TU Home
This publication list has been generated automatically from the publication data of the Faculty of Mechanical and Industrial Engineering. Please invoke the page "Publications of the Faculty" directly for more complex searches and queries, or use the global search function of the Publication Database of the Vienna University of Technology!


Publication Database Home  

Publication list for
Franz G. Rammerstorfer
E317 - Institute for Lightweight Design and Structural Biomechanics
as author

313 records (1974 - 2014)

The complete list of publications of the Faculty of Mechanical and Industrial Engineering is available from the publication database beginning with the publication year 2002. The database may but need not necessarily contain publications dated earlier than 2002.


Books and Book Editorships


F. G. Rammerstorfer (ed.):
"Nonlinear Analysis of Shells by Finite Elements";
Springer-Verlag, Wien, 1992, ISBN: 3-211-82416-2; 283 pages.

F. G. Rammerstorfer:
"Repetitorium Leichtbau";
R. Oldenbourg Verlag, Wien, 1992, ISBN: 3-7029-0345-3; 168 pages.

J. Hult, F. G. Rammerstorfer (ed.):
"Engineering Mechanics of Fibre Reinforced Polymers and Composite Structures";
Springer-Verlag, Wien, 1994, ISBN: 3-211-82652-1; 314 pages.

J. Hult, F. G. Rammerstorfer et al.:
"Engineering Mechanics of Fibre Reinforced Polymers and Composite Structures";
in series "CISM COURSES AND LECTURES No. 348", series editor: W. Schneider et al.; issued by: CISM; Springer-Verlag, Wien New York, 1994, ISBN: 3-211-82652-1, 314 pages.

H.A. Mang, F. G. Rammerstorfer (ed.):
"Proceedings of the IUTAM/IACM Symposium on Discretization Methods in Structural Mechanics II";
Kluwer Academic Publishers, Dordrecht, 1999, 371 pages.

H.A. Mang, F. G. Rammerstorfer, J. Eberhardsteiner (ed.):
"Book of Abstracts of the Fifth World Congress on Computational Mechanics (WCCM V)";
TU Wien, Wien, Austria, 2002, ISBN: 3-9501554-1-4; 1490 pages.

H.A. Mang, F. G. Rammerstorfer, J. Eberhardsteiner (ed.):
"Proceedings of the Fifth World Congress on Computational Mechanics (WCCM V)";
TU Wien, Wien, Austria, 2002, ISBN: 3-9501554-0-6.

J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (ed.):
"CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)";
Vienna University of Technology, Wien, 2012, ISBN: 978-3-9502481-9-7.


Publications in Scientific Journals


F. G. Rammerstorfer:
"Comment on: Buckling of rotating rods and plates";
International Journal of Mechanical Sciences, 16 (1974), 515 - 517.

F. G. Rammerstorfer:
"On the optimal distribution of the Young's modulus of a vibrating prestressed beam";
Journal of Sound and Vibration, 37 (1974), 1; 140 - 145.

F. G. Rammerstorfer, F. Hastik:
"Der dynamische E-Modul von Schleifkörpern";
Werkstatt und Betrieb, 107 (1974), 9; 527 - 533.

F. G. Rammerstorfer, R. Beer:
"Die Erhöhung der Grundfrequenz und der Beullast von dünnen Kreisplatten durch geeignete plastische Verformung";
Forschung im Ingenieurwesen, 42 (1976), 5; 168 - 172.

F. G. Rammerstorfer:
"Increase of the first natural frequency and buckling load of plates by optimal fields of initial stresses";
Acta Mechanica, 27 (1977), 217 - 238.

F. G. Rammerstorfer:
"Optimale Eigenspannungszustände in schwingenden, vorgespannten Kreisplatten";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 57 (1977), 84 - 87.

R. Grossmayer, F. G. Rammerstorfer, F. Ziegler:
"Untersuchung des Verhaltens von Bauwerken bei Erdbebenerregung - Modellversuche";
Österreichische Ingenieur-Zeitschrift (ÖIZ), 22 (1979), 1; 15 - 22.

F. G. Rammerstorfer, H. Steiner, A. Grossmayer, F. Ziegler:
"Plötzliche Veränderung von Randbedingungen eines BiegebalČkens";
Acta Mechanica, 33 (1979), 147 - 162.

F. G. Rammerstorfer, F.D. Fischer, Ch. Jaquemar, H. Kreulitsch, A. Scheinecker, J. Stulik, A. Niedermayr:
"Die thermischen und thermo-visko-elasto-plastischen Vorgänge beim Stranggießen von Stahl";
Archiv f.d. Eisenhüttenwesen, 51 (1980), 2; 67 - 72.

F. G. Rammerstorfer, F.D. Fischer, Ch. Jaquemar, H. Kreulitsch, A. Scheinecker, J. Stulik, A. Niedermayr:
"Verfahren zur Berechnung der thermischen und thermo-visko-elasto-plastischen Vorgänge beim Stranggießen von Stahl";
Archiv f.d. Eisenhüttenwesen, 51 (1980), 2; 61 - 66.

B. Brendel, F.D. Fischer, E. Ramm, F. G. Rammerstorfer:
"Linear and Nonlinear Stability Analysis of Thin Cylindrical Shells Under Wind Loads";
Journal of Structural Mechanics, 9 (1981), 1; 91 - 113.

F. G. Rammerstorfer, F. Fischer, W. Mitter, K.J. Bathe, M.D. Snyder:
"On Thermo-Elastic-Plastic Analysis of Heat-Treatment Processes Including Creep and Phase Change";
Computers and Structures, 13 (1981), 771 - 779.

F.D. Fischer, F. G. Rammerstorfer:
"Berechnung von thermomechanischen Vorgängen bei der Wärmebehandlung von Stahlkörpern";
Schweizer Ingenieur und Architekt, 18 (1983), 479 - 484.

F. G. Rammerstorfer:
"On the Modeling of Cracks by Finite Elements";
Scandinavian Journal of Metallury, 12 (1983), 293 - 298.

E.T. Till, F. G. Rammerstorfer:
"Nonlinear Finite Element Analysis of an Autofrettage Process";
Computers and Structures, 7 (1983), 5-6; 857 - 864.

F. G. Rammerstorfer, E.T. Till, H. Bramerdorfer, H. Schubert, K. Schwaha:
"Model Investigations on Horizontal Continuous Casting";
Fachberichte Hüttenpraxis Metallverarbeitung, 22 (1984), 834 - 839.

W. Mitter, F. G. Rammerstorfer, O. Gründler, G. Wiedner:
"Discrepancies Between Calculated and Measured Residual Stresses in a Quenched Pure Iron Cylinder";
Materials Science and Technology, 1 (1985), 793 - 798.

F. G. Rammerstorfer, W. Auli, F.D. Fischer:
"Uplifting and Stability of Wind-Loaded Vertical Cylindrical Shells";
Engineering Computations, 2 (1985), 3; 170 - 180.

F. G. Rammerstorfer, F. Wiesinger, E. Tomandl:
"Weinflaschen führen auf Stabilitätsprobleme";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 65 (1985), 4; 93 - 96.

F.D. Fischer, F. G. Rammerstorfer, W. Auli:
"Erdbebenbeanspruchte Tankbauwerke - gelöste und ungelöste Probleme";
ÖIAZ, 131 (1986), 140 - 141.

F. Nahler, F.D. Fischer, F. G. Rammerstorfer:
"Erdbebensichere Bemessung zylindrischer Behälter";
ÖIAZ, 131 (1986), 367 - 371.

F. G. Rammerstorfer, W. Auli, F.D. Fischer:
"Abheben und Beulen von zylindrischen Behältern bei Windbelastung";
ÖIAZ, 131 (1986), 137 - 139.

F. G. Rammerstorfer, F.D. Fischer, R. Flesch:
"Simulation von Erdbebenbeanspruchungen flüssigkeitsgefüllter Lagertanks - Modellversuche";
ÖIAZ, 131 (1986), 414 - 418.

F. Bauer, H. J. Böhm, F.D. Fischer, F. G. Rammerstorfer:
"Finite Element Analysis of Drastic Shape Changes of Cylinders Due to Thermal Cycling";
Computers and Structures, 26 (1987), 263 - 274.

F. G. Rammerstorfer, K. Scharf, H. J. Böhm:
"Eine kritische Betrachtung der Schubfeldtheorie";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 67 (1987), 133 - 136.

F.D. Fischer, F. G. Rammerstorfer:
"Comments to the paper 'Seismic Analysis of Liquid Storage Tanks' by G.S.Leon and E.A.M.Kausel";
Journal of Structural Engineering, 113 (1988), 2324 - 2326.

F. G. Rammerstorfer, W. Billinger, F.D. Fischer:
"Beulversuche an dünnwandigen, flüssigkeitsgefüllten Schalen";
ÖIAZ, 8 (1988), 430 - 431.

F. G. Rammerstorfer, W. Billinger, F.D. Fischer:
"Stabilität flüssigkeitsgefüllter unverankerter Zylinderschalen auf schräger Unterlage";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 68 (1988), 240 - 243.

F. G. Rammerstorfer, K. Scharf, F.D. Fischer, R. Seeber:
"Collapse of Earthquake Excited Tanks";
Res Mechanica, 25 (1988), 129 - 143.

A. Starlinger, F. G. Rammerstorfer, W. Auli:
"Beulen und Nachbeulverhalten von dünnen verrippten und unverrippten Kugelschalen unter Außendruck";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 68 (1988), 4; 257 - 260.

F.D. Fischer, F. G. Rammerstorfer, W. Schreiner:
"The Extensible Uplifting Strip";
Acta Mechanica, 80 (1989), 3-4; 227 - 257.

F. G. Rammerstorfer, W. Auli, K. Scharf:
"FE-Formulierungen für Parameterresonanzen bei geometrisch nichtlinearem Bauteilverhalten";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 69 (1989), 5; 422 - 425.

F. G. Rammerstorfer, K. Dorninger, H. J. Böhm, F. Zerobin:
"Analysis of Frictional Contact Problems in High Field Superconducting Magnets for Hadron Collider";
Computers and Structures, 32 (1989), 3/4; 787 - 795.

