222. Authors: Branko Katalinic, E311 - IMS; Vedran Kordic, E311 - IMS; Markus Stopper, E311-IMS

    B. Katalinic, V. Kordic, M. Stopper:
    "Interaction of Subordination and Self-Organisation in Working Scenarios of Bionic Assembly System";
    Talk: The 3rd Asian Conference on Automation and Robotics - ASIAR 03, Bangkok, Thailand (invited); 05-08-2003 - 05-09-2003; in: "Proceedings of the 3rd Asian Conference on Automation and Robotics - ASIAR 03", Asian Institute of Technology, Bangkok, Thailand (2003), ISBN: 974-229-467-4; 136 - 141.

  223. Authors: Branko Katalinic, E311 - IMS; Aleksandar Lazinica, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic, A. Lazinica:
    "Design of Autonomous Mobile Robots in Bionic Assembly System: Project Concept";
    Talk: 14th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Reconstruction and Development', Sarajevo (invited); 10-22-2003 - 10-25-2003; in: "Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium", B. Katalinic (ed.); DAAAM International Vienna, Vienna (2003), ISBN: 3-901-509-34-8; 215 - 216.

  224. Authors: Branko Katalinic, E311 - IMS; Aleksandar Lazinica, E311 - IMS; Munir Merdan, E311 - IMS
    Other person involved: Csaba Gyenge

    B. Katalinic, A. Lazinica, M. Merdan:
    "Bionic Assembly System and Evolutionary Robotics: Research Project Concept";
    Talk: 6th International Conference Modern Technologies in Manufacturing, Cluj-Napoca (invited); 10-02-2003 - 10-04-2003; in: "Annals of MTeM for 2003 & Proceedings of 6th International Conferece Modern Technologies in Manufacturing", C. Gyenge (ed.); Technical University of Cluj-Napoca, (2003), 267 - 270.

  225. Authors: Branko Katalinic, E311 - IMS; Berislav Ljoljic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic, B. Ljoljic:
    "Optimal Variant Determination of Wall - Unit Housing";
    Talk: 11the International DAAAM Symposium, Opatija; 10-19-2000 - 10-21-2000; in: "Annals of DAAAM for 2000 & Proceedings of the 11the International DAAAM Symposium", B. Katalinic (ed.); (2000), ISBN: 3-901509-13-5; 215 - 216.

  226. Authors: Branko Katalinic, E311 - IMS; Berislav Ljoljic, E311 - IMS
    Other persons involved: Vlado Majstorovic; Branko Katalinic, E311 - IMS; Dragan Covic; Vojo Visekruna

    B. Katalinic, B. Ljoljic:
    "Warehousing System as Component Reduction of Business Expenditures";
    Talk: 2nd International Conference "Business Systems Management"- UPS 2001, Mostar; 05-31-2001 - 06-02-2001; in: "Proceedings of the 2nd International Conference "Business Systems Management"- UPS 2001", V. Majstorovic, B. Katalinic, D. Covic, V. Visekruna (ed.); DAAAM International Vienna & University of Mostar, Mostar & Vienna (2001), ISBN: 3-901509-26-7; 109 - 111.

  227. Authors: Branko Katalinic, E311 - IMS; Munir Merdan, E311 - IMS; Aleksandar Lazinica, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic, M. Merdan, A. Lazinica:
    "An Algorithm for Solving Assembly Station Overloading in Bionic Assembly System";
    Talk: 14th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Reconstruction and Development', Sarajevo (invited); 10-22-2003 - 10-25-2003; in: "Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium", B. Katalinic (ed.); DAAAM International Vienna, Vienna (2003), ISBN: 3-901-509-34-8; 217 - 218.

  228. Authors: Branko Katalinic, E311 - IMS; J. Nanasi

    B. Katalinic, J. Nanasi:
    "Effizienzerhöhung von FFS durch Intelligente Vernetzung";
    Talk: 7th International DAAAM Symposium, Wien; 10-17-1996 - 10-19-1996; in: "Proceedings of the 7th International DAAAM Symposium", (1996), 207 - 208.

  229. Authors: Branko Katalinic, E311 - IMS; J. Nanasi

    B. Katalinic, J. Nanasi:
    "Ein Expertensystem für die Planung auf dem FFS- Leitstand";
    Talk: Proceedings of International Conference on Computer Integrated Manufacturing, Zakopane, Poland; 05-14-1996 - 05-17-1996; in: "Proceedings of International Conference on Computer Integrated Manufacturing , CIM 96, Volume II", (1996), 153 - 158.

  230. Authors: Branko Katalinic, E311 - IMS; J. Nanasi

    B. Katalinic, J. Nanasi:
    "Expertensysteme bei der intelligenten Steuerung von komplexen flexiblen Systemen";
    Talk: 12th International Conference BIAM'94, Zagreb, Kroatien; 06-23-1994 - 06-24-1994; in: "Proceedings of the 12th International Conference BIAM'94", (1994), ISBN: 953-6037-03-3; 57 - 60.

  231. Authors: Branko Katalinic, E311 - IMS; Z Sarson

    B. Katalinic, Z. Sarson:
    "A Practical Example of Industrial Robot's Application";
    Talk: 5th International Conference "BIAM'80", Zagreb; 06-09-1980 - 06-11-1980; in: "Proc. 5th International Conference BIAM'80", (1980), 6 - 95.

  232. Authors: Branko Katalinic, E311 - IMS; Kemajl Stuja, E311 - IMS; S Pllana
    Other person involved: Branko Katalinic, E311 - IMS

    B. Katalinic, K. Stuja, S. Pllana:
    "Arena: Enterprise Wide Modeling and Simulation";
    Talk: 2nd DAAAM International Workshop "Intelligent Manufacturing Systems", Kosice; 11-30-2000 - 11-30-2000; in: "Proceedings of the 2nd DAAAM International Workshop "Intelligent Manufacturing Systems"", B. Katalinic (ed.); (2000), ISBN: 3-901509-18-6; 37 - 38.

  233. Authors: Branko Katalinic, E311 - IMS; T Surina

    B. Katalinic, T. Surina:
    "Inertial Load by Industrial Robots";
    Talk: International Conference "Informatica '79", Bled; 1979; in: "Proc. International Conference "Informatica '79"", (1979), 6 - 107.

  234. Authors: Branko Katalinic, E311 - IMS; Toma Udiljak

    B. Katalinic, T. Udiljak:
    "Comlex Flexible Manufacturnig Systems: Design Methodology of Working Scenarios and Schedulig Strategies";
    Talk: IASTED International Conference "Robotics and Manufacturing", Banff, Canada; 07-26-1998 - 07-29-1998; in: "Proceedings of the IASTED International Conference "Robotics and Manufacturing"", (1998), 81 - 88.

  235. Authors: Branko Katalinic, E311 - IMS; Toma Udiljak

    B. Katalinic, T. Udiljak:
    "Production Systems and Automation: Actual State and Development Trends (in Croatien)";
    Talk: Journal of Textile Technology, Vol 48 br. 1, Zagreb; 01-31-1999; in: "Journal of Textile Technology, Vol 48 br. 1", (1999), 1 - 7.

  236. Authors: Branko Katalinic, E311 - IMS; Toma Udiljak; H.S. Park

    B. Katalinic, T. Udiljak, H. Park:
    "Design Methodology of Scheduling Strategies and Scenarios of Complex Flexible Systems";
    Talk: 10th International Conference on Flexible Automation and Intelligent Manufacturing, University of Maryland at College Park,Maryland; 06-26-2000 - 06-28-2000; in: "Proceedings of the 10th International Conference on Flexible Automation and Intelligent Manufacturing", (2000), ISBN: 0-9701053-0-4; 215 - 223.

  237. Authors: Branko Katalinic, E311 - IMS; Vojo Visekruna; Vedran Kordic, E311 - IMS
    Other person involved: Kyo Il Lee

    B. Katalinic, V. Visekruna, V. Kordic:
    "Bionic Assembly System: Design and Scheduling of Next Generation of Self Organising Complex Flexible Assembly System in CIM Environment";
    Talk: 35th CIRP International Seminar on Manufacturing Systems "Manufacturing Technology in the Information Age", Seoul, Korea; 05-13-2002 - 05-15-2002; in: "Proceeding of 35th CIRP International Seminar on Manufacturing Systems - Manufacturing Technology in the Information Age", K. Lee et al. (ed.); Seoul National University, (2002), 155 - 162.

  238. Authors: Holger Koch; Rodrigo Gómez Vásquez; Andreas Otto, E311 - LLU
    Other person involved: Andreas Otto, E311 - LLU

    H. Koch, R. Gómez Vásquez, A. Otto:
    "Multiphysical Simulation of Laser Material Processing";
    Talk: Lane 2012, Erlangen, BRD (invited); 11-12-2012 - 11-15-2012; in: "Physics Proceedia", A. Otto (ed.); Elsevier, Volume 39 (2012), Paper ID 1875-3892, 9 pages.

    More information

  239. Authors: Vedran Kordic, E311 - IMS; Branko Katalinic, E311 - IMS

    V. Kordic, B. Katalinic:
    "Agent Environment Interaction and Specialisation";
    Talk: 3rd DAAAM International Workshop "Intelligent Manufacturing Systems", Kosice, Slovak Republic; 11-29-2001; in: "Proceeding of 3rd DAAAM International Workshop - Intelligent Manufacturing Systems", (2001), ISBN: 3-901509-31-3; 37 - 38.

  240. Authors: Vedran Kordic, E311 - IMS; Branko Katalinic, E311 - IMS; Berislav Ljoljic, E311 - IMS
    Other persons involved: Branko Katalinic, E311 - IMS; Emil Wessely

    V. Kordic, B. Katalinic, B. Ljoljic:
    "Agent Based Manufacturing";
    Talk: 4th Workshop "Human Factor and Environmentalist", Kosice, Slovaki; 11-05-2002; in: "Proceedings of the 4th Workshop 'Human Factor and Environmentalist'", B. Katalinic, E. Wessely (ed.); DAAAM International Vienna, Vienna (2002), ISBN: 3-901509-37-2; 53 - 54.

  241. Authors: Vedran Kordic, E311 - IMS; Branko Katalinic, E311 - IMS; Berislav Ljoljic, E311 - IMS

    V. Kordic, B. Katalinic, B. Ljoljic:
    "Toward Autonomous Agent Design Concept";
    Talk: 3rd International Conference of DAAAM National Estonia "Industrial Engineering - New Challenges to SME, Tallin, Estonia; 04-25-2002 - 04-27-2002; in: "Proceedings of 3rd International Conference Industrial Engineering", (2002), ISBN: 9985-59-272-7; 100 - 103.

  242. Authors: Vedran Kordic, E311 - IMS; Branko Katalinic, E311 - IMS; Kemajl Stuja, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    V. Kordic, B. Katalinic, K. Stuja:
    "Requierements for Complete Agents";
    Talk: 12th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Precision Engineering, Jena, Germany; 10-24-2001 - 10-27-2001; in: "Proceeding of 12th DAAAM International Symposium - Intelligent Manufacturing & Automation - Focus on Precision Engineering", B. Katalinic (ed.); DAAAM International Vienna, Vienna (2001), ISBN: 3-901509-19-4; 243 - 244.

  243. Authors: Vedran Kordic, E311 - IMS; Berislav Ljoljic, E311 - IMS; Kemajl Stuja, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    V. Kordic, B. Ljoljic, K. Stuja:
    "Synthesis of Autonomous Agent";
    Talk: 13th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Learning from Nature', Vienna; 10-23-2002 - 10-26-2002; in: "Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium", B. Katalinic (ed.); DAAAM International Vienna, Vienna (2002), ISBN: 3-901509-29-1; 275 - 276.

  244. Authors: P Kostal; Branko Katalinic, E311 - IMS; Jaroslav Bindas
    Other person involved: Branko Katalinic, E311 - IMS

    P. Kostal, B. Katalinic, J. Bindas:
    "Application of Ultrasound by Grinding";
    Talk: 13th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Learning from Nature', Vienna; 10-23-2002 - 10-26-2002; in: "Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium", B. Katalinic (ed.); DAAAM International Vienna, Vienna (2002), ISBN: 3-901509-29-1; 281 - 282.

  245. Authors: P Kostal; Branko Katalinic, E311 - IMS; M. Matusova
    Other person involved: Branko Katalinic, E311 - IMS

    P. Kostal, B. Katalinic, M. Matusova:
    "Analysing of Positioning and Clamping Cases";
    Talk: 12th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Precision Engineering, Jena, Germany; 10-24-2001 - 10-27-2001; in: "Annals of DAAAM for 2001 & Proceedings of the 12the International DAAAM Symposium", B. Katalinic (ed.); DAAAM International Vienna, Vienna (2001), ISBN: 3-901509-19-4; 247 - 248.

  246. Authors: Iva Kovacic, E234 - 2; Kristina Orehounig, E259 - 3; Ulrich Renger, E311 - FET; Lars Oberwinter; Christoph Dorn, E311 - FET; Fritz Bleicher, E311 - FET; Ardeshir Mahdavi, E259 - 3
    Other person involved: Jose Bartolo

    I. Kovacic, K. Orehounig, U. Renger, L. Oberwinter, C. Dorn, F. Bleicher, A. Mahdavi:
    "A holistic model for an energy efficient production facility";
    Talk: 1st International Conference On Sustainable Intelligent Manufacturing, Leiria, Portugal; 06-28-2011 - 07-01-2011; in: "1st International Conference On Sustainable Intelligent Manufacturing", J. Bartolo et al. (ed.); eigene Publikation - Conference, 1 (2011).

    More information

  247. Authors: Lukas Kräuter; M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM

    L. Kräuter, M.N. Durakbasa, P.H. Osanna:
    "Interrelation of Metrology and Nanotechnology with intellectual Property Rights";
    Talk: The 9th International Symposium on Measurement Technology and Intelligent Instruments, St. Petersburg; 06-29-2009 - 07-02-2009; in: "Proceedings of ISMTII-2009", D.S. Rozhdestvensky Optical Society, I/Russia (2009), 167 - 171.

  248. Authors: Lukas Kräuter; M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM
    Other person involved: Milan Tysler

    L. Kräuter, M.N. Durakbasa, P.H. Osanna:
    "Metrology and Nanotechnology in Interrelation with Intellectual Property Rights";
    Talk: 7th International Conference on Measurement, Congress Centre of SAS, Smolenice Castle, Slovakia; 05-20-2009 - 05-23-2009; in: "MEASUREMENT 2009", M. Tysler et al. (ed.); Institute of Measurement Science, SAS, Bratislava (2009), ISBN: 978-80-969672-1-6; 173 - 177.

  249. Authors: Lukas Kräuter; Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM
    Other person involved: Ivan Frollo

    L. Kräuter, P.H. Osanna, M.N. Durakbasa:
    "Quality Assurance and Metrology for Change Management Process under Socio-Economic Human Aspects - Investigation and Results";
    Talk: Proceedings Measurement 2007 Institute of Measurement Science, Smolenice, Slovakia; 05-20-2007 - 05-24-2007; in: "Proceedings Measurement 2007", i. Frollo et al. (ed.); Institute of Measurement Science, SAS, Bratislava (2007), ISBN: 978-80-969672-0-9; 371 - 375.