F. G. Rammerstorfer, K. Dorninger, J. Ployer:
"Nonlinear Stability Problems in Connection with Buried Pipelines for Hot Water Supply";
PVP Pressure Vessels and Piping, 169 (1989), 57 - 62.

F. G. Rammerstorfer, K. Scharf, F.D. Fischer:
"On Problems in the Use of Earthquake Response Spectrum Methods for Fluid-Structure-Soil Interaction";
PVP Pressure Vessels and Piping, 157 (1989), 61 - 68.

A. Starlinger, F. G. Rammerstorfer, W. Scheidl:
"Stabilität von Generatorkuppeln";
ELIN-Zeitschrift, 41 (1989), 14 - 21.

H. J. Böhm, F. G. Rammerstorfer, R. Schmid, A. Starlinger, R. Slavicek:
"Numerical Modelling and Nonlinear Analysis of the Behaviour of Maxillary Partial Denture";
Engineering Computations, 7 (1990), 4; 338 - 343.

K. Dorninger, F. G. Rammerstorfer:
"A Layered Composite Shell Element for Elastic and Thermoelastic Stress and Stability Analysis at Large Deformations";
International Journal for Numerical Methods in Engineering, 30 (1990), 4; 833 - 858.

F.D. Fischer, E. Hinteregger, F. G. Rammerstorfer:
"Numerische Simulation einer experimentellen Spannungsermittlung nach dem Bohrlochverfahren und Vergleich mit den rechnerisch ursprünglich vorhandenen Spannungen";
Materialprüfung, 32 (1990), 6; 181 - 185.

F.D. Fischer, F. G. Rammerstorfer, F.J. Bauer:
"Fatigue and Fracture of High-Alloyed Steel Specimens Subjected to Purely Thermal Cycling";
Metallurgical Transaction A, 21A (1990), 935 - 948.

E. Hinteregger, F.D. Fischer, F. G. Rammerstorfer:
"Berechnung der Längseigenspannungen langer Schienen während des Abkühlens";
Berg- und Hüttenmännische Monatshefte (BHM), 135 (1990), 437 - 442.

F. G. Rammerstorfer, K. Scharf, F.D. Fischer:
"Storage Tanks under Earthquake Loading";
Applied Mechanics Reviews, 43 (1990), 11; 216 - 282.

R. Seeber, F.D. Fischer, F. G. Rammerstorfer:
"Analysis of a Three-Dimensional Tank-Liquid-Soil Interaction Problem";
Journal of Pressure Vessel Technology, 112 (1990), 28 - 33.

H. J. Böhm, F. G. Rammerstorfer:
"Micromechanical Investigation of the Processing and Loading of Fiber Reinforced Metal Matrix Composites";
Materials Science and Engineering A, A135 (1991), 185 - 188.

K.L. Maurer, F. G. Rammerstorfer, F.D. Fischer:
"Das Erzherzog Karl Denkmal am Heldenplatz in Wien - Untersuchungen zum Gefügeaufbau und zur Standfestigkeit";
Praktische Metallographie - Practical Metallography, 22 (1991), 33 - 52.

T.J. Reiter, F. G. Rammerstorfer, H. J. Böhm:
"Zur numerischen Prognose spannungsbedingter Knochenumbildungen";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 71 (1991), 693 - 697.

K. Scharf, F. G. Rammerstorfer:
"Probleme bei der Anwendung der Antwortspektrenmethode für Flüssigkeit-Festkörper-Interaktionsprobleme des Erdbebeningenieurwesens";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 71 (1991), 160 - 164.

A. Starlinger, F. G. Rammerstorfer:
"Berücksichtigung von lokalem kurzwelligem Deckschichtbeulen in speziellen Finiten Sandwich-Schalenelementen";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 71 (1991), 619 - 623.

A.J. Svobodnik, H. J. Böhm, F. G. Rammerstorfer:
"A 3/D Finite Element Approach for Metal Matrix Composites Based on Micromechanical Models";
International Journal of Plasticity, 7 (1991), 8; 781 - 802.

G. Feigl, F.D. Fischer, K.L. Maurer, F. G. Rammerstorfer:
"Bruchmechanik-Empfehlungen der Arbeitsgruppe `Bruchmechanik des Österr.Stahlbauverbandes (ÖSTV)";
ÖIAZ, 137 (1992), 6; 257 - 258.

G. Feigl, F.D. Fischer, K.L. Maurer, F. G. Rammerstorfer:
"Bruchmechanik-Empfehlungen der Arbeitsgruppe `Bruchmechanik des Österr.Stahlbauverbandes (ÖSTV)";
ÖIAZ, 137 (1992), 6; 257 - 258.

F. G. Rammerstorfer, F.D. Fischer:
"A Method for the Experimental Determination of Residual Stresses in Axisymmetric Composite Cylinders";
Journal of Engineering Materials and Technology, 114 (1992), 90 - 96.

F. G. Rammerstorfer, F.D. Fischer, H. J. Böhm, W. Daves:
"Computational Micromechanics of Multiphase Materials";
Computers and Structures, 44 (1992), 1-2; 453 - 458.

F. G. Rammerstorfer, K. Scharf, K.L. Maurer, F.D. Fischer:
"Stress Analysis of the Archduke Carl Monument in Vienna";
International Journal of Computer Applications in Technology, 5 (1992), 100 - 108.

C.A. Abel, E. Weissenbek, F. G. Rammerstorfer:
"Influence of Damage on the Mechanical Behaviour of Short Fiber Reinforced MMCs with Strong and Weak Interfaces";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 73 (1993), 423 - 426.

H. J. Böhm, F. G. Rammerstorfer, E. Weissenbek:
"Some Simple Models for Micromechanical Investigations of Fiber Arrangement Effects in MMCs";
Computational Materials Science, 1 (1993), 3; 177 - 194.

I.C. Skrna-Jakl, F. G. Rammerstorfer:
"Numerical Investigations of Free Edge Effects in Integrally Stiffened Layered Composite Panels";
Computers and Structures, 25 (1993), 129 - 137.

E. Weissenbek, F. G. Rammerstorfer:
"Influence of the Fiber Arrangement on the Mechanical and Thermo-Mechanical Behavior of Short-Fiber Reinforced MMCs";
Acta Metallurgica et Materialia, 41 (1993), 10; 2833 - 2843.

H. J. Böhm, F.D. Fischer, F. G. Rammerstorfer, T. Siegmund:
"Microscale Arrangement Effects on the Thermomechanical Behavior of Advanced Two-Phase Composites";
Journal of Engineering Materials and Technology, 116 (1994), 3; 268 - 273.

F.D. Fischer, F. G. Rammerstorfer:
"Mode-I Crack Projection Procedure Using the Strain Energy Density Criterion";
Theoretical and Applied Fracture Mechanics, 20 (1994), 67 - 74.

F. G. Rammerstorfer, A. Starlinger, K. Dorninger:
"Combined Micro- and Macromechanical Considerations of Layered Composite Shells";
International Journal for Numerical Methods in Engineering, 37 (1994), 15; 2609 - 2629.

T.J. Reiter, H. J. Böhm, W. Krach, M. Pleschberger, F. G. Rammerstorfer:
"Some Applications of the Finite Element Method in Biomechanical Stress Analysis";
International Journal of Computer Applications in Technology, 7 (1994), 3-6; 233 - 241.

X. Wang, F. G. Rammerstorfer:
"Coupling Effects in Linear Stress and Buckling Analysis by the Finite Strip Method";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 74 (1994), 6; 712 - 714.

E. Weissenbek, H. J. Böhm, F. G. Rammerstorfer:
"Micromechanical Investigations of Arrangement Effects in Particle Reinforced Metal Matrix Composites";
Computational Materials Science, 3 (1994), 2; 263 - 278.

F.D. Fischer, O. Kolednik, G.X. Shan, F. G. Rammerstorfer:
"A Note on Calibration of Ductile Failure Damage Indicators";
International Journal of Fracture, 73 (1995), 4; 354 - 375.

W. Krach, T.J. Reiter, F. G. Rammerstorfer:
"Computerunterstützte Vorhersage des Knochenumbaus am Beispiel von Knieendoprothesen";
Biomedizinische Technik, 40 (1995), E2; 78 - 80.

H. E. Pettermann, T.J. Reiter, F. G. Rammerstorfer:
"Ein Simulationsalgorithmus der natürlichen Anpassung des orthotropen Knochenmaterials";
Biomedizinische Technik, 40 (1995), E2; 127 - 129.

M. Pleschberger, F. G. Rammerstorfer:
"Spannungs- und Deformationsanalyse des zahnlosen menschlichen Unterkiefers mit Hilfe der Methode der finiten Elemente";
Biomedizinische Technik, 40 (1995), E2; 124 - 126.

N.L. Praxmarer, F. G. Rammerstorfer, K. Irsigler, T. Kästenbauer:
"Eine Meßmethode zur Erfassung von Fußsteifigkeiten und ihre Anwendungen";
Biomedizinische Technik, 40 (1995), E2; 90 - 92.

M.A. Stiftinger, I.C. Skrna-Jakl, F. G. Rammerstorfer:
"Buckling and Postbuckling Investigations of Imperfect Curved Composite Shells, Part B: Computational Investigations";
Thin-Walled Structures, 23 (1995), 339 - 350.

V.A. Buryachenko, F. G. Rammerstorfer:
"Thinly Coated Inclusion with Stress Free Strains in an Elastic Medium";
Mechanics Research Communications, 23 (1996), 505 - 509.

L.V. Nikitin, F.D. Fischer, E.R. Oberaigner, F. G. Rammerstorfer, M. Seitzberger, R.I. Mogilevsky:
"On the Frictional Behaviour of Thermally Loaded Beams Resting on a Plane";
International Journal of Mechanical Sciences, 38 (1996), 11; 1219 - 1229.

A.F. Plankensteiner, H. J. Böhm, F. G. Rammerstorfer, V.A. Buryachenko:
"Hierarchical Modeling of the Mechanical Behavior of High Speed Steels as Layer-Structured Particulate MMCs";
Journal de Physique IV, 6 (1996), C6; 395 - 402.

I.C. Skrna-Jakl, M.A. Stiftinger, F. G. Rammerstorfer:
"Numerical Investigations of an Imperfect Stringer-Stiffened Composite Wing Torsion Box - An Analysis Concept";
Composites Part B, 27 (1996), 1; 59 - 69.

X. Wang, F. G. Rammerstorfer:
"Determination of Effective Breadth and Effective Width of Stiffened Plates by Finite Strip Analyses";
Thin-Walled Structures, 26 (1996), 4; 261 - 286.

V. A. Buryachenko, F. G. Rammerstorfer:
"Elastic Stress Fluctuations in Random Structure Particulate Composites";
European Journal of Mechanics - A/Solids, 16 (1997), 79 - 102.

V.A. Buryachenko, F. G. Rammerstorfer, A.F. Plankensteiner:
"A Local Theory of Elastoplastic Deformations of Random Structure Composites";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 77 (1997), Supplement 1; 61 - 62.

C.M. Chimani, H. J. Böhm, F. G. Rammerstorfer:
"On Stress Singularities at Free Edges of Bimaterial Junctions - A Micromechanical Study";
Scripta Materialia, 36 (1997), 8; 943 - 947.

M.Y. Nyashin, V.S. Pechenov, F. G. Rammerstorfer:
"Determination of Optimal Orthodontic Forces";
Russian Journal of Biomechanics, 1-2 (1997), 84 - 96.

H. E. Pettermann, H. J. Böhm, F. G. Rammerstorfer:
"Some Direction Dependent Properties of Matrix-Inclusion Type Composites with Given Reinforcement Orientation Distributions";
Composites Part B, 28B (1997), 3; 253 - 265.

H. E. Pettermann, T.J. Reiter, F. G. Rammerstorfer:
"Computational Simulation of Internal Bone Remodeling";
Archives of Computational Methods in Engineering, 4 (1997), 295 - 323.

A.F. Plankensteiner, H. J. Böhm, F. G. Rammerstorfer, V.A. Buryachenko, G. Hackl:
"Modeling of Layer-Structured High Speed Steel";
Acta Materialia, 45 (1997), 5; 1875 - 1887.

M. Seitzberger, F. G. Rammerstorfer, H.P. Degischer, R. Gradinger:
"Crushing of Axially Compressed Steel Tubes Filled with Aluminium Foam";
Acta Mechanica, 125 (1997), 1-4; 93 - 105.

M. Seitzberger, F. G. Rammerstorfer, C. Reichhold:
"Lokale Effekte in Linientragwerken mit geringer Biegesteifigkeit";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 77 (1997), Supplement 1; 311 - 312.

M.A. Stiftinger, F. G. Rammerstorfer:
"On Face Layer Wrinkling in Sandwich Shells - Theoretical and Experimental Investigations";
Thin-Walled Structures, 29 (1997), 113 - 127.

V.A. Buryachenko, F. G. Rammerstorfer:
"Thermoelastic Stress Fluctuations in Random-Structure Coated Particulate Composites";
European Journal of Mechanics - A/Solids, 17 (1998), 763 - 788.

C.M. Chimani, H. J. Böhm, F. G. Rammerstorfer:
"On Interface Edge Singularities in Layered Composites";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 78 (1998), Supplement 1; 49 - 52.

A. F. Plankensteiner, H. J. Böhm, F. G. Rammerstorfer, H. E. Pettermann:
"Multiscale Modeling of Highly Heterogeneous Particulate MMCs";
Journal de Physique, 8 (1998), 301 - 308.

E. Werner, H. J. Böhm, W. Prantl, F. G. Rammerstorfer:
"Plasticity and Damage of a Fiber Reinforced Aluminum Alloy: Experiments and Micromechanical Modeling";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 78 (1998), Supplement 1; 77 - 80.

T. Antretter, A.F. Plankensteiner, F.D. Fischer, F. G. Rammerstorfer:
"Multiscale Modeling of Highly Heterogeneous MMCs";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 79 (1999), Supplement 1; 127 - 130.

V. A. Buryachenko, F. G. Rammerstorfer:
"On the Thermoelasticity of Random Structure Particulate Composites";
Zeitschrift für Angewandte Mathematik und Physik, 50 (1999), 6; 934 - 947.

T. Daxner, F. G. Rammerstorfer, H. J. Böhm:
"Mesoscopic Simulation of Inhomogeneous Metallic Foams with Respect to Energy Absorption";
Computational Materials Science, 16 (1999), 1-4; 61 - 69.

H.E. Dechant, O. Friedrich, F. G. Rammerstorfer, F.G. Barth:
"Tactile Hairs of a Spider I: Mechanics and Finite Element Analysis";
Zoologie, 102 (1999), ##.

F.D. Fischer, F. G. Rammerstorfer:
"A Refined Analysis of Sloshing Effects in Seismically Excited Tanks";
International Journal of Pressure Vessels and Piping, 76 (1999), 693 - 709.

N. Friedl, F. G. Rammerstorfer, F.D. Fischer:
"Zum Beulen von Platten unter globalem Zug";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 79 (1999), Supplement 2; 545 - 546.

R. Gradinger, F. G. Rammerstorfer:
"On the Influence of Meso-Inhomogeneities on the Crush-Worthiness of Metal Foams";
Acta Materialia, 47 (1999), 1; 143 - 148.

L.J. Martikainen, F. G. Rammerstorfer:
"Modelling the Local Failure Modes in Thin-Faced Sandwich Panels";
Strojnícky Casopis (Journal of Mechanical Engineering), 50 (1999), 241 - 252.

H. Pettermann, A. F. Plankensteiner, H. J. Böhm, F. G. Rammerstorfer:
"A Thermo-Elasto-Plastic Constitutive Law for Inhomogeneous Materials Based on an Incremental Mori-Tanaka Approach";
Computers and Structures, 71 (1999), 2; 197 - 214.

F. G. Rammerstorfer, A.F. Plankensteiner, F.D. Fischer, T. Antretter:
"Hierarchical Models for Simulating the Mechanical Behavior of Heterogeneous Materials - An Approach to High Speed Tool Steels";
Materials Science and Engineering A, 259 (1999), 1; 73 - 84.

M. Seitzberger, F. G. Rammerstorfer:
"Study of Axisymmetric Crushing Mechanisms by Sequential Limit Analysis";
International Journal of Crashworthiness, 4 (1999), 379 - 393.

V.V. Silberschmidt, F. G. Rammerstorfer, E. Werner, F.D. Fischer:
"On Material Immanent Ratchetting of Two-Phase Materials under Purely Thermal Loading";
Archive of Applied Mechanics, 69 (1999), 9-10; 727 - 750.

V. A. Buryachenko, F. G. Rammerstorfer:
"On the thermo-elasto-statics of composites with coated randomly distributed inclusions";
International Journal of Solids and Structures, 37 (2000), 23; 3177 - 3200.

C.M. Chimani, F. G. Rammerstorfer, H. J. Böhm:
"On Curvature Effects on the Materials Description of Unidirectionally Reinforced Composite Materials";
Computer Methods in Applied Mechanics and Engineering, 185 (2000), 2-4; 191 - 201.

T. Daxner, H. J. Böhm, F. G. Rammerstorfer, R. Denzer, M. Maier:
"Simulation des elasto-plastischen Materialverhaltens von Metallschaum mit Hilfe von 2D und 3D Einheitszellen-Modellen";
Materialwissenschaft und Werkstofftechnik, 31 (2000), 447 - 450.

T. Daxner, F. G. Rammerstorfer, H. J. Böhm:
"Adaptation of Density Distributions for Optimising Aluminium Foam Structures";
Materials Science and Technology, 16 (2000), 7-8; 935 - 939.

F.D. Fischer, F. G. Rammerstorfer:
"A Note on a Simple Recategorisation of Cracks in Fatigue Analysis";
Engineering Fracture Mechanics, 66 (2000), 1; 41 - 49.

F.D. Fischer, F. G. Rammerstorfer, N. Friedl, W. Wieser:
"Buckling Phenomena Related to Rolling and Levelling of Sheet Metal";
International Journal of Mechanical Sciences, 42 (2000), 10; 1887 - 1910.

N. Friedl, F. G. Rammerstorfer, F.D. Fischer:
"Buckling of stretched strips";
Computers and Structures, 78 (2000), 1-3; 185 - 190.

M. Seitzberger, F. G. Rammerstorfer, R. Gradinger, H.P. Degischer, M. Blaimschein, C. Walch:
"Experimental Studies on the Quasi-Static Axial Crushing of Steel Columns Filled with Aluminium Foam";
International Journal of Solids and Structures, 37 (2000), 30; 4125 - 4147.

W.K. Vonach, F. G. Rammerstorfer:
"The Effects of In-Plane Core Stiffness on the Wrinkling Behavior of Thick Sandwiches";
Acta Mechanica, 141 (2000), 1-2; 1 - 10.

W.K. Vonach, F. G. Rammerstorfer:
"Wrinkling of Thick Orthotropic Sandwich Plates under General Loading Conditions";
Archive of Applied Mechanics, 70 (2000), 5; 338 - 348.

H.E. Dechant, F. G. Rammerstorfer, F.G. Barth:
"Arthropod Touch Reception: Stimulus Transformation and Finite Element Model of Spider Tactile Hairs";
Journal of Comparative Physiology A, 187 (2001), 4; 313 - 322.

F. G. Rammerstorfer, F.D. Fischer, N. Friedl:
"Buckling of Free Infinite Strips Under Residual Stresses and Global Tension";
Journal of Applied Mechanics, 68 (2001), 3; 399 - 404.

P. Rosenkranz, K. Humer, H. W. Weber, D. H. Pahr, F. G. Rammerstorfer:
"Static and Dynamic Scaling Experiments on Double Lap Shear Specimens at Room Temperature and at 77 K";
Cryogenics, 41 (2001), 1; 21 - 25.

W.K. Vonach, F. G. Rammerstorfer:
"A General Approach to the Wrinkling Instability of Sandwich Plates";
Structural Engineering and Mechanics, 12 (2001), 4; 363 - 376.

V. A. Buryachenko, F. G. Rammerstorfer, A. F. Plankensteiner:
"A Local Theory of Elastoplastic Deformation of Two-Phase Metal Matrix Random Structure Composites";
Journal of Applied Mechanics, 69 (2002), 4; 489 - 496.