  250. Author: Alexander Kratky, E311 - LLU

    A. Kratky:
    "Laserunterstützte Umformverfahren";
    Talk: JOIN-EX 2008 - Internationaler Fachkongress der Schweiss- und Verbindungstechnik, Wien (invited); 10-09-2008 - 10-10-2008; in: "Join-Ex 2008", SZA Eigenverlag, Eigenverlag SZA Wien (2008), 139 - 156.

    More information

  251. Authors: Alexander Kratky, E311 - LLU; Ferdinand Bammer, E311 - LLU; Dieter Schuöcker, E311 - LLU

    A. Kratky, F. Bammer, D. Schuöcker:
    "Recent Progress in Laser Assisted Forming";
    Keynote Lecture: 5th Lane 2007, Erlangen Germany (invited); 09-25-2007 - 09-28-2007; in: "Laser Assisted Net Shape Engineering 5", Laser Assisted Net Shape Engingeering 5, 1 (2007), ISBN: 978-3-87525-261-3; 53 - 61.

    More information

  252. Authors: Alexander Kratky, E311 - LLU; Gerhard Liedl, E311 - LLU; Robert Bielak, E311 - LLU

    A. Kratky, G. Liedl, R. Bielak:
    "LADD - Laser assisted deep drawing";
    Talk: LANE 2004, Erlangen; 09-21-2004 - 09-24-2004; in: "Proceedings of the 4th LANE", Meisenbach Bamberg, (2004), ISBN: 3-87525-202-0; 1125 - 1134.

    More information

  253. Authors: Alexander Kratky, E311 - LLU; Dieter Schuöcker, E311 - LLU

    A. Kratky, D. Schuöcker:
    "Laser Assisted Forming";
    Talk: M4PL17, Igls/Austria; 01-21-2004 - 01-23-2004; in: "Proceedings M4PL17", (2004).

  254. Authors: Alexander Kratky, E311 - LLU; Dieter Schuöcker, E311 - LLU; Friedrich Klaas; Marin Dolibasic

    A. Kratky, D. Schuöcker, F. Klaas, M. Dolibasic:
    "Wärmebehandlung mittels Laser bei mehrstufigen Innenhochdruckumformtechnologien für Edelstahlteile";
    Talk: EFB-Fortbildungspraktikum 2005, Magdeburg (invited); 09-21-2005 - 09-22-2005; in: "Innenhochdruckumformen von Rohren", (2005), 299 - 310.

  255. Authors: Alexander Kratky, E311 - LLU; Dieter Schuöcker, E311 - LLU; Gerhard Liedl, E311 - LLU

    A. Kratky, D. Schuöcker, G. Liedl:
    "Processing with kW fibre lasers - advantages and limits";
    Talk: GCL/HPL, Lissabon (invited); 09-15-2008 - 09-19-2008; in: "Proceedings", SPIE, (2008), 1 - 11.

    More information

  256. Authors: Janos Kundrak; Peter Herbert Osanna, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM; Viktoria Bana

    J. Kundrak, P.H. Osanna, A. Afjehi-Sadat, V. Bana:
    "Surface Quality of Hard Turned Holes";
    Talk: IMEKO XVIII World Congress, Rio de Janeiro, Brasilien; 09-17-2006 - 09-22-2006; in: "IMEKO XVIII World Congress Metrologia", (2006), Paper ID #, 6 pages.

  257. Authors: Friedrich Lackner; R. Riegler; Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM
    Other person involved: Ivan Frollo

    F. Lackner, R. Riegler, P.H. Osanna, M.N. Durakbasa:
    "High Precision Strain Gage Based Sensor for Monitoring Suspension Forces at CERN";
    Talk: Proceedings Measurement 2007 Institute of Measurement Science, Smolenice, SK; 05-20-2007 - 05-24-2007; in: "Measurement 2007", i. Frollo et al. (ed.); Institute of Measurement Science, SAS, Bratislava (2007), ISBN: 978-80-969672-0-9; 366 - 370.

  258. Authors: Maximilian Lackner, E166 - 3; Michael Schwarzott; Gerhard Liedl, E311 - LLU

    M. Lackner, M. Schwarzott, G. Liedl et al.:
    "Heat transfer to a single plastic resin particle - Experimental investigations by flames and laser pulses";
    Poster: 3rd European Combustion Meeting ECM 2007, Chania, Crete; 04-11-2007 - 04-13-2007; in: "Proceedings ECM2007", (2007).

  259. Authors: Aleksandar Lazinica, E311 - IMS; Branko Katalinic, E311 - IMS

    A. Lazinica, B. Katalinic:
    "Assembly Station Robot In Bionic Assembly System";
    Talk: 13th International Conference "Industrial Systems", Herceg Novi, Serbia&Montenegro (invited); 09-07-2005 - 09-09-2005; in: "Proceedings of 13th International Conference "Industrial Systems"", (2005), 273 - 278.

  260. Authors: Aleksandar Lazinica, E311 - IMS; Branko Katalinic, E311 - IMS

    A. Lazinica, B. Katalinic:
    "Behavior of Transport Mobile Robot in Bionic Assembly System";
    Talk: IEEE International Conference on Mechatronics - ICM 2005, Taipei, Taiwan (invited); 07-10-2005 - 07-12-2005; in: "Proceedings of IEEE International Conference on Mechatronics - ICM 2005", (2005), ISBN: 0-7803-8999-9; 220 - 225.

  261. Authors: Aleksandar Lazinica, E311 - IMS; Branko Katalinic, E311 - IMS

    A. Lazinica, B. Katalinic:
    "Design of Transport Mobile Robot Behavior in Self-Organising Assembly System";
    Talk: 2005 IEEE/ASME International Conference on Advanced Intelligent Mechatronics - AIM 2005, Monterey, California, USA (invited); 07-24-2005 - 07-28-2005; in: "Proceedings of 2005 IEEE/ASME International Conference on Advanced Intelligent Mechatronics - AIM 2005", (2005), ISBN: 0-7803-9046-6; 100 - 105.

  262. Authors: Aleksandar Lazinica, E311 - IMS; Branko Katalinic, E311 - IMS

    A. Lazinica, B. Katalinic:
    "Multi-robot system for assembly applications";
    Talk: 36th Internaitonal Symposium on Robotics, Tokyo, Japan (invited); 11-29-2005 - 12-01-2005; in: "Proceedings of 36th International Symposium on Robotics", (2005), ISBN: 4-9902717-0-x; 42 - 47.

  263. Authors: Aleksandar Lazinica, E311 - IMS; Branko Katalinic, E311 - IMS

    A. Lazinica, B. Katalinic:
    "Navigation of Transport Mobile Robot in Bionic Assembly System";
    Talk: Proceedings of 4th Asian Conference on Industrial Automation and Robotics - ACIAR 2005, Bangkok, Thailand (invited); 05-11-2005 - 05-13-2005; in: "Proceedings of 4th Asian Conference on Industrial Automation and Robotics - ACIAR 2005", (2005), ISBN: 974-8208-58-3; 27 - 31.

  264. Authors: Aleksandar Lazinica, E311 - IMS; Branko Katalinic, E311 - IMS

    A. Lazinica, B. Katalinic:
    "Reconfiguration of transport mobile robot queues in Bionic Assembly System";
    Talk: Annals & Proceedings of 16th DAAAM Internaitonal Symposium, Opatija, Croatia (invited); 10-19-2005 - 10-22-2005; in: "Annals & Proceedings of 16th DAAAM International Symposium", DAAAM International Vienna, (2005), ISBN: 3-901509-46-1; 221 - 222.

  265. Authors: Christoph Lechner, E311 - FET; Fritz Bleicher, E311 - FET; Christoph Habersohn, E311 - FET; Christian Bauer; Stefan Gössinger, E302 - 2

    C. Lechner, F. Bleicher, Ch. Habersohn, C. Bauer, S. Gössinger:
    "The use of Machine Hammer Peening technology for smoothening and structuring of surfaces";
    Talk: 23rd International DAAAM Symposium, Zadar, Kroatien; 10-24-2012 - 10-27-2012; in: "Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium", DAAAM International Vienna, Austria, EU, 2012, 23/1 (2012), ISSN: 2304-1382; 331 - 337.

  266. Authors: Christoph Lechner, E311 - FET; Christoph Habersohn, E311 - FET; Yakup Kalkan; Fritz Bleicher, E311 - FET

    C. Lechner, Ch. Habersohn, Y. Kalkan, F. Bleicher:
    "Investigation of the influence of workpiece clamping depended virbration on machine hammer peened surfaces";
    Poster: 31st Danubia-Adria Symposium on Advances in Experimental Mechanics, Kempten (invited); 09-24-2014 - 09-27-2014; in: "31st Danubia-Adria Symposium on Advances in Experimental Mechanics", VDI Verein Deutscher Ingenieure e.V., (2014), ISBN: 978-3-00-046740-0; 46 - 47.

  267. Authors: Karl-Heinz Leitz; Holger Koch; Andreas Otto, E311 - LLU

    K. Leitz, H. Koch, A. Otto et al.:
    "Numerical Simulation of Drilling with Pulsed Beams";
    Talk: Lane 2012, Erlangen, BRD; 11-12-2012 - 11-15-2012; in: "Physics Procedia", Elsevier, Volume 39 (2012), 9 pages.

    More information

  268. Authors: Ines Leobner, E302 - 1; Wolfgang Kastner, E183 - 1; Iva Kovacic, E234 - 2; Bernhard Heinzl, E183 - 1; Matthias Rößler, E183 - 1; Fabian Dür, E311 - FET; Thomas Flatz, E311 - FET; Karl Ponweiser, E302 - 1; Fritz Bleicher, E311 - FET

    I. Leobner, W. Kastner, I. Kovacic, B. Heinzl, M. Rößler, F. Dür, T. Flatz, K. Ponweiser, F. Bleicher:
    "Interdisziplinäre Optimierungsstrategien zu Energieeffizienz in Produktionsbetrieben";
    Talk: 8. Internationale Energiewirtschaftstagung, Wien; 02-13-2013 - 02-15-2013; in: "8. Internationale Energiewirtschaftstagung an der TU Wien", (2013), 1 - 11.

    More information

  269. Authors: Ines Leobner, E302 - 1; Karl Ponweiser, E302 - 1; Christoph Dorn, E311 - FET; Fritz Bleicher, E311 - FET

    I. Leobner, K. Ponweiser, C. Dorn, F. Bleicher:
    "Monitoring of Energy Flows and Optimization of Energy Efficiency in a Production Facility";
    Talk: Proceedings of the 5th International Conference on Energy and Development - Environment - Biomedicine 2011 (EDEB '11), Corfu Island, Greece; 07-14-2011 - 07-16-2011; in: "RECENT RESEARCHES in GEOGRAPHY, GEOLOGY, ENERGY, ENVIRONMENT and BIOMEDICINE", (2011), ISBN: 978-1-61804-022-0; Paper ID 303-269, 5 pages.

  270. Authors: Jakob Lewandowski, E311 - RIF; Matthias Buhl; Burkhard Kittl, E311 - RIF

    J. Lewandowski, M. Buhl, B. Kittl:
    "IT Applications in Production Planning and Control";
    Talk: ICETE 2008 International Joint Conference on e-Business and Telecommunications, Porto/Portugal; 07-26-2008 - 07-29-2008; in: "ICE-B 2008, Proceedings of the International Conference on e-Business", (2008), ISBN: 978-989-8111-58-6; 285 - 291.

  271. Author: Gerhard Liedl, E311 - LLU

    G. Liedl et al.:
    "Carbon dioxide laser and diode laser dispersing of TiC-Powder into aluminium substrates";
    Talk: CLEO/IQEC, Nice/France; 09-10-2000 - 09-15-2000; in: "Proceedings CLEO/IQEC", (2000).

    More information

  272. Author: Gerhard Liedl, E311 - LLU

    G. Liedl et al.:
    "Excimer Laser Alloying of TiC Layer with the Steel Plate, ";
    Talk: Laser Material Processing, Opatija/Croatia; 06-01-1995 - 06-03-1996; in: "Proceedings Int. Conf. on Laser Material Processing", (1995), 953-946459-0-5; 183 - 195.

  273. Author: Gerhard Liedl, E311 - LLU
    Other persons involved: Abdel-Monem El-Batahgy; Mohamed Waly

    G. Liedl et al.:
    "Laser Assisted Joining of Dissimilar Materials";
    Talk: IQCMEA-ICF - Processing, Performance and Failure Analysis of Engineering Materials, Luxor, Egypt; 11-14-2011 - 11-17-2011; in: "Proceedings IQCMEA-ICF - Processing, Performance and Failure Analysis of Engineering Materials", A. El-Batahgy, M. Waly (ed.); (2011), 22 - 31.

    More information

  274. Authors: Gerhard Liedl, E311 - LLU; Holger Koch; Andreas Otto, E311 - LLU
    Other person involved: Norbert Enzinger, IWS - TU Graz

    G. Liedl, H. Koch, A. Otto:
    "Fügen mit Laserstrahlung";
    Talk: Fügetechnik in Österreich, Graz (invited); 04-10-2013; in: "Fügetechnik in Österreich", N. Enzinger (ed.); Schweiss- und Prüftechnik, (2013), 36 - 40.

    More information

  275. Authors: Gerhard Liedl, E311 - LLU; Alexander Kratky, E311 - LLU; Dieter Schuöcker, E311 - LLU

    G. Liedl, A. Kratky, D. Schuöcker:
    "Laser assisted shaping of metallic sheets and wires - a promising new application of high power lasers";
    Talk: SPIE Conf. on High Power Laser Ablation IV-HPLA, Taos, New Mexico/USA (invited); 04-22-2002 - 04-26-2002; in: "High Power Laser Ablation IV Vol. 4760", 4760 (2002), ISBN: 0-8194-4524-x; 633 - 644.

    More information

  276. Authors: Gerhard Liedl, E311 - LLU; Robert Pospichal, E311 - LLU
    Other person involved: Kerim R. Allakhverdiev

    G. Liedl, R. Pospichal:
    "FE-simulation of laser assisted joining of aluminum-steel";
    Talk: High Power Laser Systems & Applications, Istanbul, Turkey; 09-10-2012 - 09-14-2012; in: "XIX International Symposium on High-Power Laser Systems and Applications 2012", K. Allakhverdiev (ed.); SPIE, 8677 (2012).

    More information

  277. Authors: Gerhard Liedl, E311 - LLU; Robert Pospichal, E311 - LLU

    G. Liedl, R. Pospichal:
    "Simulation of laser multi-beam interference patterns for nanostructuring of materials";
    Talk: COMEC 2012, Cayo Santa Maria, Cuba; 11-05-2012 - 11-08-2012; in: "COMEC VII Conferencia Internacional de Ingenieria Mechánica", (2012), ISBN: 978-959-250-757-9; 10 pages.

    More information

  278. Authors: Gerhard Liedl, E311 - LLU; Dieter Schuöcker, E311 - LLU

    G. Liedl, D. Schuöcker:
    "Dieless wire drawing with lasers";
    Talk: International Conference on Lasers, Applications, and Technologies 2007, Minsk, Belarus; 05-28-2007 - 06-01-2007; in: "Proceedings SPIE", SPIE, 6735 (2007), ISSN: 0277-786x; 444 - 450.

    More information

  279. Authors: Gerhard Liedl, E311 - LLU; Dieter Schuöcker, E311 - LLU

    G. Liedl, D. Schuöcker et al.:
    "Laser induced ignition of gasoline direct injection engines";
    Talk: GCL/HPL, Prague (invited); 08-30-2004 - 09-03-2004; in: "Proceedings SPIE", SPIE, 5777 (2004), ISBN: 0-8194-5760-4; 955 - 960.

    More information

  280. Authors: Gerhard Liedl, E311 - LLU; Dieter Schuöcker, E311 - LLU; Bernhard Geringer, E315; Josef Graf, E315

    G. Liedl, D. Schuöcker, B. Geringer, J. Graf et al.:
    "Laser induced ignition";
    Talk: GCL/HPL, Gmunden, Austria (invited); 09-04-2006 - 09-08-2006; in: "Proceedings SPIE", SPIE, (2006), 1 - 6.

    More information

  281. Authors: Gerhard Liedl, E311 - LLU; Dieter Schuöcker, E311 - LLU; Erich Kny

    G. Liedl, D. Schuöcker, E. Kny:
    "Rapid Prototyping with Lasers using Metal Powder Jets";
    Talk: Proceedings of SPIE, Moskau (invited); 06-22-2002 - 06-28-2002; in: "Laser Processing of Advanced Materials and Laser Microtechnologies", SPIE, 5121 (2002), ISBN: 0-8194-4981-4; 399 - 405.

    More information

  282. Authors: Berislav Ljoljic, E311 - IMS; Borut Buchmeister; Branko Katalinic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Ljoljic, B. Buchmeister, B. Katalinic:
    "Strategic Planning as a Factor of Success in a Competitive Environment";
    Talk: 14th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Reconstruction and Development', Sarajevo (invited); 10-22-2003 - 10-25-2003; in: "DAAAM International Scientific Book 2003", B. Katalinic (ed.); DAAAM International Vienna, Vienna (2003), ISBN: 3-901-509-36-4; 359 - 366.

  283. Authors: Berislav Ljoljic, E311 - IMS; Branko Katalinic, E311 - IMS; Vedran Kordic, E311 - IMS

    B. Ljoljic, B. Katalinic, V. Kordic:
    "Choices and Phases in Strategic Management";
    Talk: 3rd DAAAM International Workshop "Intelligent Manufacturing Systems", Kosice, Slovak Republic; 11-29-2001; in: "Proceeding of 3rd DAAAM International Workshop - Intelligent Manufacuring Systems", DAAAM International Vienna, Vienna (2001), ISBN: 3-901509-31-3; 45 - 46.

  284. Authors: Berislav Ljoljic, E311 - IMS; Branko Katalinic, E311 - IMS; Vedran Kordic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Ljoljic, B. Katalinic, V. Kordic:
    "Strategical Planning as a Factor for Seccessful Business";
    Talk: 12th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Precision Engineering, Jena, Germany; 10-24-2001 - 10-27-2001; in: "Proceeding of 12th DAAAM International Symposium - Intelligent Manufacturing & Automation: Focus on Precision Engineering", B. Katalinic (ed.); DAAAM International Vienna, Vienna (2001), ISBN: 3-901509-19-4; 273 - 274.

  285. Authors: Berislav Ljoljic, E311 - IMS; Branko Katalinic, E311 - IMS; Kemajl Stuja, E311 - IMS; Vedran Kordic, E311 - IMS
    Other person involved: Jyri Papstel

    B. Ljoljic, B. Katalinic, K. Stuja, V. Kordic:
    "Simulation of Flexible Assembly System for Electrical Motors";
    Talk: 3rd International Conference of DAAAM National Estonia "Industrial Engineering - New Challenges to SME, Tallin, Estonia; 04-25-2002 - 04-27-2002; in: "Proceedings of 3rd International Conference: Industrial Engineering - New Challanges to SME", J. Papstel et al. (ed.); (2002), ISBN: 9985-59-272-7; 108 - 111.

  286. Authors: Berislav Ljoljic, E311 - IMS; Branko Katalinic, E311 - IMS; Kemajl Stuja, E311 - IMS; Vedran Kordic, E311 - IMS; Markus Stopper, E311-IMS
    Other person involved: Branko Katalinic, E311 - IMS

    B. Ljoljic, B. Katalinic, K. Stuja, V. Kordic, M. Stopper:
    "Performance Evaluation of Flexible Assembly System for Electrical Motors";
    Talk: 13th DAAAM International Symposium, Vienna, Austria; 10-23-2002 - 10-26-2002; in: "Proceeding of 13th DAAAM International Symposium", B. Katalinic (ed.); DAAAM International Vienna, Vienna (2002), ISBN: 3-901509-19-4; 317 - 318.

  287. Authors: Berislav Ljoljic, E311 - IMS; Branko Katalinic, E311 - IMS; Kemajl Stuja, E311 - IMS; Markus Stopper, E311-IMS
    Other persons involved: Branko Katalinic, E311 - IMS; Emil Wessely

    B. Ljoljic, B. Katalinic, K. Stuja, M. Stopper:
    "Evaluation of Performance of Compley Flexible Assembly System";
    Talk: 4th Workshop "Human Factor and Environmentalist", Kosice, Slovakia; 11-05-2002; in: "Proceedings of the 4th Workshop 'Human Factor and Environmentalist'", B. Katalinic, E. Wessely (ed.); DAAAM International Vienna, Vienna (2002), ISBN: 3-901509-37-2; 63 - 64.

  288. Authors: Viktorio Malisa; Branko Katalinic, E311 - IMS

    V. Malisa, B. Katalinic:
    "Next Generation of Production Systems: Original Concept of Selforganizing Production Systems";
    Talk: Eight International Conference on Manufacturing & Management, Gold Coast, Queensland, Australia (invited); 12-08-2004 - 12-10-2004; in: "Eight International Conference on Manufacturing Management Proceedings", (2004), ISBN: 0-9578296-1-2; 1 - 14.

  289. Authors: Patrick Masset; Fritz Bleicher, E311 - FET; Laurent Bortolotto; Georg Geiger, E311 - FET

    P Masset, F. Bleicher, L. Bortolotto, G. Geiger:
    "Improvement of the Resistance of Titanium Aluminides to Environmental Embrittlement";
    Talk: PRIME 2012, 222nd Meeting of ECS, Honolulu (invited); 10-07-2012 - 10-12-2012; in: "222nd Meeting of ECS", (2012).

  290. Authors: Thomas Mierer, PEC; Fritz Bleicher, E311 - FET
    Other person involved: Fritz Bleicher, E311 - FET

    T. Mierer, F. Bleicher:
    "Partikelmessung und Reinraumsimulation";
    Talk: Reinraumtechniktag 2008, Austria Trend Hotel "Savoyen"; 10-09-2008 - 10-09-2009; in: "Reinraumtechniktag 2008", F. Bleicher (ed.); (2008).

    More information

  291. Authors: Thomas Mikats, E311 - FET; Stephan Krall, E311; Fritz Bleicher, E311 - FET

    T. Mikats, S. Krall, F. Bleicher:
    "Experimental Investigation of Material Damping in Polymer Concrete and Welded Steel Parts for Machine Tool Quills";
    Poster: 30th DAS Symposium on Advances in Experimental Mechanics, Primosten (invited); 09-25-2013 - 09-28-2013; in: "30th DAS Symposium on Advances in Experimental Mechanics", Croation Society of Mechanics, Zagreb (2013), ISBN: 978953753917-7; 230 - 231.

  292. Authors: Calin Neamtu; Liviu Crisan; Daniela Popescu; M. Numan Durakbasa, E311 - AuM

    C. Neamtu, L. Crisan, D. Popescu, M.N. Durakbasa:
    "Modern Instruments for Teaching Coordinate Metrology";
    Talk: IXth INTERNATIONAL SCIENTIFIC CONFERENCE Coordinate Measuring Technique, Ustron; 04-14-2010 - 04-16-2010; in: "Advances in Coordinate Metrology", Wydawnictwo Akademii Techniczno-Humanistycznej W Bielsku-Bialej, I Bielsko-Biala (2010), ISBN: 978-83-62292-56-1; 349 - 358.

  293. Authors: Anil Nomak Akdogan; M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Mehmet Emin Yurci

    N. Nomak Akdogan, M.N. Durakbasa, P.H. Osanna, M.E. Yurci:
    "HIGH PRECISION DETERMINATION AND STATISTICAL EVALUATION OF SURFACE ROUGHNESS ALTERATIONS OF SELECTED MATERIALS";
    Talk: IMEKO XVIII World Congress, Rio de Janeiro; 09-17-2006 - 09-22-2006; in: "METROLOGY FOR A SUSTAINABLE DEVELOPMENT", LETRA CAPITAL EDITORA, Rio de Janeiro, Brasilien (2006), #.

  294. Authors: Anil Nomak Akdogan; M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Mehmet Emin Yurci
    Other persons involved: Ali Afjehi-Sadat, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM

    N. Nomak Akdogan, M.N. Durakbasa, P.H. Osanna, M.E. Yurci:
    "Identifying Mould Surface Texture Parameters Experimentally with the Help of Precision Measurement Techniques";
    Talk: ICPM 2005 Proceedings, Wien; 10-18-2005 - 10-19-2005; in: "III. INTERNATIONAL CONGRESS OF PRECISION MACHINING", A. Afjehi-Sadat, M.N. Durakbasa, P.H. Osanna (ed.); (2005), ISBN: 3-901-888-31-4; 49 - 55.

  295. Authors: Martin Obermair, E311 - FET; Andreas Steininger, E311; Fritz Bleicher, E311 - FET

    M. Obermair, A. Steininger, F. Bleicher:
    "Experimental Determination of Cutting Forces in Hard Tuning Operations";
    Poster: 30th DAS Symposium on Advances in Experimental Mechanics, Primosten (invited); 09-25-2013 - 09-28-2013; in: "30th DAS Symposium on Advances in Experimental Mechanics", Croation Society of Mechanics, Zagreb (2013), ISBN: 978953753917-7; 209 - 210.

  296. Authors: Kristina Orehounig, E259 - 3; Ardeshir Mahdavi, E259 - 3; Iva Kovacic, E234 - 2; Alexandros-Athanassi Dimitriou, E311; Christoph Dorn, E311 - FET; Fritz Bleicher, E311 - FET
    Other person involved: IBPC organizing committee, IBPC

    K. Orehounig, A. Mahdavi, I. Kovacic, A. Dimitriou, C. Dorn, F. Bleicher:
    "Concurrent consideration of production processes and building properties for the design of energy-efficient industrial facilities";
    Talk: IBPC 2012 - 5th International Building Physics Conference, Kyoto, Japan; 05-28-2012 - 05-31-2012; in: "Proceedings of the 5th Internaltional Building Physics Conference", IBPC organizing committee (ed.); Organizing Committee of the 5th IBPC., 1/1/Kyoto, Japan (2012), 875 - 881.

    More information

  297. Author: Peter Herbert Osanna, E311 - AuM

    P.H. Osanna:
    "Geometrische Produktspezifikation und Verifikation, Toleranzen, Messgeräte, Werkstükmesstechnik";
    Keynote Lecture: Kvalita a GPS 2005, Brno, CZ; 09-20-2005 - 09-21-2005; in: "Kvalita a GPS 2005", (2005), ISBN: 80-214-3033-8; 9 - 12.

  298. Author: Peter Herbert Osanna, E311 - AuM

    P.H. Osanna:
    "The Fundamental Influence of Education, Training and Certification of Persons Working in Metrology in Industry";
    Keynote Lecture: Metrology in Production Engineering, Augustow, PL; 09-19-2007 - 09-21-2007; in: "METROLOGIA W TECHNIKACH WYTWARZANIA", (2007), 143 - 151.

  299. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM

    P.H. Osanna, M.N. Durakbasa:
    "Artificial Intelligence based Measurement Systems Monitoring and Supervision";
    Talk: Symposium Digest, Cavtat, HR; 10-08-2001 - 10-10-2001; in: "HMD 18th Metrology Symposium", (2001), ISBN: 953-96093-5-6; 4 pages.

  300. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM

    P.H. Osanna, M.N. Durakbasa:
    "Concept for Computer Aided Non-contact Laser Roughness Evaluation of Engineering Surfaces";
    Talk: Tagung, Novosibirsk; 09-12-2002 - 09-17-2002; in: "Laser Metrology Applied to Science, Industry and Everyday Life - LM-2002", (2002), ISBN: 0-8194-4686-6; 708 - 714.

  301. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM
    Other person involved: Hans Wiesner

    P.H. Osanna, M.N. Durakbasa:
    "Geometrical Product Specification and Verification (GPS) for the Analytical Description and Evaluation of Technical Structures of any Kind";
    Talk: ISO TC 4 Symposium, Wien; 09-09-2008; in: "Rolling bearings TC 4 meets GPS TC 213", H. Wiesner (ed.); Austrian Standards plus Publishing ON-V, 1/41/Wien (2008), ISBN: 978-3-85402-167-4; 49 - 55.

  302. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM
    Other person involved: Stanislaw Adamczak

    P.H. Osanna, M.N. Durakbasa:
    "Improvements of Process and Product Quality in Modern Industry, for Every-Day-Life and Bio-Medicine on Basisi of Nanometrology and Nanotechnology";
    Keynote Lecture: Proceedings ICPM 2007 - IV. International Congress on Precision Machining, Sandomierz, PL; 09-25-2007 - 09-27-2007; in: "ICPM 2007", S. Adamczak et al. (ed.); Kielce University of Technology, Kielce, Poland (2007), ISBN: 978-83-88906-91-6; 13 - 21.

  303. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM

    P.H. Osanna, M.N. Durakbasa:
    "Nano metrology as sophisticated metrology in research laboratories and in future industrial quality control laboratories";
    Keynote Lecture: Proceedings CAMET-JM 2006, Casablanca, Marocco; 04-04-2006 - 04-06-2006; in: "Proceedings CAMET-JM 2006", (2006).

  304. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM

    P.H. Osanna, M.N. Durakbasa:
    "Teaching in Quality Science and High Quality Teaching Processes for Higher Education";
    Talk: Graficke Studio, Bratislava, SK; 03-08-2001; in: "Metrological Aspects of the Quality Assurance - Accreditation and Certification in New Millenium", (2001), ISBN: 80-968449-6-2; 117 - 121.

  305. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM

    P.H. Osanna, M.N. Durakbasa:
    "THE IMPORTANCE OF NANOMETROLOGY FOR IMPROVING THE PRODUCT QUALITY IN MODERN INDUSTRY";
    Keynote Lecture: Middle East Measurement and Instrumentation 2006, Bahrain; 05-29-2006 - 05-31-2006; in: "3rd Middle East Metrology Conference and Exhibition", (2006), 1 - 15.