D. H. Pahr, F. G. Rammerstorfer, P. Rosenkranz, K. Humer, H. W. Weber:
"A study of short-beam-shear and double-lap-shear specimens of glass fabric/epoxy composites";
Composites - Part B: Engineering, 33 (2002), 125 - 132.

T. Daxner, F. G. Rammerstorfer, J. Segurado, H. E. Pettermann:
"Numerical Simulations of the Creep Deformation of MMCs in 4-Point Bending Mode";
Journal of Engineering Materials and Technology, 125 (2003), 1; 50 - 55.

F.D. Fischer, F. G. Rammerstorfer, N. Friedl:
"Residual Stress-Induced Center Wave Buckling of Rolled Strip Metal";
Journal of Applied Mechanics, 70 (2003), 84 - 90.

J. Eberhardsteiner, H.A. Mang, F. G. Rammerstorfer:
"Preface: Special Issue on The Fifth World Congress on Computational Mechanics";
International Journal for Numerical Methods in Engineering, 60 (2004), 1; 1 - 2.

M.H. Luxner, T. Daxner, F. G. Rammerstorfer:
"Optimization of Mechanically Coupled Composite Pipes by Genetic Algorithms";
Proceedings in Applied Mathematics and Mechanics, 4 (2004), 1; 620 - 621.

D. H. Pahr, F. G. Rammerstorfer:
"A Fast Multi-Scale Analyzing Tool for the Investigation of Perforated Laminates";
Computers and Structures, 82 (2004), 227 - 239.

D. H. Pahr, F. G. Rammerstorfer:
"Experimental and Numerical Investigations of Perforated CFR Woven Fabric Laminates";
Composites Science and Technology, 64 (2004), 9; 1403 - 1410.

D. H. Pahr, C. Schuecker, F. G. Rammerstorfer, H. E. Pettermann:
"Numerical Investigations of Perforated Laminates in the Presence of Residual Ply Stresses";
Journal of Composite Materials, 38 (2004), 22; 1977 - 1991.

I.C. Skrna-Jakl, F. G. Rammerstorfer:
"Leichtbau mit Faserverbundwerkstoffen, Teil 1";
Architektur & Bauforum - Forum, 246 (2004), 9 - 11.

I.C. Skrna-Jakl, F. G. Rammerstorfer:
"Leichtbau mit Faserverbundwerkstoffen, Teil 2";
Architektur & Bauforum - Forum, 250 (2004), 9 - 11.

T. Daxner, M.H. Luxner, F. G. Rammerstorfer:
"Pre-Tensioned Belts Overhanging Elastic Rollers";
PAMM, 5 (2005), 1; 649 - 650.

T. Daxner, F. G. Rammerstorfer, F.D. Fischer:
"Instability Phenomena During the Conical Expansion of Circular Cylindrical Shells";
Computer Methods in Applied Mechanics and Engineering, 194 (2005), 2591 - 2603.

F.D. Fischer, N. Friedl, A. Noé, F. G. Rammerstorfer:
"A Study of the Buckling Behaviour of Strips and Plates with Residual Stress";
Steel Research International, 76 (2005), 4; 327 - 335.

H.E. Dechant, B. Hößl, F. G. Rammerstorfer, F.G. Barth:
"Arthropod Mechanoreceptive Hairs: Modeling the Directionality of the Joint";
Journal of Comparative Physiology A, 192 (2006), 1271 - 1278.

F.D. Fischer, F. G. Rammerstorfer, T. Daxner:
"Flaring - An Analytical Approach";
International Journal of Mechanical Sciences, 48 (2006), 11; 1246 - 1255.

B. Hößl, H. J. Böhm, F. G. Rammerstorfer, R. Müllan, F.G. Barth:
"Studying Arachnid Slit Sensilla by a Fracture Mechanical Approach: Kachanov's Method and Slit Face Displacements";
Journal of Biomechanics, 39 (2006), 10; 1761 - 1768.

D. H. Pahr, F. G. Rammerstorfer:
"Buckling of Honeycomb Sandwiches: Periodic Finite Element Considerations";
Computer Modeling in Engineering and Sciences, 12 (2006), 3; 229 - 241.

F. G. Rammerstorfer, D. H. Pahr, T. Daxner, W.K. Vonach:
"Buckling in Thin Walled Micro and Meso Structures of Lightweight Materials and Material Compounds";
Computational Mechanics, 37 (2006), 6; 470 - 478.

B. Hößl, H. J. Böhm, F. G. Rammerstorfer, F.G. Barth:
"Finite Element Modeling of Arachnid Slit Sensilla - I. The Mechanical Significance of Different Slit Arrays";
Journal of Comparative Physiology A, 193 (2007), 4; 445 - 459.

R.D. Bitsche, Z. Khalil, U. Noster, F. G. Rammerstorfer:
"Simulation von Stahl-Leichtmetall Verbundguss Strukturen - Herstellung und mechanisches Verhalten";
Druckguss, 2008 (2008), 07; 283 - 288.

B. Hößl, H. J. Böhm, C.F. Schaber, F. G. Rammerstorfer, F.G. Barth:
"Finite Element Modeling of Arachnid Slit Sensilla: II. Actual Lyriform Organs and the Face Deformations of the Individual Slits";
Journal of Comparative Physiology A, 195 (2009), 9; 881 - 894.

P. Schuller-Götzburg, M. Pleschberger, F. G. Rammerstorfer, C. Krenkel:
"3D-FEM and Histomorphology of Mandibular Reconstruction with the Titanium Functionally Dynamic Bridging Plate";
International Journal of Oral and Maxillofacial Surgery, 38 (2009), 12; 1298 - 1305.

M.J. Cordill, F.D. Fischer, F. G. Rammerstorfer, G. Dehm:
"Adhesion Energies of Cr Thin Films on Polyimide Determined from Buckling: Experiment and Model;";
Acta Materialia, 58 (2010), 16; 5520 - 5531.

T. Daxner, F.D. Fischer, F. G. Rammerstorfer:
"Stability of Rod-Shaped Nanoparticles Embedded in an Elastic Matrix";
Philosophical Magazine, 90 (2010), 15; 2027 - 2048.

D. Holec, M.A. Hartmann, F.D. Fischer, F. G. Rammerstorfer, P.H. Mayrhofer, O. Paris:
"Curvature-Induced Excess Surface Energy of Fullerenes: Density Functional Theory and Monte Carlo Simulations";
Physical Review B, 81 (2010), 23; 235403.

M. Todt, F. G. Rammerstorfer, O. Paris, F.D. Fischer:
"Nanomchanical Studies of the Compressive Behavior of Carbon Fibers";
Journal of Materials Science, 45 (2010), 24; 6845 - 6848.

C. Bilik, F. G. Rammerstorfer, G. Figala, B. Buchmayr:
"Computational Modelling of Laser Treatment of Plates for Increased Buckling Loads and Natural Frequencies";
Journal of Mechanical Engineering Science, 225 (2011), 10; 2385 - 2398.

M. Todt, F. G. Rammerstorfer, F.D. Fischer, P.H. Mayrhofer, D. Holec, M.A. Hartmann:
"Continuum Modeling of van der Waals Interactions Between Carbon Onion Layers";
Carbon, 49 (2011), 5; 1620 - 1627.

C. Bilik, D. H. Pahr, F. G. Rammerstorfer:
"A Bead Laying Algorithm for Enhancing the Stability and Dynamic Behavior of Thin-Walled Structures";
Acta Mechanica, 223 (2012), 8; 1621 - 1631.

J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer, H.A. Mang, M. Pöll:
"ECCOMAS 2012 - Sixth European Congress on Computational Methods in Applied Sciences and Engineering";
Computer Assisted Methods in Engineering and Science, 19 (2012), 305 - 308.

B. Daum, G. Dehm, H. Clemens, M. Rester, F.D. Fischer, F. G. Rammerstorfer:
"Elastoplastic Buckling as Source of Misinterpretation of Micropillar Tests";
Acta Materialia, 61 (2013), 13; 4996 - 5007.

M.A. Hartmann, M. Todt, F. G. Rammerstorfer, F.D. Fischer, O. Paris:
"Elastic Properties of Graphene Obtained by Computational Mechanical Tests";
EPL (Europhysics Letters), 103 (2013), 68004.

F. Toth, F. G. Rammerstorfer, M.J. Cordill, F.D. Fischer:
"Detailed Modelling of Delamination Buckling of Thin Films under Global Tension";
Acta Materialia, 61 (2013), 7; 2425 - 2433.

I.C. Skrna-Jakl, D. H. Pahr, K.H. Karner, F. G. Rammerstorfer:
"Homogenization Technique for the Efficient Modeling of Large Scale Corrugated Core Sandwich Structures";
International Journal of Applied Physics and Mathematics, 4 (2014), 1; 62 - 67.

M. Todt, R.D. Bitsche, M.A. Hartmann, F.D. Fischer, F. G. Rammerstorfer:
"Growth Limit of Carbon Onions - A Continuum Mechanical Study";
International Journal of Solids and Structures, 51 (2014), 3-4; 706 - 715.


Contributions to Books


F. G. Rammerstorfer:
"Jump Phenomena Associated with the Stability of Geometrically Nonlinear Structures";
in: "Recent Advances in Nonlinear Computational Mechanics", E. Hinton, D.R.J. Owen, C. Taylor (ed.); Pineridge Press, Swansea U.K., 1982, ISBN: 0906674190, 119 - 153.

F. G. Rammerstorfer, F.D. Fischer, E.T. Till, W. Mitter, O. Gründler:
"The Influence of Creep and Transformation Plasticity in the Analysis of Stresses Due to Heat-Treatment";
in: "Numerical Methods in Heat Transfer", R.W. Lewis, K. Morgan, B.A. Schrefler (ed.); J.Wiley & Sons, Chichester, 1983, 447 - 459.

W. Auli, F. G. Rammerstorfer:
"On the Dynamic Instability of Shell Structures - Criteria and Algorithms";
in: "Finite Element Methods for Plate and Shell Structures", T.J.R. Hughes, E. Hinton (ed.); Pineridge Press, Swansea U.K., 1986, 58 - 82.