  306. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
    "Modern Production Metrology as Basis of Quality Control and Quality Assurance for the Industry of the 21st Century";
    Talk: Tagungsband, Krakow; 09-25-2003 - 09-27-2003; in: "Metrology in Production Engineering", II / Krakow (2003), ISBN: 83-7242-270-2; 457 - 474.

  307. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
    "Nanotechnologie und Nanometrologie in Maschinenbau und Biomedizin";
    Talk: ÖVE - Schriftenreihe, Wien; 2003; in: "BEITRÄGE DER INFORMATIONSTAGUNG MIKROELEKTRONIK 2003", Eigenverlag des Österreichischen Verbandes für Elektrotechnik, 33 (2003), ISBN: 3-85133-030-7; 19 - 27.

  308. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
    "The Role of Life Cycle Engineering and Modern Metrology for Quality Management Systems in Industry";
    Talk: 11th International CIRP Life Cycle Engineering Seminar ", Beograd; 06-20-2004 - 06-22-2004; in: "Product Life Cycle - Quality Management Issues", (2004), ISBN: 86-903197-4-3; 10 pages.

  309. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Jorge Martin Bauer, E311 - AuM; Lukas Kräuter
    Other person involved: Vidosav D. Majstorovic

    P.H. Osanna, M.N. Durakbasa, J.M. Bauer, L. Kräuter:
    "Global International Cooperation of Collaborating Small and Medium Sized Enterprises to Achieve Total Quality Management";
    Talk: Proceedings Fourth International Working Conference, Belgrad; 05-27-2007 - 05-30-2007; in: "Total Quality Management - Advanced and Intelligent Approaches", V. Majstorovic (ed.); (2007), ISBN: 978-86-7083-594-8; 1 - 6.

  310. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Michael Blaim

    P.H. Osanna, M.N. Durakbasa, M. Blaim:
    "Quality Management at the University";
    Talk: Proceedings of The 4th International Seminar on the Quality Management in Higher Education, Sinaia, Romania; 06-09-2006 - 06-10-2006; in: "QUALITY MANAGEMENT IN HIGHER EDUCATION", Performantica 2006, Iasi (2006), ISBN: 973-730-225-7; 135 - 140.

  311. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Lukas Kräuter

    P.H. Osanna, M.N. Durakbasa, L. Kräuter:
    "Developments in Technology, Sustainability and Medical Engineering on the Basis of Precision and Nano Metrology";
    Talk: The 1st Korean-Austrian Automation Day, Changwon, Korea; 05-11-2006 - 05-13-2006; in: "Automation and Mechatronics", (2006), 111 - 152.

  312. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Lukas Kräuter

    P.H. Osanna, M.N. Durakbasa, L. Kräuter:
    "Education of Metrologists as Qualified Personnel in Austria";
    Talk: Tagungsband Zhromeadenia KZ SR, Strbske Pleso; 10-16-2006 - 10-17-2006; in: "Sammelwerk der XXV. Tagung für Metrologie", (2006), 39 - 45.

  313. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Lukas Kräuter

    P.H. Osanna, M.N. Durakbasa, L. Kräuter:
    "Entwicklungstendenzen in der Längenmesstechnik für die Qualitätskontrolle";
    Keynote Lecture: 18. mezinarodni seminar, Plzen - Czech Republic; 03-18-2009 - 03-19-2009; in: "Merici technika pro kontrolu jakosti", Ceska metrologicka spolecnost, Ko 417-09, Plzen (2009), 97 - 113.

  314. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Lukas Kräuter

    P.H. Osanna, M.N. Durakbasa, L. Kräuter:
    "Produktionsmesstechnik und Qualitätsmanagement - Messung der Qualität - Qualität der Messung";
    Keynote Lecture: Tagungsband, Plzen; 03-13-2007 - 03-14-2007; in: "MERICI TECHNIKA PRO KONTROLU JAKOSTI", Technicky Tydenik, S 380 - 07, Praha (2007), 139 - 144.

  315. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Lukas Kräuter

    P.H. Osanna, M.N. Durakbasa, L. Kräuter:
    "PRODUKTIONSMESSTECHNIK VOM BLICKPUNKT DER INTERNATIONALEN QUALITÄTSMANAGEMENTNORMEN EN/ISO 9000:2000 AUS GESEHEN";
    Keynote Lecture: MERICI TECHNIKA PRO KONTROLU JAKOSTI, PLZEN; 03-01-2006 - 03-02-2006; in: "Proceedings", (2006), 7 - 22.

  316. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Lukas Kräuter
    Other persons involved: Ion Gh. Rosca; Albert Weckenmann; Peter Herbert Osanna, E311 - AuM; Sorin Popescu; Marieta Olaru; Carmen Paunescu

    P.H. Osanna, M.N. Durakbasa, L. Kräuter:
    "Quality and Quality Assurance in European Higher Education";
    Keynote Lecture: International Conference on QUALITY - INNOVATION - EUROPEAN INTEGRATION, Sibiu, RO; 09-18-2008 - 09-20-2008; in: "QIEI 2008", I. Rosca, A. Weckenmann, P.H. Osanna, S. Popescu, M. Olaru, C. Paunescu (ed.); (2008), 3 901888 41 3.

  317. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Lukas Kräuter

    P.H. Osanna, M.N. Durakbasa, L. Kräuter:
    "VZDELAVANIE METROLOGOV AKO KVALIFIKOV ANEHO PERSONALU RAKUSKU";
    Talk: XXV. ZHROMAZDENIA KZ SR, Strbske Pleso, SK; 10-16-2006 - 10-17-2006; in: "ZBORNIK PREDNASOK ZO SEMINARA", (2006), 46 - 52.

  318. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Lukas Kräuter; Erol Güclü, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, L. Kräuter, E. Güclü:
    "A Modern Scheme for Education, Training and Certification";
    Keynote Lecture: MEASUREMENT SCIENCE REVIEW, SK; 05-20-2007 - 05-24-2007; in: "MEASUREMENT SCIENCE REVIEW 2007", (2007), ISBN: 978-80-969672-0-9; 3 - 9.

  319. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Anil Nomak Akdogan; A. J. Bauer; Lukas Kräuter

    P.H. Osanna, M.N. Durakbasa, N. Nomak Akdogan, A. Bauer, L. Kräuter:
    "Intelligent Metrology and total Quality Management for the Realisation of Advanced Flexible Disassembly and Recyling of Used Goods for Everyday Life";
    Keynote Lecture: Tagungsband, Senec, SK; 06-26-2007 - 06-28-2007; in: "TOP 2007 - ENGINEERING OF ENVIRONMENT PROTECTION", Publishing House of Slovak University of Technology, Bratislava, Slovak Republic (2007), ISBN: 978-80-227-2693-1; 257 - 262.

  320. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Halima Tahirova, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, H. Tahirova:
    "END OF LIFE MANAGEMENT AND RECYCLING IN THE CAR INDUSTRIES";
    Talk: IN-TECH-ED 2005, Baku; 06-01-2005 - 06-03-2005; in: "PROCEEDINGS OF THE EIGHT BAKU INTERNATIONAL CONGRESS "ENERGY, ECOLOGY, ECONOMY"", (2005), 673 - 677.

    More information

  321. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Halima Tahirova, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, H. Tahirova:
    "TQM and Environmental Management Supported by Semi Automated Disassembly";
    Talk: International Conference Modern Technologies in Manufacturing, Cluj-Napoca, RO; 10-06-2005 - 10-08-2005; in: "ANNALS OF MTeM FOR 2005 & PROCEEDINGS", (2005), ISBN: 973-9087-83-3; 313 - 316.

  322. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Halima Tahirova, E311 - AuM; Ilknur Cavusoglu

    P.H. Osanna, M.N. Durakbasa, H. Tahirova, I. Cavusoglu:
    "END OF LIFE MANAGEMENT AND RECYCLING IOF USED PRODUCTS IN THE EUROPEAN INDUSTRIES";
    Keynote Lecture: Tagungsband TOP 2005, Casta Papiernicka - SK; 06-30-2005 - 07-01-2005; in: "TOP 2005", (2005), ISBN: 80-227-2249-9; II-1 - II-7.

  323. Authors: Peter Herbert Osanna, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Kambiz Yaghmaei; Ali Afjehi-Sadat, E311 - AuM

    P.H. Osanna, M.N. Durakbasa, K. Yaghmaei, A. Afjehi-Sadat:
    "NANOMETROLOGY - TODAY IN SCIENTIFIC HIGH TECHNOLOGY DEVELOPMENT AND RESEARCH LABORATORIES - TOMORROW IN QUALITY CONTROL DEPARTMENTS OF MODERN PRODUCTION PLANTS";
    Talk: Proceedings of the IMEKO TC 11 Metrological Infrastructure, Opatija, Kroatien; 09-26-2005 - 09-28-2005; in: "19th International Metrology Symposium", Metrology Consulting, 450916045/Zagreb (2005), ISBN: 953-95179-0-7; 149 - 155.

  324. Authors: Peter Herbert Osanna, E311 - AuM; Helmar Weseslindtner, E311; M. Numan Durakbasa, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM

    P.H. Osanna, H. Weseslindtner, M.N. Durakbasa, A. Afjehi-Sadat:
    "Intelligent Metrology, Quality Assurance and Quality Management as Basis for Technical Diagnostics in Global Competitive Production";
    Talk: Proceedings of the 10th IMEKO TC10 International Conference, Budapest, Hungary; 06-09-2005 - 06-10-2005; in: "10th IMEKO TC10 International Conference on Technical Diagnostics", (2005), ISBN: 9638658649; 81 - 86.

  325. Authors: Peter Herbert Osanna, E311 - AuM; Helmar Weseslindtner, E311; M. Numan Durakbasa, E311 - AuM; Halima Tahirova, E311 - AuM; Ali Afjehi-Sadat, E311 - AuM

    P.H. Osanna, H. Weseslindtner, M.N. Durakbasa, H. Tahirova, A. Afjehi-Sadat:
    "TQM, LCA and Sustainability in European Industry Supported by Intelligent Flexible Disassembly and Recycling of Used Products";
    Talk: IN-TECH-ED 2005, Budapest; 09-08-2005 - 09-09-2005; in: "Innovation-Technics-Education", BUDAPEST TECH, (2005), ISBN: 9639397067; 312 - 318.

  326. Authors: Rok Petkovsek, University Ljubljana; Vid Agrez; Ferdinand Bammer, E311 - LLU

    R. Petkovsek, V. Agrez, F. Bammer:
    "Gain-Switching of a Fiber Laser: Experiment and a Simple Theoretic Model";
    Talk: Photonics Europe 2010, Brüssel; 04-12-2010 - 04-16-2010; in: "Solid State Lasers and Amplifiers IV, and High-Power Lasers", SPIE Proceedings, Vol. 7721 (2010), ISBN: 978-0-8194-8194-8; 77210L-1 - 77210L-6.

    More information

  327. Authors: Konrad Pfadenhauer, E311 - RIF; Schahram Dustdar, E184 - 1; Burkhard Kittl, E311 - RIF

    K. Pfadenhauer, S. Dustdar, B. Kittl:
    "Challenges and Solutions for Model Driven Web Service Composition";
    Talk: 3rd International Workshop on Distributed and Mobile Collaboration (DMC), Linköping, Schweden; 06-13-2005 - 06-15-2005; in: "3rd International Workshop on Distributed and Mobile collaboration (DMC)", IEEE Computer Society, (2005).

    More information

  328. Authors: Konrad Pfadenhauer, E311 - RIF; Schahram Dustdar, E184 - 1; Burkhard Kittl, E311 - RIF

    K. Pfadenhauer, S. Dustdar, B. Kittl:
    "Comparison of Two Distinctive Model Driven Web Service Orchestration Proposals";
    Talk: Seventh IEEE International Conference on E-Commerce Technology Workshops, München (invited); 07-19-2005; in: "Workshops of CEC 2005 Seventh IEEE International Conference on E-Commerce Technology Workshops", IEEE Computer Society Press, (2005), ISBN: 0-7695-2384-6; 29 - 36.

    More information

  329. Authors: Konrad Pfadenhauer, E311 - RIF; Burkhard Kittl, E311 - RIF
    Other person involved: Branko Katalinic, E311 - IMS

    K. Pfadenhauer, B. Kittl:
    "Flexibility in the Shop Floor by Means of a Model Driven Architecture";
    Talk: 15th International DAAAM Symposium, Vienna; 11-03-2004 - 11-06-2004; in: "Annals of DAAAM for 2004 & Proceedings of the 15th International DAAAM Symposium", B. Katalinic (ed.); DAAAM Inernational Vienna, (2004), ISBN: 3-901509-42-9; 353 - 354.

    More information

  330. Authors: Konrad Pfadenhauer, E311 - RIF; Burkhard Kittl, E311 - RIF

    K. Pfadenhauer, B. Kittl:
    "Modeling the shop floor for a SOA with UML";
    Talk: 1st International Conference on Enterprise Systems and Accounting, Thessaloniki; 09-03-2004 - 09-04-2004; in: "Proceedings of the 1st International Conference on Enterprise Systems and Accountimg", (2004), 17 pages.

    More information

  331. Authors: Konrad Pfadenhauer, E311 - RIF; Burkhard Kittl, E311 - RIF

    K. Pfadenhauer, B. Kittl:
    "Why model driven service orientation is the future of shop floor integration";
    Talk: Comment 2005 Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice (invited); 05-16-2005 - 05-19-2005; in: "Comment 2005 Worldwide Congress on Materials and Manufacturing Engineering and Technology", (2005), 4 pages.

    More information

  332. Authors: Konrad Pfadenhauer, E311 - RIF; Burkhard Kittl, E311 - RIF; Schahram Dustdar, E184 - 1
    Other persons involved: Schahram Dustdar, E184 - 1; Johann Eder

    K. Pfadenhauer, B. Kittl, S. Dustdar:
    "Shop Floor Information Management and SOA";
    Talk: BPM 2006, Wien, Österreich; 09-04-2006; in: "Business Process Management Workshops", S. Dustdar, J. Eder (ed.); Springer, LNCS 4103 (2006), ISBN: 3-540-38444-8; 237 - 248.

    More information

  333. Authors: K Placko; Branko Katalinic, E311 - IMS

    K. Placko, B. Katalinic:
    "Position or Speed Control of Hydraulic Actuators of Industrial Robots";
    Talk: 2nd Yugoslav Symposium on Applied Robotics, Portoroz; 06-15-1981 - 06-17-1981; in: "Proc. 2nd Yugoslav Symposium on Applied Robotics", (1981), 309 - 311.

  334. Authors: Miroslav Plancak; Dejan Movrin; Zlatan Car; M. Numan Durakbasa, E311 - AuM; Dragisa Vilotic
    Other persons involved: Zlatan Car; Jan Kudlacek; Tibor Szalay

    M. Plancak, D. Movrin, Z. Car, M.N. Durakbasa, D. Vilotic:
    "Orbital Forging of Cross Joint Component";
    Keynote Lecture: International Conference on Innovative Technologies, Budapest; 09-10-2013 - 09-13-2013; in: "IN-TECH2013", Z. Car, J. Kudlacek, T. Szalay (ed.); Tiskara Susak d.o.o., 1 (2013), ISBN: 978-953-6326-88-4; 265 - 268.

  335. Authors: Peter Pongratz, E138; Gerhard Liedl, E311 - LLU

    P. Pongratz, G. Liedl et al.:
    "TEM and SIMS study of silicon implanted with phosphorus and boron";
    Talk: Proc. of the Royal Microscopical Society Conference, Bristol/UK; 1989; in: "Proc. of the Royal Microscopical Society Conference", (1989), 513 - 518.

  336. Authors: Robert Pospichal, E311 - LLU; Robert Bielak, E311 - LLU; Gerhard Liedl, E311 - LLU

    R. Pospichal, R. Bielak, G. Liedl:
    "SCWTEX - Simultaneous Cutting and Welding of Textiles";
    Talk: MOTSP 2011, Bol, Island Brac; 06-08-2011 - 06-10-2011; in: "Proceedings of the 3rd International Scientific Conference Management of Technology Step to Sustainable Production", (2011), ISBN: 978-953-7738-10-5; 368 - 374.

    More information

  337. Authors: Robert Pospichal, E311 - LLU; Gerhard Liedl, E311 - LLU

    R. Pospichal, G. Liedl:
    "Fabrication of Periodic Nanostructures by Multi-Beam Interference Using an Ultra-Short Pulse Laser";
    Talk: MOTSP 2012, Zadar, Kroatien; 06-14-2012 - 06-16-2012; in: "MOTSP 2012 - Proceedings of the 4th International Scientific Conference Management of Technology Step to Sustainable Production", Croatian Association for PLM, 4 (2012), ISSN: 1847-6880; 328 - 335.

    More information

  338. Authors: Robert Pospichal, E311 - LLU; Gerhard Liedl, E311 - LLU

    R. Pospichal, G. Liedl:
    "Laser Processing Of Non-Woven Fabrics";
    Talk: Management of Technology - Step to Sustainable Production: MOTSP2013, Novi Vinodolski, Croatia; 05-29-2013 - 05-31-2013; in: "MOTSP 2013 - Conference Proceedings", Croatian Association for PLM, Zagreb, Croatia (2013), ISSN: 1848-9591; Paper ID 169, 8 pages.

    More information

  339. Authors: Mahdi Rahmani, E 311; Reinhard Zisser-Pfeifer, E311 - FET; Stephan Krall, E311; Fritz Bleicher, E311 - FET

    M. Rahmani, R. Zisser-Pfeifer, S. Krall, F. Bleicher:
    "Experimental Investigation of static stiffness and friction behavior of ball bearing linear motion guides";
    Poster: 31st Danubia-Adria Symposium on Advances in Experimental Mechanics, Kempten (invited); 09-24-2014 - 09-27-2014; in: "31st Danubia-Adria Symposium on Advances in Experimental Mechanics", VDI Verein Deutscher Ingenieure e.V., (2014), ISBN: 978-3-00-046740-0; 207 - 208.

  340. Authors: Martin Reiter, PEC; Fritz Bleicher, E311 - FET
    Other person involved: Fritz Bleicher, E311 - FET

    M. Reiter, F. Bleicher:
    "Relevante SOPs in Apotheken";
    Talk: Reinraumtechniktag 2008, Austria Trend Hotel "Savoyen" (invited); 10-09-2008; in: "Reinraumtechniktag 2008", F. Bleicher (ed.); (2008).

    More information

  341. Authors: Martin Resch; Dieter Schuöcker, E311 - LLU

    M. Resch, D. Schuöcker et al.:
    "Fundamental Investigations of the Blown Powder Process";
    Talk: Proceedings of the 3rd LANE 2001, Erlangen/Germany; 08-28-2001 - 08-31-2001; in: "Proceedings LANE", Meisenbach Bamberg, (2001), ISBN: 3-87525-154-7; 353 - 362.

  342. Authors: Martin Resch; Dieter Schuöcker, E311 - LLU

    M. Resch, D. Schuöcker et al.:
    "Laser-assisted generation of three-dimensional parts by the blown powder process";
    Talk: GCL/HPL, Florenz/Italien; 2000; in: "Proceedings of the 13th Int. GCL/HPL", (2000).

  343. Authors: Martin Resch; Dieter Schuöcker, E311 - LLU

    M. Resch, D. Schuöcker et al.:
    "Process Control and Further Improvements for the Blown Powder Process";
    Talk: ICALEO 2001, Florida/USA (invited); 2001; in: "Proceedings ICALEO", (2001).

  344. Authors: Martin Resch; Dieter Schuöcker, E311 - LLU

    M. Resch, D. Schuöcker et al.:
    "The Blown Powder Process-A promising Method of laser assisted Rapid Prototyping";
    Talk: ICIT - International Conference on Industrial Tools, Rogaska Slatina-Celje/ Slowenien; 04-22-2001 - 04-26-2001; in: "Proceedings ICIT", (2001), ISBN: 961-90401-5-5; 277 - 280.

    More information

  345. Authors: Martin Resch; Christian Zeinar; Dieter Schuöcker, E311 - LLU

    M. Resch, C. Zeinar, D. Schuöcker:
    "Laser Augmented 3-D Shaping";
    Talk: LTLA - Int. Conf. Laser Technology and Laser Application, St. Peterburg/Russia (invited); 2000; in: "Proceedings LTLA", (2000), 3 - 15.

  346. Authors: Matthias Rößler, E183 - 1; Michael Landsiedl; Fritz Bleicher, E311 - FET; Christian Salvatori, E311; Wolfgang Kastner, E183 - 1; Felix Breitenecker, E101 - 6

    M. Rößler, M. Landsiedl, F. Bleicher, C. Salvatori, W. Kastner, F. Breitenecker:
    "Studies on the Thermodynamical Coupling of a Machine Tool and its Environment using the Object-oriented Modelling Approach of Modelica";
    Talk: European Modeling and Simulation Symposium, Wien; 09-19-2012 - 09-21-2012; in: "Proceedings of the European Modeling and Simulation Symposium", (2012), ISBN: 978-88-97999-01-0; 434 - 439.

    More information

  347. Authors: Binnur Sagbas; M. Numan Durakbasa, E311 - AuM

    B. Sagbas, M.N. Durakbasa:
    "Determining frictional behavior of vitamin e blended Uhmwpe";
    Talk: IMEKO XX World Congress International Measurement Confederation, Busan, Korea; 09-09-2012 - 09-14-2012; in: "Proceedings of XX IMEKO World Congress International Measurement Confederation", (2012), ISBN: 978-89-950000-5-2; 6 pages.

    More information

  348. Authors: Binnur Sagbas; M. Numan Durakbasa, E311 - AuM

    B. Sagbas, M.N. Durakbasa:
    "Optimization of Frictional Heating Parameters of Artificial Joint Materials by Taguchi Approach";
    Talk: 12th IMEKO TC10 Workshop on Technical Diagnostics, Florence; 06-06-2013 - 06-07-2013; in: "New Perspectives in Measurements, Tools and Techniques for Industrial Applications", IMEKO - International Measurement Confederation, University of Florence, (2013), ISBN: 978-88-903149-8-8; 96 - 101.

  349. Authors: Kurt Schröder, E311 - LLU; Karl Schulmeister; Gerhard Liedl, E311 - LLU

    K. Schröder, K. Schulmeister, G. Liedl:
    "UV-radiation induced ozone and nitrogen oxide emission during CO2 laser welding";
    Talk: Laser Safety Forum, Copenhagen; 1995; in: "Proc. of the Int. Laser Safety Forum 95", (1995), 305 - 311.

  350. Authors: Karl Schulmeister; Christian Schmitzer; Karl Duftschmid; Gerhard Liedl, E311 - LLU

    K. Schulmeister, C. Schmitzer, K. Duftschmid, G. Liedl et al.:
    "Hazardous Ultraviolet an Blue-Light Emissions of CO2 Laser Beam Welding";
    Talk: Proceedings Laser Safety, Orlando/USA; 1997; in: "Proceedings International. Laser Safety", (1997).

  351. Authors: Karl Schulmeister; Christian Schmitzer; Karl Duftschmid; Gerhard Liedl, E311 - LLU; Kurt Schröder, E311 - LLU; Dieter Schuöcker, E311 - LLU

    K. Schulmeister, C. Schmitzer, K. Duftschmid, G. Liedl, K. Schröder, D. Schuöcker:
    "Secondary Hazards of High Power Laser Beam Welding";
    Talk: Proceedings Portoroz, Portoroz (invited); 1995; in: "Proceedings Portoroz", (1995).

    More information

  352. Authors: Thomas Schumi, E311 - LLU; Ferdinand Bammer, E311 - LLU; Dieter Schuöcker, E311 - LLU; Gerald Humenberger, E311 - LLU

    T. Schumi, F. Bammer, D. Schuöcker, G. Humenberger:
    "Laser-Assisted Bending: A Tool For Brittle Materials";
    Talk: UMTIK 2010: 14th International Conference on Machine Design and Production, Güzelyurt, Zypern; 06-29-2010 - 07-02-2010; in: "Proceeding UMTIK 2010", METU-Ankara, Vol. 2, Ankara (2010), ISBN: 978-975-429-282-4; 743 - 753.

    More information

  353. Authors: Thomas Schumi, E311 - LLU; Ferdinand Bammer, E311 - LLU; Dieter Schuöcker, E311 - LLU; Gerald Humenberger, E311 - LLU; Bernhard Holzinger, E311 - LLU

    T. Schumi, F. Bammer, D. Schuöcker, G. Humenberger, B. Holzinger:
    "Integration of high power lasers in bending tools";
    Talk: Laser Assisted Net Shape Engineering, Erlangen (invited); 09-21-2010 - 09-24-2010; in: "Proceedings of the LANE 2010", Elsevier, Physics Procedia Vol.5, Part 2 (2010), ISSN: 1875-3892; 205 - 209.

    More information

  354. Author: Dieter Schuöcker, E311 - LLU

    D. Schuöcker:
    "A Feasible Concept for a 100 kW cw CO2 Laser Based on an Existing 6 kW Device";
    Talk: SPIE Conf. on High Power Laser Ablation IV-HPLA, Taos/USA (invited); 04-25-2004 - 04-30-2004; in: "Proceedings SPIE", SPIE, 5448 (2004), ISBN: 0-8194-5371-4; 393 - 404.

    More information

  355. Author: Dieter Schuöcker, E311 - LLU

    D. Schuöcker:
    "Laser assisted forming";
    Talk: Proceedings of SPIE, Sante Fe/USA (invited); 04-24-2000 - 04-28-2000; in: "SPIE Conf. on High Power Laser Ablation III-HPLA", 4065 (2000), ISBN: 0-8194-3700-x; 117 - 127.

  356. Author: Dieter Schuöcker, E311 - LLU

    D. Schuöcker:
    "Laser Assisted Forming - a valuable extension of the limits of metal shaping";
    Talk: LANE 2004, Erlangen (invited); 09-21-2004 - 09-24-2004; in: "Proceedings of the 4th LANE", Meisenbach Bamberg, (2004), ISBN: 3-87525-202-0; 21 - 35.

  357. Authors: Dieter Schuöcker, E311 - LLU; Ferdinand Bammer, E311 - LLU; Robert Bielak, E311 - LLU; Georg Schuöcker, E311 - LLU

    D. Schuöcker, F. Bammer, R. Bielak, G Schuöcker:
    "Virtual Experiments, a Promising Application of Theoretical Modelling";
    Talk: 1st Pacific International Conference on Applications of Lasers and Optics, Melbourne/Australia; 04-19-2004 - 04-21-2004; in: "Proceedings PICALO", LIA, (2004), ISBN: 0-912035-76-5.

    More information

  358. Authors: Dieter Schuöcker, E311 - LLU; Ferdinand Bammer, E311 - LLU; Thomas Schumi, E311 - LLU; Bernhard Holzinger, E311 - LLU
    Other person involved: C.R. Phipps

    D. Schuöcker, F. Bammer, T. Schumi, B. Holzinger:
    "Forming of Brittle Materials - A New and Valuable Application of Diode Lasers";
    Talk: International Symposium on High Power Laser Ablation 2010, Santa Fee, New Mexico, USA (invited); 04-18-2010 - 04-22-2010; in: "International Symposium on High Power Laser Ablation 2010", C.R. Phipps (ed.); INTERNATIONAL SYMPOSIUM ON HIGH POWER LASER ABLATION 2010. AIP Conference Proceedings, Volume 1278 (2010), ISBN: 978-0-8194-7207-6; 881 - 890.

    More information

  359. Authors: Dieter Schuöcker, E311 - LLU; Bernhard Holzinger, E311 - LLU

    D. Schuöcker, B. Holzinger:
    "CO2 Laser with 65MW pulses and 100kW power, concept and first steps of development";
    Talk: High Power Laser Ablation HPLA, Taos, New Mexico, USA (invited); 04-20-2008 - 04-24-2008; in: "High-Power Laser Ablation VII", SPIE, Volume 7005 (2008), ISBN: 978-0-8194-7207-6; 12 pages.

    More information

  360. Authors: Dieter Schuöcker, E311 - LLU; Alexander Kaplan; Gerhard Liedl, E311 - LLU

    D. Schuöcker, A. Kaplan, G. Liedl et al.:
    "Experimental and Theoretical Studies of Laser Welding";
    Talk: Advaīnces in Automotive and Transportation Technology and Practice for the 21th Century, Wien/Austria; 06-14-1999 - 06-18-1999; in: "Materials for Energy-Efficient Vehicles", (1999), 399 - 407.

  361. Authors: Dieter Schuöcker, E311 - LLU; Alexander Kratky, E311 - LLU; Ferdinand Bammer, E311 - LLU; Gerhard Liedl, E311 - LLU; Bernhard Holzinger, E311 - LLU

    D. Schuöcker, A. Kratky, F. Bammer, G. Liedl, B. Holzinger:
    "Laser Assisted Forming";
    Talk: ICALEO 2003 - Int. Congress on Applications of Lasers & Electro-Optics, Jacksonville; 10-13-2003 - 10-16-2003; in: "Proceedings", (2003).

    More information

  362. Authors: Dieter Schuöcker, E311 - LLU; Alexander Kratky, E311 - LLU; Ferdinand Bammer, E311 - LLU; Gerhard Liedl, E311 - LLU; Bernhard Holzinger, E311 - LLU

    D. Schuöcker, A. Kratky, F. Bammer, G. Liedl, B. Holzinger:
    "New and Forthcoming Application of High Power Lasers: LASER ASSISTED FORMING";
    Talk: LTLA - Int. Conf. Laser Technology and Laser Application, St. Petersburg (invited); 2003; in: "Laser Technology and Laser Applications", (2003).

  363. Authors: Dieter Schuöcker, E311 - LLU; Alexander Kratky, E311 - LLU; Bernhard Holzinger, E311 - LLU

    D. Schuöcker, A. Kratky, B. Holzinger:
    "Laser assisted forming";
    to be given as keynote lecture at: IX International Conference "Laser and Laser-Information Techologies: Fundamental Problems & Applications & V International Symposium Laser Technologies and Lasers, Smolyan, Bulgaria (invited); 10-04-2006 - 10-07-2006; in: "Proceedings", (2006).