F. Ziegler, F. G. Rammerstorfer:
"Thermoelastic Stability";
in: "Thermal Stresses III", R.B. Hetnarski (ed.); Elsevier Science Publishers B.V., Amsterdam, 1989, 107 - 189.

F.D. Fischer, E. Hinteregger, F. G. Rammerstorfer:
"A Computational Study of the Residual Stress Distribution in Thermally Loaded Beams of Arbitrary Cross-Section on Frictional Support";
in: "Nonlinear Computational Mechanics - State of the Art", P. Wriggers, W. Wagner (ed.); Springer-Verlag, Berlin, 1991, 737 - 780.

F.D. Fischer, F. G. Rammerstorfer, K. Scharf:
"Earthquake Resistant Design of Anchored and Unanchored Liquid Storage Tanks Under Three-Dimensional Earthquake Excitation";
in: "Structural Dynamics - Recent Advances", G.I. Schueller (ed.); Springer-Verlag, Wien, 1991, 317 - 371.

F. G. Rammerstorfer, K. Dorninger, A. Starlinger:
"Nonlinear Finite Element Analysis of Composite and Sandwich Shell Structures";
in: "Nonlinear Computational Mechanics - State of the Art", P. Wriggers, W. Wagner (ed.); Springer-Verlag, Berlin, 1991, 332 - 359.

T.J. Reiter, F. G. Rammerstorfer, H. J. Böhm:
"Numerical Simulation of Internal and Surface Bone Remodelling";
in: "Engineering Optimization in Design Processes", H.A. Eschenauer, C. Matthek, N. Olhoff (ed.); issued by: Lecture Notes in Engineering, 63; Springer-Verlag, Berlin, 1991, 333 - 340.

F. G. Rammerstorfer, K. Dorninger, A. Starlinger:
"Composite and Sandwich Shells";
in: "Nonlinear Analysis of Shells by Finite Elements", F. G. Rammerstorfer (ed.); issued by: CISM Courses and Lectures No.328; Springer-Verlag, Wien New York, 1992, ISBN: 3-211-82416-2, 131 - 194.

F. G. Rammerstorfer, H. J. Böhm:
"Micromechanics for Macroscopic Material Description of FRPs";
in: "Engineering Mechanics of Fibre Reinforced Polymers and Composite Structures", J. Hult, F. G. Rammerstorfer (ed.); issued by: CISM Courses and Lectures No. 348; Springer-Verlag, Wien New York, 1994, 9 - 49.

F. G. Rammerstorfer, K. Dorninger, A. Starlinger, I.C. Skrna-Jakl:
"Computational Methods in Composite Analysis and Design";
in: "Engineering Mechanics of Fibre Reinforced Polymers and Composite Structures", J. Hult, F. G. Rammerstorfer (ed.); issued by: CISM Courses and Lectures No. 348; Springer-Verlag, Wien New york, 1994, ISBN: 3-211-82652-1, 209 - 231.

F. G. Rammerstorfer, A. Starlinger:
"Lamination Theory and Failure Mechanisms in Composite Shells";
in: "Engineering Mechanics of Fibre Rein-forced Polymers and Composite Structures", J. Hult, F. G. Rammerstorfer (ed.); issued by: CISM Courses and Lectures No. 348; Springer-Verlag, Wien New York, 1994, ISBN: 3-211-82652-1, 73 - 110.

N. Friedl, F. G. Rammerstorfer, F.D. Fischer:
"On the Buckling of Plates Under Global Tension";
in: "Advances in Finite Element Procedures and Technigues", B.H.V. Topping (ed.); Civil Comp Press, Edinburgh, 1998, 73 - 77.

E. Sim, T.J. Reiter, W. Freimüsser, F. G. Rammerstorfer:
"Untersuchungen zu den Spannungsverteilungen im kranialen Femur nach Stabilisierung einer pertrochantären Modellfraktur unter Verwendung der Finite-Elemente-Methode: Ein Vergleich zweier Implantate";
in: "Der Gamma-Nagel - Standortbestimmung nach den ersten zehn Jahren", R.H. Gahr, K.-S. Leung, ;.P. Rosenwasser, W. Roth (ed.); Einhorn-Presse Verlag GmbH, Reinbek, Reinbek, 1998, 293 - 300.

F. G. Rammerstorfer, H. J. Böhm:
"Finite Elements in Micromechanics of Composite and Foam Materials";
in: "Computational Mechanics for the Twenty-First Century", B.H.V. Topping (ed.); Saxe-Coburg Publications, Edinburgh, 2000, ISBN: 1-874672-13-x, 145 - 164.

T. Daxner, H. J. Böhm, F. G. Rammerstorfer, M. Seitzberger:
"Modeling of Cellular Materials";
in: "Handbook of Cellular Metals", H.P. Degischer, B. Kriszt (ed.); Wiley-VCH, Weinheim, 2002, ISBN: 3-527-30339-1, 245 - 280.

F. G. Rammerstorfer, T. Daxner, H. J. Böhm:
"Modeling and Simulation - Introduction";
in: "Handbook of Cellular Metals", H.P. Degischer, B. Kriszt (ed.); Wiley-VCH, Weinheim, 2002, ISBN 3-527-39339-1, 243 - 245.

F. G. Rammerstorfer, F.D. Fischer, N. Friedl, T. Daxner:
"Instabilities Resulting from the Production Process of Plates and Shells";
in: "Innovation in Computational Strcutures Technology", B.H.V. Topping, G. Montero, R. Montenegro (ed.); Saxe-Coburg Publications, Stirlingshire, 2006, ISBN: 1-874672-27-x, 205 - 223.

T. Daxner, D. H. Pahr, F. G. Rammerstorfer:
"Micro- and Meso-Instabilities in Structured Materials and Sandwich Structures";
in: "Buckling and Postbuckling Structures: Experimental, Analytical and Numerical Studies", B. G. Falzon, F. M. H. Aliabadi (ed.); Imperial College Press, London, 2008, ISBN: 1860947948, 453 - 495.

F. G. Rammerstorfer, B. Hößl, H.E. Dechant, H. J. Böhm, F.G. Barth:
"Computational Biomechanics of Sensory Organs in Spiders";
in: "Trends in Engineering Computational Technology", B.H.V. Topping, M. Papadrakakis (ed.); Saxe-Coburg Publications, 2008, ISBN: 978-1-874672-36-4, 321 - 334.

F. G. Rammerstorfer, T. Daxner:
"Berechnungs- und Design-Konzepte für den Leichtbau";
in: "Leichtbau", H.P. Degischer, S. Lüftl (ed.); Wiley-VCH, Weinheim, 2009, ISBN: 978-3-527-32372-2, 14 - 49.

T. Flatscher, T. Daxner, D. H. Pahr, F. G. Rammerstorfer:
"Optimization of Corrugated Paperboard under Local and Global Buckling Constraints";
in: "Multiscale Methods in Computational Mechanics", R. de Borst, E. Ramm (ed.); Springer-Verlag, Dordrecht, 2011, ISBN: 978-90-481-9808-5, 329 - 346.


Contributions to Proceedings


H. J. Böhm, F. G. Rammerstorfer:
"Influence of the Micro-Arrangement on Matrix and Fiber Damage in Continuously Reinforced MMCs";
in: "Micromechanics of Plasticity and Damage of Multiphase Materials", A. Pineau, A. Zaoui (ed.); Kluwer Academic Publishers, Dordrecht, 1996, ISBN: 978-0-7923-4188-8, 19 - 26.

V.A. Buryachenko, H. J. Böhm, F. G. Rammerstorfer:
"Modeling the Overall Elastoplastic Behavior of Multiphase Materials by the Effective Field Method";
in: "Micromechanics of Plasticity and Damage of Multiphase Materials", A. Pineau, A. Zaoui (ed.); Kluwer Academic Publishers, Dordrecht, 1996, ISBN: 978-0-7923-4188-8, 35 - 42.

I.C. Skrna-Jakl, F. G. Rammerstorfer:
"An Analysis Concept for Investigating Global and Local Effects in Stiffened Composite Structures";
in: "Advances in Analysis and Design of Composites", B.H.V. Topping (ed.); Civil Comp Press, Edinburgh, 1996, 1 - 10.

M.A. Stiftinger, F. G. Rammerstorfer:
"Semi-Analytical Finite Element Formulations for Delamination Prediction in Layered Composite Structures";
in: "Advances in Analysis and Design of Composites", B.H.V. Topping (ed.); Civil Comp Press, Edinburgh, 1996, 61 - 72.

M.A. Stiftinger, F. G. Rammerstorfer, A. Starlinger:
"Face Layer Wrinkling in Anisotropic Sandwiches";
in: "Sandwich Construction 3", H.G. Allen (ed.); Chameleon Press, London, 1996, 325 - 334.

C.M. Chimani, H. J. Böhm, F. G. Rammerstorfer, C. Hausmann:
"Free Edge Effects at Interfaces in Selectively Reinforced Structures";
in: "Damage and Failure of Interfaces", HP Rossmanith (ed.); A.A. Balkema, Rotterdam, 1997, ISBN: 90-5410-899-1, 91 - 98.

V.A. Buryachenko, F. G. Rammerstorfer:
"Micromechanics and Nonlocal Effects in Graded Random Structure Matrix Composites";
in: "Transformation Problems in Composite and Active Materials", Y.A. Bahei-el-Din, G.J. Dvorak (ed.); Kluwer Academic Publishers, Dordrecht, 1998, ISBN: 978-0-7923-5122-1, 197 - 206.

N. Friedl, F. G. Rammerstorfer, F.D. Fischer:
"On the Buckling of Plates under Global Tension";
in: "Computational Structures Technology IV", B.H.V. Topping (ed.); Civil Comp Press, Edinburgh, 1998, 73 - 77.

W.K. Vonach, F. G. Rammerstorfer:
"Effects of In-Plane Stiffness on the Wrinkling Load of Sandwich Constructions";
in: "Sandwich Construction 4", K.A. Olsson (ed.); EMAS Publishing, Warley, 1998, 155 - 166.