  364. Authors: Dieter Schuöcker, E311 - LLU; Gerhard Liedl, E311 - LLU; Alexander Kratky, E311 - LLU

    D. Schuöcker, G. Liedl, A. Kratky:
    "Laser assisted forming - a promising new application of high power lasers";
    Talk: Proceedings M4PL16, Igls/Austria; 01-22-2003 - 01-24-2003; in: "Proc. of the 16th neeting on modelling - simulation virtuality in high power laser technology", (2003).

  365. Authors: Dieter Schuöcker, E311 - LLU; Christian Zeinar

    D. Schuöcker, C. Zeinar et al.:
    "Laser Assisted Bending";
    Talk: Proceedings of the 3rd LANE 2001, Erlangen/Germany; 08-28-2001 - 08-31-2001; in: "Proceedings LANE", (2001), ISBN: 3-87525-154-7; 475 - 482.

    More information

  366. Authors: Georg Schuöcker, E311 - LLU; Robert Bielak, E311 - LLU

    G Schuöcker, R. Bielak:
    "Laser Ablation and Competitive Technologies in Paint Stripping of heavy anti-corrosion Coatings";
    accepted as poster for: GCL/HPL, Gmunden, Austria; 09-23-2006 - 09-27-2006; in: "Proceedings SPIE", (2006).

  367. Authors: Franz Sienel, PEC; Fritz Bleicher, E311 - FET
    Other person involved: Fritz Bleicher, E311 - FET

    F. Sienel, F. Bleicher:
    "Neues im GAMP5";
    Talk: Reinraumtechniktag 2008, Austria Trend Hotel "Savoyen"; 10-09-2008; in: "Reinraumtechniktag 2008", F. Bleicher (ed.); (2008).

    More information

  368. Authors: Wilfried Sihn, E330 - 2(BT); Fritz Bleicher, E311 - FET; Detlef Gerhard, E307 - 5
    Other persons involved: Wilfried Sihn, E330 - 2(BT); Andreas Jäger, E330

    W. Sihn, F. Bleicher, D. Gerhard:
    "Vision and implementation of the Learning and Innovation Factory of the Vienna University of Technology";
    Talk: 2nd Conference on Learning Factories, Wien; 05-10-2012; in: "Competitive production in Europe through education and training", W. Sihn, A. Jäger (ed.); (2012), 160 - 177.

  369. Authors: Anton Siller; Christoph Pollak, E164 - AC; Andreas Steininger, E311; Fritz Bleicher, E311 - FET; Nicolas Jochum

    A. Siller, C. Pollak, A. Steininger, F. Bleicher, N. Jochum:
    "Interdependence of the coolant quality and the formation of a tribochemical";
    Keynote Lecture: 31st Danubia-Adria Symposium on Advances in Experimental Mechanics, Kempten (invited); 09-24-2014 - 09-27-2014; in: "31st Danubia-Adria Symposium on Advances in Experimental Mechanics", VDI Verein Deutscher Ingenieure e.V., Düsseldorf (2014), ISBN: 978-3-00-046740-0; 39 - 40.

  370. Authors: Matthias Stark, E311; Christoph Dorn, E311 - FET; Fritz Bleicher, E311 - FET

    M. Stark, C. Dorn, F. Bleicher:
    "Energetic Comparison of Machine Tools";
    Talk: Junior Scientist Conference 2010, Vienna University of Technology; 04-07-2010 - 04-09-2010; in: "Proceedings of the Junior Scientist Conference 2010", (2010), ISBN: 978-3-200-01797-9.

  371. Authors: Christian Stocker; R Sonnleitner; G.E. Nauer; Cecilia Poletti, E308 - D; Ali Afjehi-Sadat, E311 - AuM
    Other person involved: Mathias Göken

    C. Stocker, R. Sonnleitner, G. Nauer, C. Poletti, A. Afjehi-Sadat:
    "Ionenätzen zur metallographischen Präparation von Metallen";
    Talk: 39. Metallographie-Tagung 2005, Erlangen; 09-14-2005 - 09-16-2005; in: "Fortschritte in der Metallographie. Sonderbände d. prakt. Metallographie, Band 37", M. Göken (ed.); (2005), ISBN: 3-88355-343-3; 161 - 166.

  372. Authors: Markus Stopper, E311-IMS; Berislav Ljoljic, E311 - IMS; Kemajl Stuja, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    M. Stopper, B. Ljoljic, K. Stuja:
    "Basic for an Interactive Desktop Training System (IDTS) in the Field of Mechatronic";
    Talk: 13th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Learning from Nature', Vienna; 10-23-2002 - 10-26-2002; in: "Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium", B. Katalinic (ed.); DAAAM International Vienna, Vienna (2002), ISBN: 3-901509-29-1; 543 - 544.

  373. Authors: Ken J. Stout; M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM
    Other persons involved: L. Blunt; B.G. Rosen; T. Thomas; D. Whitehouse

    K.J. Stout, M.N. Durakbasa, P.H. Osanna:
    "Quality Assurance - Have We Specified it the Wrong Way Round?";
    Talk: Proceedings of the 11th International Conference on Metrology & Properties of Engineering Surfaces, Huddersfield, UK; 07-17-2007 - 07-20-2007; in: "Metrology & Properties of Engineering Surfaces", L. Blunt, B. Rosen, T. Thomas, D. Whitehouse (ed.); The University of Huddersfield, Huddersfield (2007), ISBN: 978-1-86218-057-4; ## - ##.

  374. Author: Kemajl Stuja, E311 - IMS

    K. Stuja:
    "Die Optimierung von Fertigungsabläufen innerhalb eines flexiblen Fertigungssystems für Drehteile bei beschränkter Anzahl der Fertigungsmittel ";
    Talk: Institut für Fertigungstechnik, Wien; 06-12-2002; in: "Dissertation", (2002), 1 - 138.

  375. Authors: Kemajl Stuja, E311 - IMS; Branko Katalinic, E311 - IMS; S Pllana; Vedran Kordic, E311 - IMS
    Other person involved: Branko Katalinic, E311 - IMS

    K. Stuja, B. Katalinic, S. Pllana, V. Kordic:
    "FMSIM: An Integrated Environment for Scheduling of a Complex FMS";
    Talk: 12 International DAAAM Symposium, Jena, Germany, 24-27 October 2001, Jena, Germany; 10-24-2001 - 10-27-2001; in: "Annals of DAAAM for 2001 & Proceedings of 12th DAAAM International Symposium", B. Katalinic (ed.); DAAAM International Vienna, (2001), ISBN: 3-901509-19-4; 465 - 466.

  376. Authors: Toma Udiljak; Branko Katalinic, E311 - IMS

    T. Udiljak, B. Katalinic:
    "monitoring and Diagnostics of Machinig Systems and Machining Processes ";
    Talk: 14th European Maintenance Conference "Euromaintenance '98", Dubrovnik; 10-05-1998 - 10-07-1998; in: "Proceedings of 14th European Maintenance Conference "Euromaintenance '98"", (1998), 451 - 461.

  377. Authors: Toma Udiljak; Branko Katalinic, E311 - IMS

    T. Udiljak, B. Katalinic:
    "Monitorizacion y diagnostico de sistemas de mecanizado y procesos de mecanizado";
    Talk: Gestion de activos industriales, Vol 3, Madrid; 1999; in: "Gestion de activos industriales, Vol 3", (1999), 69 - 76.

  378. Authors: K Velisek; Branko Katalinic, E311 - IMS

    K. Velisek, B. Katalinic:
    "Design Methodology of Scheduling Strategies and Scenarios of Complex Flexible Systems";
    Talk: MTF Trnava of Slovak Technical University Bratislava, Trnava; 1997; in: "Scientific Works of MTF Trnava of Slovak Technical University Bratislava", (1997), 71 - 80.

  379. Authors: K Velisek; Branko Katalinic, E311 - IMS; Eva Hruskova
    Other person involved: Branko Katalinic, E311 - IMS

    K. Velisek, B. Katalinic, E Hruskova:
    "The Base Conditions of Mulitspindle Head Design";
    Talk: 14th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Reconstruction and Development', Sarajevo (invited); 10-22-2003 - 10-25-2003; in: "Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium", B. Katalinic (ed.); DAAAM International Vienna, Vienna (2003), ISBN: 3-901-509-34-8; 481 - 482.

  380. Authors: K Velisek; Branko Katalinic, E311 - IMS; P Kostal

    K. Velisek, B. Katalinic, P. Kostal:
    "Structure of Information for technological Parameters";
    Talk: DAAAM for 1998& Proceedings of 9th International DAAAM Symposium, Cluj-Napoca; 10-22-1998 - 10-24-1998; in: "Annals of DAAAM for 1998& Proceedings of 9th International DAAAM Symposium", (1998), 491 - 492.

  381. Authors: Albert Weckenmann; M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM

    A. Weckenmann, M.N. Durakbasa, P.H. Osanna:
    "Ausbildung in der Koordinatenmesstechnik";
    Talk: Kvalita a GPS 2005, Brno, CZ; 09-20-2005 - 09-21-2005; in: "Kvalita a GPS 2005", (2005), ISBN: 80-214-3033-8; 35 - 40.

  382. Authors: Wendelin Weingartner; Kurt Schröder, E311 - LLU; Dieter Schuöcker, E311 - LLU

    W. Weingartner, K. Schröder, D. Schuöcker:
    "Optical Distance Monitoring System for Laser Materials Processing";
    Talk: Proceedings of the 3rd LANE 2001, Erlangen/Germany; 08-28-2001 - 08-31-2001; in: "Proceedings LANE", (2001), ISBN: 3-87525-154-7; 709 - 716.

  383. Authors: Vladislav Yakovlev; Ferdinand Bammer, E311 - LLU; Olga Smirnova, E387; Armin Scrinzi, E387

    V. Yakovlev, F. Bammer, O. Smirnova, A. Scrinzi:
    "Direct reconstruction of electron release dynamics from attosecond streaking measurement";
    Talk: 13th International Laser Physics Workshop, Trieste, Italy; 07-12-2004 - 07-16-2004; in: "Book of Abstracts", (2004), 78.

  384. Authors: R. Yigit; I. Birlik; N.F. Ak Azem; O. Bardakcioglu; M. Numan Durakbasa, E311 - AuM; Erdal Celik

    R. Yigit, I. Birlik, N. Ak Azem, O. Bardakcioglu, M.N. Durakbasa, E. Celik:
    "Investigation Of The Minimum Quantity Lubrication Grinding Using Nanofluids";
    Talk: Proceedings of ICPR-AEM and QIEM 2014 Conference, Cluj-Napoca, Rumänien; 07-01-2014 - 07-05-2014; in: "2014 INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH - REGIONAL CONFERENCE AFRICA, EUROPE AND THE MIDDLE EAST and 3rd INTERNATIONAL CONFERENCE ON QUALITY AND INNOVATION IN ENGINEERING AND MANAGEMENT", Technical University of Cluj- Napoca (2014), ISBN: 978-973-662-978-5; 4 pages.

    More information

  385. Author: Richard Zemann, E311 - FET

    R. Zemann:
    "Weight-loss potential of composite spring elements";
    Talk: Transportation weight loss diet conference 2013, Stuttgart (invited); 06-05-2013 - 06-06-2013; in: "Transportation weight loss diet conference 2013", UKIP Media Events Ltd, Dorking, Surrey (2013), 100.

  386. Authors: Richard Zemann, E311 - FET; Fritz Bleicher, E311 - FET

    R. Zemann, F. Bleicher:
    "Helical Composite Springs";
    Talk: 29th Danubia-Adria-Symposium on Advances in Experimental Mechanics, Belgrad; 09-26-2012 - 09-29-2012; in: "Proceedings of the 29th Danubia-Adria-Symposium", Planeta-Print, 29 (2012), ISBN: 978-86-7083-762-1; 10 - 11.

  387. Authors: Richard Zemann, E311 - FET; Fritz Bleicher, E311 - FET; Falko Puschitz, E311 - FET; Reinhard Zisser-Pfeifer, E311 - FET

    R. Zemann, F. Bleicher, F. Puschitz, R. Zisser-Pfeifer:
    "Electrochemical Micromilling";
    Poster: 28th Danunbia-Adria-Symposium, Siofok; 09-28-2011 - 10-01-2011; in: "Danubia-Adria-Symposium", (2011), ISBN: 978-963-9058-32-3; 287 - 288.

    More information

  388. Authors: Richard Zemann, E311 - FET; Roland Fürbacher, E311 - FET; Fritz Bleicher, E311 - FET

    R. Zemann, R. Fürbacher, F. Bleicher:
    "A Measurement Technology to define the quality of machined FRP";
    Poster: 30th DAS Symposium on Advances in Experimental Mechanics, Primosten (invited); 09-25-2013 - 09-28-2013; in: "30th DAS Symposium on Advances in Experimental Mechanics", Croation Society of Mechanics, Zagreb (2013), ISBN: 978953753917-7; 298 - 299.

  389. Authors: Richard Zemann, E311 - FET; Lukas Kain; Fritz Bleicher, E311 - FET

    R. Zemann, L. Kain, F. Bleicher:
    "Vibration Assisted Machining of Carbon Fibre Reinforced Polymers";
    Talk: 24th DAAAM International Symposium, Zadar (invited); 10-23-2013 - 10-26-2013; in: "Annals of DAAAM for 2013 & Proceedings of 24th International DAAAM Symposium", Procedia Engineering, Elsevier Ltd., Volume 69, 2014 (2013), ISBN: 978-3-901509-971; 536 - 543.

  390. Authors: Reinhard Zisser-Pfeifer, E311 - FET; Réné Prahl

    R. Zisser-Pfeifer, R. Prahl:
    "Model for the Reduction of components of deviations for coordinate measuring machines";
    Talk: 29th Danubia-Adria-Symposium on Advances in Experimental Mechanics, Belgrad; 09-26-2012 - 09-29-2012; in: "29th Danubia-Adria-Symposium on Advances in Experimental Mechanics", Planeta-Print, 29 (2012), ISBN: 978-86-7083-762-1; 14 - 15.


Talks and Poster Presentations (without Proceedings-Entry)


  1. Authors: Beatrix Adjassoho, E308 - Gr Kozesch; Ernst Kozeschnik, E308 - Gr Kozesch; Christoph Lechner, E311 - FET; Christoph Habersohn, E311 - FET; Fritz Bleicher, E311 - FET; Stefan Gössinger, E302 - 2; Christian Bauer, E302 - 2; Franz Heindl, ACēT research GmbH; Manel Rodríguez Ripoll, ACēT research GmbH; Christian Tomastik

    B. Adjassoho, E. Kozeschnik, C. Lechner, Ch. Habersohn, F. Bleicher, S. Gössinger, C. Bauer, F. Heindl, M. Rodríguez Ripoll, C Tomastik:
    "Controlled surfaces treatment with MAchine Hammer Peening";
    Talk: METAL 2013, Brno; 05-15-2013 - 05-17-2013.

  2. Author: Ali Afjehi-Sadat, E311 - AuM

    A. Afjehi-Sadat:
    "Nanometrology and Nanotechnology for Mechanical Engineering and Biomedical Application";
    Talk: First Nano Partnering Day, WIFI, Wien; 05-29-2002.

  3. Author: Ferdinand Bammer, E311 - LLU

    F. Bammer:
    "A new Concept for a High Power Diode Laser";
    Talk: Argelas Generalversammlung, Wien (invited); 03-04-2003.

  4. Author: Ferdinand Bammer, E311 - LLU

    F. Bammer:
    "A new concept for a High Power Diode Laser";
    Talk: Laser Seminar/Mauterndorf, Mauterndorf/Austria (invited); 01-17-2003 - 01-21-2003.

  5. Author: Ferdinand Bammer, E311 - LLU

    F. Bammer:
    "A Virtual Diode Laser";
    Talk: Proceedings M4PL16, Igls/Austria (invited); 01-20-2003 - 01-24-2003.

  6. Author: Ferdinand Bammer, E311 - LLU

    F. Bammer:
    "Dioden- u. Festkörperlaser";
    Talk: Seminar für AUVA "Laser und Sicherheit", Wien (invited); 06-24-2004 - 06-25-2004.

  7. Authors: Ferdinand Bammer, E311 - LLU; Bernhard Holzinger, E311 - LLU

    F. Bammer, B. Holzinger:
    "A new compact high brilliance diode laser type";
    Talk: 9th International EULASNET Meeting, TU Wien, Inst. 345; 12-14-2005.

  8. Authors: Ferdinand Bammer, E311 - LLU; Bernhard Holzinger, E311 - LLU

    F. Bammer, B. Holzinger:
    "Ein neues Konzept für einen Hochleistungsdiodenlaser";
    Talk: Argelas Generalversammlung, Wien (invited); 03-11-2004.

  9. Authors: Ferdinand Bammer, E311 - LLU; Bernhard Holzinger, E311 - LLU

    F. Bammer, B. Holzinger:
    "Realization of Time-Multiplexing for High Power Diode Lasers";
    Talk: M4PL18, Igls/Tirol; 01-19-2005 - 01-21-2005.

  10. Authors: Ferdinand Bammer, E311 - LLU; Bernhard Holzinger, E311 - LLU

    F. Bammer, B. Holzinger:
    "Time-Multiplexing with Diode Lasers";
    Talk: Anwendertreffen Laserverbund Berlin-Brandenburg, Wien (invited); 10-22-2004.

    More information

  11. Authors: Ferdinand Bammer, E311 - LLU; Bernhard Holzinger, E311 - LLU; Thomas Schumi, E311 - LLU

    F. Bammer, B. Holzinger, T. Schumi:
    "Zeitmultiplexing von Hochleistungslaserdioden";
    Talk: Freitagskolloquium, Ferdinand Braun Institut für Höchstfrequenztechnik, Berlin (invited); 11-24-2006.

    More information

  12. Authors: Ferdinand Bammer, E311 - LLU; Alexander Kratky, E311 - LLU; Dieter Schuöcker, E311 - LLU

    F. Bammer, A. Kratky, D. Schuöcker et al.:
    "Umformen mit dem Laserstrahl";
    Talk: Laser Optics Berlin, Berlin; 03-17-2008 - 03-19-2008.

    More information

  13. Authors: Ferdinand Bammer, E311 - LLU; Dieter Schuöcker, E311 - LLU; Rok Petkovsek, University Ljubljana; Janez Mozina, Univ. Ljubjana

    F. Bammer, D. Schuöcker, R. Petkovsek, J. Mozina:
    "Dual mode single crystal photo-elastic modulator and possible applications";
    Poster: 10th School on Acousto-Optics and Applications, Danzig; 05-12-2008 - 05-15-2008.

    More information

  14. Authors: Carla Barbatti, MPI; José Garcia, MPI; Gerhard Liedl, E311 - LLU; Heraldo Pinto, MPI; Anke Rita Pyzalla, MPI Eisenforschung

    C. F. Barbatti, J. Garcia, G. Liedl, H. Pinto, A. Pyzalla:
    "Joining of Hardmetal to Steel by Laser Beam Welding";
    Talk: 16. DGM-Symposium Verbundwerkstoffe und Werkstoffverbunde, Bremen; 03-14-2007 - 03-16-2007.

    More information

  15. Authors: Jorge Martin Bauer, E311 - AuM; M. Numan Durakbasa, E311 - AuM; Gökcen Bas, E311 - AuM

    J.M. Bauer, M.N. Durakbasa, G. Bas:
    "Multi Functional Intelligent Measurement Robot, As a Part of a Global Quality Management System for Collaboration Between Small, Medium and Large Scale Enterprises";
    Talk: QIEM 2nd International Conference on Quality and Innovation in Engineering and Management, Cluj-Napoca; 11-22-2012 - 11-24-2012.

    More information

  16. Authors: Dominik Berger, E311 - FET; Fritz Bleicher, E311 - FET

    D. Berger, F. Bleicher:
    "Eco2 - Cut";
    Talk: Ökoprofit Klub - Workshop, Graz; 12-11-2008.

  17. Authors: Dominik Berger, E311 - FET; Georg Geiger, E311 - FET; Fritz Bleicher, E311 - FET

    D. Berger, G. Geiger, F. Bleicher:
    "Jahresabschlussbericht 2009 Forschungsgemeinschaft Straßenbahn SP2";
    Talk: Jahresabschlussmeeting Forschungsgemeinschaft Straßenbahn alle SP, Wien (invited); 12-11-2009.

  18. Authors: Johannes Bernreiter, E311 - FET; Fritz Bleicher, E311 - FET

    J. Bernreiter, F. Bleicher:
    "Aktuelle Entwicklungen im Projekt "UAG"";
    Talk: CORNET - User Comittee Meeting, Eibiswald; 09-30-2008.

  19. Authors: Johannes Bernreiter, E311 - FET; Fritz Bleicher, E311 - FET

    J. Bernreiter, F. Bleicher:
    "Hybridbearbeitung";
    Talk: AFA - Ausschuss für Arbeitstechnik - Zerspanung, TU Wien (invited); 12-04-2009.

    More information

  20. Authors: Johannes Bernreiter, E311 - FET; Fritz Bleicher, E311 - FET

    J. Bernreiter, F. Bleicher:
    "Neue Technologie für den Formenbau um Oberflächengüten zu verbessern und die Härte zu erhöhen.";
    Talk: Zerspanungstage Judenburg, Judenburg (invited); 11-10-2010 - 11-11-2010.

    More information

  21. Authors: Johannes Bernreiter, E311 - FET; Fritz Bleicher, E311 - FET

    J. Bernreiter, F. Bleicher:
    "Ultrasonic Assisted Grinding - UAG";
    Talk: Informationsveranstaltung des Kunststoffcluster NÖ, Wirtschaftskammer Eisenstadt; 09-12-2007.

    More information

  22. Authors: Johannes Bernreiter, E311 - FET; Fritz Bleicher, E311 - FET

    J. Bernreiter, F. Bleicher:
    "Zerspanungssimulation mit Abaqus";
    Keynote Lecture: AFA - Ausschuss für Arbeitstechnik - Zerspanung, TU-Wien; 11-14-2007.

  23. Authors: Johannes Bernreiter, E311 - FET; Fritz Bleicher, E311 - FET; Thomas Gröger

    J. Bernreiter, F. Bleicher, T. Gröger:
    "Ultrasonic Assisted Grinding - Projektzwischenbericht";
    Talk: CORNET - User Comittee Meeting, Wien; 02-25-2009.

  24. Author: Robert Bielak, E311 - LLU

    R. Bielak:
    "E-learning in laser technology with user interaction";
    Talk: Anwendertreffen Laserverbund Berlin-Brandenburg, Wien/Austria (invited); 10-22-2004.

  25. Authors: Robert Bielak, E311 - LLU; Christian Stiglbrunner, E311 - LLU

    R. Bielak, C. Stiglbrunner:
    "Virtuela - Virtual Eurolaser Laboratory";
    Talk: 8th International Conference Technology 2003, Bratisalava/Slowakei; 09-09-2003 - 09-10-2003.

  26. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "A machine tool application based on parallel kinematics in comparison with serial concepts";
    Talk: RAAD - 10th International Workshop on Robotics in Alpe-Adria-Danube Region, Wien; 05-16-2001 - 05-18-2001.

  27. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Advanced Machining Systems";
    Talk: Manufuture Austria, Wien (invited); 11-21-2007.

    More information

  28. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Allgemeine Trends in der Zerspanung";
    Talk: Roadshow 2011, Klaus, Gnadenwald, Fuschlsee, St. Ulrich bei Steyr, Graz, Vösendorf, St. Pölten (invited); 10-10-2011 - 10-19-2011.

  29. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "CFK im modernen Werkzeugmaschinenbau";
    Talk: AFA - Ausschuss für Arbeitstechnik - Zerspanung, Kapfenberg (invited); 03-28-2001.

    More information

  30. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Dezentrale Steuerungslösungen im Sondermaschinenbau";
    Talk: Branchentag Automation, Vösendorf (invited); 06-15-2000.

    More information

  31. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Die Werkzeugmaschine der Zukunft - wandlungsfähig und agil";
    Talk: Forum Maschinenbau 2012, Hagenberg im Mühlkreis (invited); 01-31-2012.

  32. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Einfluss der Topologie der Wendeschneidplatte";
    Talk: Fohnsdorfer Zerspanungstage, Fohnsdorf (invited); 11-22-2006.

    More information

  33. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Einfluss des Spanwinkels auf den Zerspanungsprozess";
    Talk: Fohnsdorfer Zerspanungstage, Fohnsdorf (invited); 11-23-2006.

    More information

  34. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Einfluss des Spanwinkels auf die Hochgeschwindigkeitsbearbeitung";
    Keynote Lecture: AFA - Ausschuss für Arbeitstechnik - Zerspanung, TU Wien; 11-29-2006.

    More information

  35. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Energieeffizienz in der Produktion";
    Talk: Technologie Workshop des Umweltclusters der Wirtschaftsagentur Wien, Wien (invited); 06-06-2013.

  36. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Entwicklung einer parallelkinematischen Bohr- und Fräseinheit für den flexiblen Einsatz in automatisierten Anlagen";
    Talk: AFA - Ausschuss für Arbeitstechnik - Zerspanung, Wien (invited); 12-12-2001.

    More information

  37. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Finishing of Weight-optimized Connecting Rods";
    Talk: 13th Powertrain Manufacturing Conference 2013, Darmstadt (invited); 09-26-2013 - 09-27-2013.

  38. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Funktionalisieren von Werkzeug-Oberflächen durch die Technologie des Schlagverdichtens";
    Talk: Forum Stanztechnik, Fellbach bei Stuttgart (invited); 11-08-2011 - 11-09-2011.

  39. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Future technologies and new machine tool research activities";
    Keynote Lecture: IMT 2010 - Tschechisch - Österreichisches Werkzeugmaschinenkolloquium, Brünn; 09-16-2010.

    More information

  40. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Hochdynamische Vorgänge im Zerspanungsprozess";
    Poster: AFA - Ausschuss für Arbeitstechnik - Zerspanung, TU Wien; 12-07-2005.

    More information

  41. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Hybridbearbeitung von sprödharten Werkstoffen";
    Talk: Tooling Days 2012, Kapfenberg (invited); 06-13-2012 - 06-14-2012.

  42. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Impulse aus Wirtschaft und Forschung";
    Talk: Intelligente Produktion, Wien (invited); 06-01-2011.

  43. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Innovation in der Produktionstechnik";
    Talk: Tagung des Vorstands der Industriellenvereinigung, Wien (invited); 11-29-2007.

    More information

  44. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Innovationen in der Fertigungstechnik";
    accepted as talk for: Round Table des Mechatronic Clusters, Linz; 11-09-2010.

  45. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Innovationen und Trends in der spanenden Fertigung";
    Talk: Berufungsvortrag, Technische Univserität Graz (invited); 10-15-2008.

    More information

  46. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Interaktion Maschine - Prozess - Einführung";
    Talk: MC-Workshop 2012, Linz (invited); 05-08-2012.

  47. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Klassifizierung rostfreier Werkstoffe in der Industrie für die spanende Bearbeitung";
    accepted as talk for: Zerspanungstage Judenburg, Judenburg; 11-10-2010 - 11-11-2010.

  48. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Kühlschmierstoffe: Produktivitäts- oder Kostenfaktor";
    Talk: TIM Praxisforum Zerspanung, Wels (invited); 10-01-2013.

  49. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Maschinenkonzepte";
    Talk: MC-Workshop 2012, Linz (invited); 05-08-2012.

  50. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Maschinenkonzepte der Zukunft";
    Talk: Laser Tech Day 2013, Pasching (invited); 01-31-2013.

  51. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Moderne Verfahren in der Produktionstechnik";
    Talk: Landesinnung Wien der Mechatroniker, Wien; 10-07-2008.

    More information

  52. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Next Technologies: Interaction of Mechatronics in Manufacturing Systems";
    Talk: 23rd International DAAAM Symposium, Zadar (invited); 10-24-2012 - 10-27-2012.

  53. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Parallelkinematische Werkzeugmaschinen";
    Talk: Buchpräsentation, Wien, Technische Universität; 05-27-2003.

    More information

  54. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Präzisionsbearbeitung im Maschinenbau";
    Talk: ASMET FU-Sitzung Thermisch Spritzen, Schwaz (invited); 05-25-2011.

  55. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Produktion heute: Auf dem Weg zur vierten industriellen Revolution";
    Talk: Fachtagung Schaeffler Austria "Wegweisende Innovationen und Produktionslösungen", Berndorf (invited); 06-17-2014.

  56. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Produktionstechnisches Innovations- und Applikationszentrum (PIA) in der Seestadt Aspern";
    Talk: Aspern Seestadt - Meet the Pioneers, Wien (invited); 04-26-2012.

  57. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Reinraumtechnik - Ein Überblick";
    Keynote Lecture: Reinraumtechniktag 2007, Wien; 10-04-2007.

    More information

  58. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Research on Cutting Technologies at the Institute of Production Engineering, Vienna University of Technology";
    Talk: ISCARīs International Technical Training Seminar, ISCAR Tefen Industrial Zone (invited); 06-30-2008 - 07-03-2008.

    More information

  59. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Schneidstoffe - Beschichtung - Werkzeuggeometrie: Möglichkeiten der Zerspanungsoptimierung";
    Talk: Schneidstoffe - Technologische Trends, St. Pölten (invited); 09-17-2009.

    More information

  60. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "smart - factory Laboratory for High Tech Manufacturing";
    Talk: Eröffnung des researchTUb Labors, Wien, Aspern (invited); 10-31-2012.

  61. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Technologieentwicklung ";
    Talk: AFA - Ausschuss für Arbeitstechnik - Zerspanung, Wien; 12-07-2004.

    More information

  62. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Transferzentrum - Entwicklung und Einsatzmöglichkeiten in der Automobilindustrie";
    Talk: 4. Internationale Walter AG Automobiltage, Tübingen (invited); 11-23-2010 - 11-24-2010.