H. J. Böhm, C.M. Chimani, H. E. Pettermann, A.F. Plankensteiner, F. G. Rammerstorfer:
"Multiscale Treatment of Inhomogeneous Materials by Finite Elements";
in: "Discretization Methods in Structural Mechanics", H.A. Mang, F. G. Rammerstorfer (ed.); Kluwer Academic Publishers, Dordrecht, 1999, ISBN: 978-0-7923-5591-5, 257 - 264.

T. Daxner, H. J. Böhm, F. G. Rammerstorfer:
"Influence of Micro- and Meso-Topological Properties on the Crash-Worthiness of Aluminium Foams";
in: "Metal Foams and Porous Metal Structures", J. Banhart, M.F. Ashby, N. A. Fleck (ed.); Verlag MIT Publishing, Bremen, 1999, 283 - 288.

R. Gradinger, M. Seitzberger, F. G. Rammerstorfer, H.P. Degischer, M. Blaimschein, C. Walch:
"Aluminium Foam Filled Steel Tubes as Composite Shock Absorbers";
in: "Metal Foams and Porous Metal Structures", J. Banhart, M.F. Ashby, N. A. Fleck (ed.); Verlag MIT Publishing, Bremen, 1999, 313 - 316.

R.B. Stewart, F. Marketz, W.C.M. Lohbeck, F.D. Fischer, W. Daves, F. G. Rammerstorfer, H. J. Böhm:
"Expandable Wellbore Tubulars";
in: "Proceedings of the 1999 SPE Technical Symposium", Society of Petroleum Engineers, Dubai, 1999, ISBN: 978-1-61399-106-0.

H. J. Böhm, A. Eckschlager, W. Han, F. G. Rammerstorfer:
"3/D Arrangement Effects in Particle Reinforced Metal Matrix Composites";
in: "Plastic and Viscoplastic Response of Materials and Metal Forming", A.S. Khan, H. Zhang, Y. Yuan (ed.); NEAT Press, Fulton, MD, 2000, 466 - 468.

H.P. Degischer, F. G. Rammerstorfer, O. Beffort:
"Design Rules for Selective Reinforcement of Mg Castings by MMC Inserts";
in: "Magnesium Alloys and their Applications", K. Kainer (ed.); Wiley-VCH, Weinheim, 2000, ISBN: 97-83527309-75-7, 207 - 214.

W.K. Vonach, T. Daxner, F. G. Rammerstorfer:
"In-Situ Sandwiches with Optimized Metal Foam Cores";
in: "Sandwich Construction 5", H.R. Meyer-Piening, D. Zenkert (ed.); EMAS Publishing, Solihull, UK, 2000, ISBN: 978-1-901537-18-5, 291 - 300.

C. Motz, R. Pippan, A. Ableidinger, H. J. Böhm, F. G. Rammerstorfer:
"Deformation and Fracture Behavior of Ductile Aluminium Foams in the Presence of Notches under Tensile Loading";
in: "Cellular Metals and Metal Foaming Technology", J. Banhart, M.F. Ashby, N. A. Fleck (ed.); Verlag MIT Publishing, Bremen, 2001, 299 - 304.

D. H. Pahr, T. Daxner, F. G. Rammerstorfer, H. J. Böhm:
"On Micro/Meso/Macro Modeling of Composite Lightweight Materials and Structures";
in: "Computational Mechanics: New Frontiers for the New Millenium", S. Valiappan, N. Khalili (ed.); Elsevier, Amsterdam, 2001, ISBN: 00-80439-81-0, 753 - 762.

D. H. Pahr, F. G. Rammerstorfer:
"Experimental and Numerical Determinaion of the Inter-Laminar Shear Strength for Short-Beam-Shear and Double-Lap-Shear Specimens";
in: "Proceedings of the 6th 6th International Conference on Deformation and Failure of Composites", IOM Publications, London, 2001, 357 - 365.

D. H. Pahr, F. G. Rammerstorfer, P. Rosenkranz, K. Humer, H. W. Weber:
"Numerical Investigations of Different Inter-Laminar Shear Strength Specimens";
in: "Proc. ICCE/8", D. Hui (ed.); University of New Orleans, 2001, 709 - 710.

D. H. Pahr, F. G. Rammerstorfer:
"Meso-Macro Analyses of Perforated Laminates";
in: "Proceedings of the International Conference on New Challenges in Mesomechanics", R. Pyrz, J. Schjødt-Thomsen, J. C. Rauhe, T. Thomsen, L. R. Jensen (ed.); Aalborg University, Aalborg, Denmark, 2002, ISBN: 87-89206-59-2, 147 - 154.

D. H. Pahr, F. G. Rammerstorfer:
"Multi-Scale Analyses of Perforated Laminates";
in: "Proceedings of the Fifth World Congress on Compuational Mechanics (WCCM V)", H.A. Mang, F. G. Rammerstorfer, J. Eberhardsteiner (ed.); TU Wien, Wien, 2002, ISBN: 3-9501554-0-6.

P. Rosenkranz, D. H. Pahr, K. Humer, H. W. Weber, F. G. Rammerstorfer:
"Influence of Sample and Test Geometry on the Interlaminar Shear Strength of Fiber Reinforced Plastics under Static and Dynamic Loading at RT and 77K";
in: "Advances in Cryogenic Engineering: Proceedings of the International Cryogenic Materials Conference - ICMC, Volume 48", B. Balachandran, D. Gubser, K.T. Hartwig (ed.); American Institute of Physics, College Park, MD, 2002, ISBN: 0-7354-0060-1, 221 - 228.

T. Daxner, H. J. Böhm, F. G. Rammerstorfer:
"Numerical Investigation of Local Yielding in Metallic Foams";
in: "Cellular Metals - Manufacture, Properties, Applications", J. Banhart, N. A. Fleck, A. Mortensen (ed.); Verlag MIT Publishing, Bremen, 2003, ISBN: 3-935538-12-x, 413 - 418.

T. Daxner, F. G. Rammerstorfer, F.D. Fischer:
"Simulation of Instability Phenomena During the Conical Expansion of a Pipe";
in: "Proceedings der ABAQUS Austria Anwenderkonferenz 2003", ABAQUS Austria, Wien, 2003.

D. H. Pahr, F. G. Rammerstorfer:
"Experimentelle und numerische Untersuchungen von perforierten Laminaten";
in: "Verbundwerkstoffe", H.P. Degischer (ed.); issued by: DGM; Wiley-VCH, Weinheim, 2003, ISBN: 3-527-30762-1, 563 - 568.

D. H. Pahr, F. G. Rammerstorfer:
"Multi-Scale Analyses of Perforated Laminates";
in: "Computational Analysis of Composite Lightweight Structures in Aerosapce Engineering", R. Rolfes, J. Teßmer (ed.); Institut für Strukturmechanik, DLR Braunschweig, Braunschweig, 2003, 75 - 87.

W.K. Vonach, F. G. Rammerstorfer:
"Face Layer Wrinkling in Sandwich Shells of General Configuration";
in: "Computational Fluid and Solid Mechanics 2003", K.J. Bathe (ed.); Elsevier, Amsterdam, 2003, ISBN: 0-08-044046-0, 727 - 731.

T. Daxner, M.H. Luxner, F. G. Rammerstorfer:
"Thermo-Mechanically Interacting Composite Pipes Optimised by Genetic Algorithms";
in: "Proceedings of the 11th European Conference on Composite Materials", European Society of Composite Materials, London, 2004, Paper ID C041, 10 pages.

T. Daxner, F. G. Rammerstorfer, F.D. Fischer:
"Simulation of Material and Structural Instability Phenomena During the Flaring Process of Cylindrical Shells";
in: "Proceedings of the NUMIFORM 2004", S. Ghosh, J.M. Castro, J.K. Lee (ed.); American Institute of Physics, Melville, NY, 2004, ISBN: 0-7354-0189-6, Paper ID N119, 6 pages.

D. H. Pahr, C. Marte, F. G. Rammerstorfer, H. J. Böhm:
"Hierarchical Modelling of Perforated Woven Fabric Laminates";
in: "Proceedings of ECCOMAS 2004", P. Neittaanmäki, M. Rossi, S. Korotov, E. Oñate, J. Périaux, D. Knörzer (ed.); issued by: ECCOMAS; University of Jyväskylä, Jyväskylä, 2004, ISBN: 951-39-1869-6, Paper ID 863, 17 pages.

D. H. Pahr, C. Schuecker, F. G. Rammerstorfer, H. E. Pettermann:
"Investigations of Perforated Laminates in the Presence of Residual Stress";
in: "Proceedings of the 11th European Conference on Composite Materials", European Society of Composite Materials, London, 2004, Paper ID C151, 10 pages.

F. G. Rammerstorfer, D. H. Pahr, T. Daxner, W.K. Vonach:
"Buckling in Thin Walled Macro and Meso Structures of Lightweight Materials and Material Compounds";
in: "Computational Mechanics. Proceedings of the Sixth World Congress on Computational Mechanics", Z.H. Yao, M.W. Yuan, W.X. Zhong (ed.); issued by: IACM; Springer-Verlag, Beijing, 2004, (invited), ISBN: 7-302-09341-5, 570 - 575.

D. H. Pahr, F. G. Rammerstorfer:
"Analytical and Computational Models for Investigations of Local Buckling in Honeycomb Sandwiches";
in: "Thermec 2006, Materials Science Forum Vols. 539-543", T. Chandra, K. Tsuzaki, C. Ravindran, M. Militzer (ed.); Trans Tech Publications Ltd., Zürich, 2007, ISBN: 0-87849-428-6, 2467 - 2472.

F. G. Rammerstorfer, F.D. Fischer, T. Daxner, N. Friedl:
"On Instabilities Appearing during the Production of Plates and Shells";
in: "Proceedings of the 7th EUROMECH Solid Mechanics Conference", J.A.C. Ambrosio, M.P.T. Silva (ed.); Associção Portuguesa de Mecânica Teórica, Aplicada e Computacional, Lissabon, 2009, (invited), 7 - 12.


Talks and Poster Presentations (with Proceedings-Entry)


T. Daxner, M.H. Luxner, F. G. Rammerstorfer:
"Thermo-Mechanically Interacting Composite Pipes Optimised by Genetic Algorithms";
Talk: 11th European Conference on Composite Materials, Rhodos; 05-31-2004 - 06-03-2004; in: "ECCM11 Book of Abstracts", C. Galiotis (ed.); Vol.2 (2004), 43 - 44.