  63. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Versuchsprogramm am LPT";
    Talk: AFA - Ausschuss für Arbeitstechnik - Zerspanung, Wien; 06-25-2007.

    More information

  64. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Wettbewerbsfaktor Automatisierung";
    Keynote Lecture: Ausseninstitut-Technologietransfer, TU Wien (invited); 05-30-2006.

    More information

  65. Author: Fritz Bleicher, E311 - FET

    F. Bleicher:
    "Zerspanung von keramischen Werkstoffen mit mehrachsiger Schwingungsunterstützung";
    Talk: Moderne Werkstoffe spanend bearbeiten, Dortmund (invited); 10-05-2011 - 10-06-2011.

  66. Authors: Fritz Bleicher, E311 - FET; Dominik Berger, E311 - FET

    F. Bleicher, D. Berger:
    "Methoden und Vorgehensweise bei F&E-Kooperationen am LPT";
    Talk: Innovation in der Produktionstechnik, TU Wien (invited); 09-27-2006.

    More information

  67. Authors: Fritz Bleicher, E311 - FET; Johannes Bernreiter, E311 - FET

    F. Bleicher, J. Bernreiter:
    "HPC Bearbeitung - Leistungssteigerung im ELB-Tieflochbohren";
    Talk: AFA - Ausschuss für Arbeitstechnik - Zerspanung, TU Wien; Prechtl-Saal; 11-12-2008.

  68. Authors: Fritz Bleicher, E311 - FET; Johannes Bernreiter, E311 - FET

    F. Bleicher, J. Bernreiter:
    "Optimization of Cutting Processes by Multiaxial-Vibration Assisted Machining";
    Talk: 61st CIRP General Assembly, Budapest (invited); 08-21-2011 - 08-27-2011.

  69. Authors: Fritz Bleicher, E311 - FET; Johannes Bernreiter, E311 - FET

    F. Bleicher, J. Bernreiter:
    "Tribological effects of structured and intensified surfaces";
    Talk: AFA - Ausschuss für Arbeitstechnik - Zerspanung, TU Wien (invited); 12-04-2009.

  70. Authors: Fritz Bleicher, E311 - FET; Johannes Bernreiter, E311 - FET; Christoph Einspieler, E311 - FET

    F. Bleicher, J. Bernreiter, C. Einspieler:
    "Comparison Of Different Measuring Methods For Positioning Of A Recording Device In Large Models";
    Poster: ASMET Austrian Society for Metallurgy and Materials, Leoben; 09-23-2009 - 09-25-2009.

    More information

  71. Authors: Fritz Bleicher, E311 - FET; Johannes Bernreiter, E311 - FET; Thomas Gröger

    F. Bleicher, J. Bernreiter, T. Gröger:
    "US-Actuator - Tests and Results";
    Talk: CORNET Steering Committee Meeting, Deggendorf (invited); 06-18-2009 - 06-19-2009.

  72. Authors: Fritz Bleicher, E311 - FET; Johannes Bernreiter, E311 - FET; Thomas Gröger

    F. Bleicher, J. Bernreiter, T. Gröger:
    "US-Actuator -Practical und theoretical Approach";
    Talk: CORNET Steering Committee Meeting, Leuven (invited); 02-11-2009.

  73. Authors: Fritz Bleicher, E311 - FET; Johannes Bernreiter, E311 - FET; Michael Heger, E311 - FET; Heiko Hulak, E311 - FET; Thomas Gröger

    F. Bleicher, J. Bernreiter, M. Heger, H. Hulak, T. Gröger:
    "Ultrasonic assisted machining";
    Talk: CORNET Steering Committee Meeting, Wien (invited); 11-09-2009 - 11-10-2009.

  74. Authors: Fritz Bleicher, E311 - FET; Johannes Bernreiter, E311 - FET; Bert Lauwers; Peter Ten Haaf

    F. Bleicher, J. Bernreiter, B. Lauwers, P. Ten Haaf:
    "Investigation of the Tool Life and the Process-Material Interaction in Ultrasonic Assisted Grinding of Si-SiC Ceramic Materials";
    Talk: CIRP-2011 -HybP-1 Collaborative Working Group on Hybrid Processes, Paris (invited); 01-26-2011.

  75. Authors: Fritz Bleicher, E311 - FET; Stefan Brandstetter, E311; Christoph Dorn, E311 - FET

    F. Bleicher, S. Brandstetter, C. Dorn:
    "Energie- und Condition Monitoring";
    Talk: Condition Monitoring Forum 2012, Köln (invited); 01-24-2012 - 01-25-2012.

  76. Authors: Fritz Bleicher, E311 - FET; Stefan Brandstetter, E311; Christoph Dorn, E311 - FET

    F. Bleicher, S. Brandstetter, C. Dorn:
    "Energiemonitoring für Zustandsbeurteilung aus Effizienzsicht";
    Talk: Condition Monitoring Forum 2012, Köln (invited); 01-24-2012 - 01-25-2012.

  77. Authors: Fritz Bleicher, E311 - FET; Fabian Dür, E311 - FET; Alexandros-Athanassi Dimitriou, E311

    F. Bleicher, F. Dür, A. Dimitriou:
    "Analyse Fa. Hörbiger Ventilwerke";
    Talk: Vortrag bei der Fa. Hörbiger Ventilwerke, Wien; 05-02-2012.

  78. Authors: Fritz Bleicher, E311 - FET; Fabian Dür, E311 - FET; Thomas Flatz, E311 - FET

    F. Bleicher, F. Dür, T. Flatz:
    "5th User Group Meeting - Progress Report";
    Talk: 5th User Group Meeting, Wien; 05-15-2012.

  79. Authors: Fritz Bleicher, E311 - FET; Fabian Dür, E311 - FET; Thomas Flatz, E311 - FET

    F. Bleicher, F. Dür, T. Flatz:
    "6th Steering Commitee Meeting - Progress Report";
    Talk: 6th Steering Commitee Meeting, Belgien; 02-13-2012 - 02-14-2012.

  80. Authors: Fritz Bleicher, E311 - FET; Fabian Dür, E311 - FET; Thomas Flatz, E311 - FET

    F. Bleicher, F. Dür, T. Flatz:
    "7th Steering Commitee Meeting - Progress Report User Group Austria";
    Talk: 7th Steering Commitee Meeting, Aachen; 05-23-2012.

  81. Authors: Fritz Bleicher, E311 - FET; Fabian Dür, E311 - FET; Thomas Flatz, E311 - FET

    F. Bleicher, F. Dür, T. Flatz:
    "Analyse der Blockdurchwärmung bei der Firma Worthington";
    Talk: Vortrag bei der Firma Worthington, Kienberg bei Gaming; 09-06-2012.

  82. Authors: Fritz Bleicher, E311 - FET; Fabian Dür, E311 - FET; Thomas Flatz, E311 - FET

    F. Bleicher, F. Dür, T. Flatz:
    "Analyse des Heizenergiebedarfs der Shedhalle bei der Firma Flowserve";
    Talk: Vortrag bei der Firma Flowserve, Brunn/Gebirge; 04-13-2012.

  83. Authors: Fritz Bleicher, E311 - FET; Fabian Dür; Thomas Flatz

    F. Bleicher, F. Dür, T. Flatz:
    "ECOēCUT - Ein ganzheitlicher Ansatz zur Energieoptimierung in Fertigungsbetrieben";
    Talk: ECOēCUT - Ein ganzheitlicher Ansatz zur Energieoptimierung in Fertigungsbetrieben, Wien; 11-13-2012.

  84. Authors: Fritz Bleicher, E311 - FET; Fabian Dür, E311 - FET; Thomas Flatz, E311 - FET

    F. Bleicher, F. Dür, T. Flatz:
    "Energie-/Klimaziele - Herausforderung für Wirtschaft und Wissenschaft";
    Talk: MC - Jahrestagung 2012, St. Pölten (invited); 06-25-2012.

  85. Authors: Fritz Bleicher, E311 - FET; Fabian Dür; Thomas Flatz

    F. Bleicher, F. Dür, T. Flatz:
    "Energieeffiziente Werkzeugmaschine";
    Talk: MC-Workshop 2012, Linz; 05-08-2012.

  86. Authors: Fritz Bleicher, E311 - FET; Fabian Dür, E311 - FET; Thomas Flatz, E311 - FET

    F. Bleicher, F. Dür, T. Flatz:
    "Energietische Vermessung der Herbold Rohrmühle - Typ SMR 120/80 H12-3";
    Talk: Vortrag in der Herbold Rohrmühle, Traiskirchen; 10-30-2012.

  87. Authors: Fritz Bleicher, E311 - FET; Fabian Dür, E311 - FET; Thomas Flatz, E311 - FET

    F. Bleicher, F. Dür, T. Flatz:
    "Messungen bei ACTech GmbH";
    Talk: Vortrag für die Firma ACTech GmbH, Wien; 10-17-2012.

  88. Authors: Fritz Bleicher, E311 - FET; Fabian Dür, E311 - FET; Thomas Flatz, E311 - FET; Christian Salvatori, E311

    F. Bleicher, F. Dür, T. Flatz, C. Salvatori:
    "Vergleich verschiedener Linearantriebstechnologien";
    Talk: Vortrag - Labor für Produktionstechnik, Wien; 11-05-2012.

  89. Authors: Fritz Bleicher, E311 - FET; Fabian Dür, E311 - FET; Matthias Stark, E311

    F. Bleicher, F. Dür, M. Stark:
    "Energy Footprint Großblasanlage BA34.2/69";
    Talk: Vortrag bei der Firma BEKUM Maschinenfabrik Traismauer GesmbH, Traismauer; 11-16-2012.

  90. Authors: Fritz Bleicher, E311 - FET; Christoph Einspieler, E311 - FET

    F. Bleicher, C. Einspieler:
    "Messtechnische Analyse von Zerspanungsprozessen";
    Talk: AFA - Ausschuss für Arbeitstechnik - Zerspanung, Wien; 01-21-2004.

    More information

  91. Authors: Fritz Bleicher, E311 - FET; Christoph Einspieler, E311 - FET; Johannes Bernreiter, E311 - FET; Boris Huber; Norbert Krouzecky

    F. Bleicher, C. Einspieler, J. Bernreiter, B. Huber, N. Krouzecky:
    "Development of a measuring system for analysis of hydraulic models in dimensions of 50 x 16m using the technology of numerical control";
    Poster: 25th Danubia-Adria Symposium on Advances in Experimental Mechanics, Budweis, Czech Republic (invited); 09-24-2008 - 09-27-2008.

    More information

  92. Authors: Fritz Bleicher, E311 - FET; Christoph Einspieler, E311; Johannes Bernreiter, E311 - FET; Boris Huber, E222 - 1; Norbert Krouzecky, E222 - 1

    F. Bleicher, C. Einspieler, J. Bernreiter, B. Huber, N. Krouzecky:
    "Development of a measuring system for the analysis of hydraulic models of the size of 50x16 m by the use of numerical control technology";
    Poster: 25th Danubia-Adria Symposium on Advances in Experimental Mechanics, Budweis and Krumlov (invited); 09-24-2008 - 09-27-2008.

  93. Authors: Fritz Bleicher, E311 - FET; Thomas Flatz, E311 - FET; Fabian Dür, E311 - FET; Matthias Stark, E311

    F. Bleicher, T. Flatz, F. Dür, M. Stark:
    "Analyse der Messung bei Schrenk GmbH";
    Talk: Vortrag bei der Firma Schrenk GmbH, Vitis; 02-28-2012.

  94. Authors: Fritz Bleicher, E311 - FET; Peter Furtner, E311 - FET

    F. Bleicher, P. Furtner:
    "Reinraumtechnik - Aktuelle Trends";
    Talk: Round Table Reinraumtechnik, Villach (invited); 09-28-2006.

    More information

  95. Authors: Fritz Bleicher, E311 - FET; Christoph Habersohn, E311 - FET

    F. Bleicher, Ch. Habersohn:
    "Modellierung und Simulation einer Maschine";
    Talk: MC-Workshop 2012, Linz (invited); 05-08-2012.

  96. Authors: Fritz Bleicher, E311 - FET; Boris Huber, E222 - 1; Karl Fuchs, E222 - 1; Christoph Einspieler, E311 - FET; Johannes Bernreiter, E311 - FET; Norbert Krouzecky, E222 - 1

    F. Bleicher, B. Huber, K. Fuchs, C. Einspieler, J. Bernreiter, N. Krouzecky et al.:
    "Comparison of different measuring methods for positioning of a recording device in large models";
    Talk: 26th Danubia-Adria Symposium on Advances in Experimental Mechanics, Leoben, Österreich (invited); 09-23-2009 - 09-26-2009.

  97. Authors: Fritz Bleicher, E311 - FET; Igor Kovac, E311

    F. Bleicher, I. Kovac:
    "Adaptive manufacturing with machinery system integration";
    Talk: IMT 2010 - Tschechisch - Österreichisches Werkzeugmaschinenkolloquium, Brünn (invited); 09-16-2010.

    More information

  98. Authors: Fritz Bleicher, E311 - FET; Christoph Lechner, E311 - FET

    F. Bleicher, C. Lechner:
    "The use of MHP for modification and functionalization of surfaces";
    Talk: 53. DGM - Fachausschuss Mechanische Oberflächenbehandlung, Rastatt (invited); 04-18-2013.

  99. Authors: Fritz Bleicher, E311 - FET; Christoph Lechner, E311 - FET; Martin Obermair, E311 - FET; Christoph Habersohn, E311 - FET

    F. Bleicher, C. Lechner, M. Obermair, Ch. Habersohn:
    "Improving the over-all efficiency of mold and dies by functionalizing surfaces";
    Keynote Lecture: MIT & SLIM 2013 - 12th International Conference on Management of Innovative Technologies, Fiesa, Slowenien (invited); 09-22-2013 - 09-24-2013.

  100. Authors: Fritz Bleicher, E311 - FET; Thomas Mikats, E311 - FET; Michael Heger, E311 - FET; Martin Fuchs, E311; Ivan Ibrishimov, E311; Josef Gaschl

    F. Bleicher, T. Mikats, M. Heger, M. Fuchs, I. Ibrishimov, J. Gaschl:
    "Fertigungssystem Mantis - Voith";
    Talk: Vortrag für die Fa. Voith, Heidenheim; 11-22-2012.

  101. Authors: Fritz Bleicher, E311 - FET; Karl Ponweiser, E302 - 1; Teresa Magyar, E311; Kristina Orehounig, E259 - 3; Ines Leobner, E302 - 1; Fabian Dür, E311 - FET; Thomas Flatz, E311 - FET; Christian Reinisch, E183 - 1; Bernhard Heinzl, E101 - 6; Matthias Rößler, E101 - 6; Wolfgang Kastner, E183 - 1

    F. Bleicher, K. Ponweiser, T. Magyar, K. Orehounig, I. Leobner, F. Dür, T. Flatz, C. Reinisch, B. Heinzl, M. Rößler, W. Kastner:
    "Interdisziplinäre Forschung zur Energieoptimierung in Fertigungsbetrieben - Ergebnisse 2011/12";
    Talk: Konsortialmeeting 2012, Wien; 06-27-2012.

    More information