D. H. Pahr, C. Schuecker, F. G. Rammerstorfer, H. E. Pettermann:
"Investigations of Perforated Laminates in the Presence of Residual Stress";
Talk: 11th European Conference on Composite Materials, Rhodos; 05-31-2004 - 06-03-2004; in: "ECCM11 Book of Abstracts", C. Galiotis (ed.); Vol.1 (2004), 352 - 353.

T. Daxner, F. G. Rammerstorfer, F.D. Fischer:
"Flaring of Cylindrical Shells and Associated Instability Phenomena";
Talk: WCCM VI, Beijing (invited); 09-05-2004 - 09-10-2004; in: "Computational Mechanics. Proceedings of the Sixth World Congress on Computational Mechanics", Z.H. Yao, M.W. Yuan, W.X. Zhong (ed.); (2004), ISBN: 7-89494-512-9; Paper ID 513, 9 pages.

N. Friedl, F. G. Rammerstorfer, F.D. Fischer, A. Noé:
"Waviness of Thin Strips - Instabilities during Forming and Heat Treatment Processes";
Talk: 5th International Conference on Computation of Shell and Spatial Structures, Salzburg (invited); 06-01-2005 - 06-04-2005; in: "Extended Abstracts of the 5th International Conference on Computation of Shell and Spatial Structures", E. Ramm, W.A. Wall, K.U. Bletzinger, M. Bischoff (ed.); (2005), Paper ID 137, 4 pages.

F. G. Rammerstorfer, T. Daxner, D. H. Pahr, W.K. Vonach:
"Shell and Truss Structures on the Micro- and Meso-Level of Lightweight Materials";
Talk: 5th International Conference on Computation of Shell and Spatial Structures, Salzburg (invited); 06-01-2005 - 06-04-2005; in: "Extended Abstracts of the 5th International Conference on Computation of Shell and Spatial Structures", E. Ramm, W.A. Wall, K.U. Bletzinger, M. Bischoff (ed.); (2005), Paper ID 132, 4 pages.

B. Hößl, H. J. Böhm, F. G. Rammerstorfer, F.G. Barth:
"Mechanoreception in the Exoskeleton of Arachnids: Engineering Meets Biology";
Talk: Third IASTED International Conference on Biomechanics, Benidorm; 09-07-2005 - 09-09-2005; in: "Proceedings of the Third IASTED International Conference on Biomechanics", M.H. Hamza (ed.); IASTED Acta Press, Anaheim, CA (2005), ISBN: 0-88986-534-5; Paper ID 485-088, 5 pages.

R.D. Bitsche, U. Noster, C. Peterlechner, F. G. Rammerstorfer:
"Simulation von kraft- und formschlüssigen Hybridguss-Verbindungen als Designgrundlage";
Talk: 4. Ranshofener Leichtmetalltage, Salzburg (invited); 10-17-2006 - 10-18-2006; in: "4. Ranshofener Leichtmetalltage 2006 - Vom Werkstoff zum Bauteilsystem", H. Kaufmann, P.J. Uggowitzer, U. Noster (ed.); (2006), ISBN: 3-902092-04-1; 275 - 288.

T. Daxner, T. Flatscher, F. G. Rammerstorfer:
"Optimum Design of Corrugated Board under Buckling Constraints";
Talk: 7th World Congress on Structural and Multidisciplinary Optimization, Seoul; 05-21-2007 - 05-25-2007; in: "Proceedings of the 7th World Congress on Structural and Multidisciplinary Optimization", B.M. Kwak (ed.); BMD Co., Seoul, (2007), ISBN: 978-89-959384-2-3; Paper ID A0306, 10 pages.

R.D. Bitsche, Z. Khalil, U. Noster, F. G. Rammerstorfer:
"Simulation von Stahl-Leichtmetall Verbundguss-Strukturen - Herstellung und Mechanisches Verhalten";
Talk: 5. Ranshofener Leichtmetalltage 2008, Geinberg (invited); 05-28-2008 - 05-29-2008; in: "5. Ranshofener Leichtmetalltage 2008", U. Noster, F. Riemelmoser, P.J. Uggowitzer (ed.); (2008), ISBN: 978-3-902092-05-2; 87 - 98.

F. G. Rammerstorfer, R.D. Bitsche, T. Daxner, F.D. Fischer, T. Flatscher, D. H. Pahr:
"Computational Stability Analysis - Bridging the Length Scales";
Talk: Taiwan-Austria Joint Workshop on Computational Mechanics of Materials and Structures, Taipei (invited); 11-15-2008 - 11-17-2008; in: "Proceedings of the Taiwan-Austria Joint Workshop on Computational Mechanics of Materials and Structures", Y.B. Yang (ed.); National Taiwan University, (2008), 28 - 30.

R.D. Bitsche, F. G. Rammerstorfer:
"Stress Singularities at Interfaces in Structures - Design Charts";
Keynote Lecture: EASEC-11: 11th East Asia-Pacific Conference on Structural Engineering and Construction, Taipei; 11-19-2008 - 11-21-2008; in: "Proceedings of the 11th East Asia-Pacific Conference on Structural Engineering and Construction", Y.B. Yang, L.J. Leu, C.S. Chen, P.C. Su (ed.); National Taiwan University, (2008), ISBN: 978-986-80222-4-9; Paper ID B08_01, 6 pages.

C. Bilik, F. G. Rammerstorfer, T. Daxner, G. Figala, B. Buchmayr:
"Improving the Dynamic and Stability Behaviour of Plates by Laser Treatment";
Talk: 6th International Congress of the Croatian Society of Mechanics, Dubrovnik; 09-30-2009 - 10-02-2009; in: "Proceedings of the 6th ICCSM", I. Smojver, J. Soric (ed.); (2009), ISBN: 978-953-7539-11-5; Paper ID 104, 8 pages.

F. G. Rammerstorfer:
"Status and Trends in Lightweight Materials and Structures";
Talk: 90th Anniversary Conference "Vision of Engineering", Zagreb (invited); 11-09-2009; in: "Visions of Engineering", Izvor Grubisić (ed.); University of Zagreb, Zagreb (2009), ISBN: 978-953-6313-75-4; 21 - 32.

C. Bilik, F. G. Rammerstorfer, G. Figala, B. Buchmayr:
"Investigation of the Stability and Dynamic Behaviour of Plates Subjected to Laser Treatment";
Poster: Junior Scientist Conference 2010, Wien; 04-07-2010 - 04-09-2010; in: "Proceedings of the Junior Scientist Conference 2010", H. Kaiser, R. Kirner (ed.); (2010), ISBN: 978-3-200-01797-9; 71 - 72.

M. Todt, F. G. Rammerstorfer:
"On the van der Waals Interactions Between Carbon Onion Layers";
Poster: Junior Scientist Conference 2010, Wien; 04-07-2010 - 04-09-2010; in: "Proceedings of the Junior Scientist Conference 2010", H. Kaiser, R. Kirner (ed.); (2010), ISBN: 978-3-200-01797-9; 215 - 216.

C. Bilik, D. H. Pahr, F. G. Rammerstorfer:
"A Bead Laying Algorithm for Enhancing the Dynamic and Stability Behaviour of Thin Shell Structures";
Talk: 37th Solid Mechanics Conference, Warschau; 09-06-2010 - 09-10-2010; in: "37th SolMech 2010 Book of Abstracts", Polish Academy of Science, Warschau (2010), 302 - 303.

C. Bilik, F. G. Rammerstorfer:
"Instabilitäten während des Walzens von Profilen und im Einsatz von gewalzten Profilen";
Talk: XXX. Verformungskundliches Kolloquium, Planneralm; 02-26-2011 - 03-01-2011; in: "XXX. Verformungskundliches Kolloquium", B. Buchmayr (ed.); Montanuniversität Leoben, (2011), ISBN: 978-3-902078-15-5; 93 - 96.

M. Todt, F. G. Rammerstorfer, M.A. Hartmann, O. Paris, F.D. Fischer:
"Shell-Models for Multi-Layer Carbon Nano-Particles;";
Talk: EC 527 Shell-Like Structures - Non-Classical Theories and Applications, Wittenberg (invited); 08-22-2011 - 08-26-2011; in: "Shell-Like Structures", H. Altenbach, V.A. Eremeyev (ed.); Springer-Verlag, Berlin (2011), ISBN: 978-3-642-21854-5; 585 - 602.

C. Bilik, F. G. Rammerstorfer:
"Computational Design Tools for Increase of Buckling Resistance of Lightweight Structures";
Talk: Trends and Challenges in Computational Mechanics, Padua (invited); 09-12-2011 - 09-14-2011; in: "Trends and Challenges in Computational Mechanics", G. Zavarise, S. Reese (ed.); Universita degli Studi di Padova, (2011), ISBN: 978-88-96477-22-9; 139 - 140.

M. Todt, M.A. Hartmann, O. Paris, F.D. Fischer, F. G. Rammerstorfer:
"Computational Treatment of the Stability of Multi-Layered Carbon Nanoparticles";
Talk: 7th International Conference on Computational Mechanics of Spatial Structures (IASS-IACM 2012), Sarajevo; 04-02-2012 - 04-04-2012; in: "Proceedings of the 7th International Conference on Computational Mechanics of Spatial Structures", A. Ibrahimbegovic, S Dolarevic, M. Hrasnica, M. Madzarevic, M. Zlatar (ed.); Faculty of Civil Engineering Sarajevo, (2012), ISBN: 978-9-958-63830-5; 307 - 309.

B. Daum, F. G. Rammerstorfer, F.D. Fischer, G. Dehm:
"Buckling Phenomena Associated with Micro-Pillar Testing";
Talk: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering, Wien (invited); 09-10-2012 - 09-14-2012; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)", J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (ed.); TU Wien, Wien (2012), ISBN: 978-3-9502481-9-7; Paper ID 4425, 2 pages.

M.A. Hartmann, M. Todt, D. Holec, P.H. Mayrhofer, O. Paris, F.D. Fischer, F. G. Rammerstorfer:
"Atomistic Modeling of the Mechanical Stability Behavior of Fullerenes";
Keynote Lecture: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering, Wien (invited); 09-10-2012 - 09-14-2012; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)", J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (ed.); TU Wien, Wien (2012), ISBN: 978-3-9502481-9-7; Paper ID 5008, 2 pages.

F. G. Rammerstorfer, C. Bilik:
"Increase of Buckling Resistance of Thin-Walled Structures Without Changing Mass, Material, Geometry or Boundary Conditions";
Talk: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering, Wien (invited); 09-10-2012 - 09-14-2012; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)", J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (ed.); TU Wien, Wien (2012), ISBN: 978-3-9502481-9-7; Paper ID 2756, 2 pages.

I.C. Skrna-Jakl, D. H. Pahr, F. G. Rammerstorfer:
"Multiscale Computational Design of Large Scale Corrugated Core Sandwich Structures";
Talk: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering, Wien (invited); 09-10-2012 - 09-14-2012; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)", J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (ed.); TU Wien, Wien (2012), ISBN: 978-3-9502481-9-7; Paper ID 1514, 2 pages.

F. Toth, M.J. Cordill, F.D. Fischer, F. G. Rammerstorfer:
"Modeling and Simulation of an Experiment for Determining the Interface Strength Parameters of Thin Films on Compliant Substrates";
Talk: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering, Wien; 09-10-2012 - 09-14-2012; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)", J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (ed.); TU Wien, Wien (2012), ISBN: 978-3-9502481-9-7; Paper ID 4219, 2 pages.

M. Todt, F. G. Rammerstorfer, M.A. Hartmann:
"Continuum Shell Models for Closed Cage Carbon Nanoparticles";
Talk: SSTA2013 Shell Structures Theory and Applications, Gdansk; 10-16-2013 - 10-18-2013; in: "Shell Structures: Theory and Applications", W. Pietraszkiewicz, J. Górski (ed.); CRC Press/Balkema, Leiden (2013), ISBN: 978-1-138-00082-7; 149 - 152.

F. Toth, F. G. Rammerstorfer, M.J. Cordill, F.D. Fischer:
"Modelling of Thin Film Buckling in Compound Specimens under Uniaxial Stretching";
Talk: SSTA2013 Shell Structures Theory and Applications, Gdansk; 10-16-2013 - 10-18-2013; in: "Shell strucutres: Theory and Applications (Vol.3)", W. Pietraszkiewicz, J. Górski (ed.); CRC Press/Balkema, Leiden (2013), ISBN: 978-1-138-00082-7; 247 - 250.

F. G. Rammerstorfer, F. Toth, F.D. Fischer:
"Loss of Stability of Structures under Global Tension - Modeling and Simulation of Some Typical Examples";
Keynote Lecture: 11th World Congress on Compuational Mechanics (WCCM XI), Barcelona; 07-20-2014 - 07-25-2014; in: "Abstracts of the 11th World Congress on Compuational Mechanics", CIMNE, Barcelona (2014).


Talks and Poster Presentations (without Proceedings-Entry)


F. G. Rammerstorfer:
"Festigkeitsuntersuchungen am Erzherzog-Karl-Denkmal";
Talk: Prof. Maurer 75-Jahre-Festkolloquium, Leoben (invited); 03-06-2002.

D. H. Pahr, F. G. Rammerstorfer:
"Multi-Scale Analyses of Perforated Laminates";
Talk: Fifth World Congress on Compuational Mechanics (WCCM V), Wien (invited); 07-07-2002 - 07-12-2002.

D. H. Pahr, F. G. Rammerstorfer:
"Meso-Macro Analyses of Perforated Laminates";
Talk: International Conference on New Challenges in Mesomechanics, Aalborg, Denmark; 08-26-2002 - 08-30-2002.

F. G. Rammerstorfer:
"Micro-Meso-Macro Analysis of Composite Materials and Structures";
Talk: Polnische Akademie der Wissenschaften, Inst. of Fundamental Technology Research, Warschau (invited); 02-08-2003.

D. H. Pahr, S. Hampel, F. G. Rammerstorfer:
"Extensions and Implementation of Puck's Uni-Directional Layered Laminate Damge Model in a Finite-Element Program";
Talk: GAMM Jahreskonferenz 2003, Abano Terme, Italy; 03-24-2003 - 03-28-2003.

F. G. Rammerstorfer, W.K. Vonach:
"Face Layer Wrinkling in Sandwich-Shells of General Configuration";
Talk: 2nd MIT Conference on Computational Fluid and Solid Mechanics, Cambridge, MA (invited); 06-17-2003 - 06-20-2003.

F. G. Rammerstorfer:
"Multiscale Modelling of Cellular Structures";
Keynote Lecture: Met Foam 2003, Berlin (invited); 06-23-2003 - 06-25-2003.

D. H. Pahr, F. G. Rammerstorfer:
"Experimentelle und numerische Untersuchungen von perforierten Laminaten";
Talk: 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien (invited); 07-02-2003 - 07-04-2003.

A. Ableidinger, T. Daxner, H. J. Böhm, F. G. Rammerstorfer:
"Micro/Macro Simulations of Fracture in Open Cell Metallic Foams";
Talk: 5th Euromech Solid Mechanics Conference ESMC-5, Thessaloniki; 08-17-2003 - 08-22-2003.

F. G. Rammerstorfer, F.D. Fischer, N. Friedl:
"Stability Problems Related to Thin Strip Production";
Talk: 5th Euromech Solid Mechanics Conference ESMC-5, Thessaloniki; 08-17-2003 - 08-22-2003.

F. G. Rammerstorfer:
"Instabilitäten beim Erzeugen dünner Bänder";
Talk: Seminar des Instituts für Werkstoffkunde und Werkstoffmechanik der TU München, München (invited); 11-04-2003.

T. Daxner, F. G. Rammerstorfer, F.D. Fischer:
"Simulation von Instabilitäten während des Kegelaufweitens von Rohren";
Talk: FE im Schnee, Hirschegg (invited); 01-14-2004 - 01-17-2004.

F. G. Rammerstorfer:
"FE-Analyse des Erzherzogs Carl von Österreich";
Talk: FE im Schnee, Hirschegg (invited); 01-14-2004 - 01-17-2004.

F. G. Rammerstorfer:
"Was ist Flaring?";
Talk: XXIII. Verformungskundliches Kolloquium, Planneralm (invited); 02-29-2004 - 03-06-2004.

T. Daxner, F. G. Rammerstorfer, F.D. Fischer:
"Simulation of Material and Structural Instability Phenomena During the Flaring Process of Cylindrical Shells";
Talk: Materials Processing and Design: Modeling, Simulation and Applications NUMIFORM 2004, Columbus, OH; 06-13-2004 - 06-17-2004.

D. H. Pahr, C. Marte, F. G. Rammerstorfer, H. J. Böhm:
"Hierarchical Modelling of Perforated Woven Fabric Laminates";
Talk: ECCOMAS 2004 (4th European Congress on Computational Methods in Applied Sciences and Engineering), Jyväskylä (invited); 07-24-2004 - 07-28-2004.

F.G. Barth, B. Hößl, H. J. Böhm, F. G. Rammerstorfer:
"From technical biology to natural technology? The remarkable refinement of spider mechano-sensors";
Talk: Insect Sensors and Robotics, Brisbane (invited); 08-23-2004 - 08-26-2004.

F. G. Rammerstorfer, D. H. Pahr, T. Daxner, N. Friedl:
"Buckling in Thin Walled Macro and Meso Structures of Lightweight Materials and Material Compounds";
Talk: WCCM VI, Beijing (invited); 09-05-2004 - 09-10-2004.

H. E. Pettermann, C. Schuecker, D. H. Pahr, F. G. Rammerstorfer:
"Modeling and Simulation of Aircraft Structures - Stiffness, Damage, and Failure Prediction for Laminated Composites";
Talk: 4th FENet Annual Industry Meeting, Lissabon; 12-02-2004 - 12-03-2004.

F.D. Fischer, F. G. Rammerstorfer, T. Daxner:
"An Analytical Approach to Flaring";
Talk: XXIV. Verformungskundliches Kolloquium, Planneralm (invited); 02-26-2005 - 03-05-2005.

T. Daxner, M.H. Luxner, F. G. Rammerstorfer:
"Pre-Tensioned Belts Overhanging Elastic Rollers";
Talk: 76th Annual Scientific Conference GAMM 2005, Luxembourg; 03-28-2005 - 04-01-2005.

B. Hößl, H. J. Böhm, F. G. Rammerstorfer, R. Müllan, F.G. Barth:
"Engineering Meets Biology: Computer Based Modeling of Spider Strain Detectors";
Talk: 9th Meeting of the Austrian Neuroscience Association, Obergurgl; 06-21-2005 - 06-26-2005.

D. H. Pahr, F. G. Rammerstorfer:
"Analytical and Computational Models for Investigations of Local Buckling in Honeycomb Sandwiches";
Talk: THERMEC 2006 - International Conference on Processing and Manufacturing of Advanced Materials, Vancouver, BC; 07-04-2006 - 07-08-2006.

B. Hößl, H. J. Böhm, F. G. Rammerstorfer, F.G. Barth:
"Arthropod Strain Detectors: I. Modeling the Mechanics of Arachnid Lyriform Organs by Finite Element Models";
Poster: Fifth Forum of European Neuroscience, Wien; 07-08-2006 - 07-12-2006.

I.C. Skrna-Jakl, K.H. Karner, D. H. Pahr, F. G. Rammerstorfer:
"Numerical and Experimental Investigations of the Stiffness and Strength Behavior of Corrugated Core Sandwich Panels";
Talk: 7th World Congress on Computational Mechanics (WCCM-7), Los Angeles, CA; 07-16-2006 - 07-22-2006.

F. G. Rammerstorfer, F.D. Fischer, N. Friedl, T. Daxner:
"Instabilities Resulting from the Production Process of Plates and Shells";
Keynote Lecture: Eighth International Conference on Computational Structures Technology, Las Palmas de Gran Canaria (invited); 09-12-2006 - 09-15-2006.

F. G. Rammerstorfer, T. Daxner, D. H. Pahr, W.K. Vonach:
"Hierarchical Modelling of Composite Materials and Material Compounds for Aerospace Applications";
Talk: Special Lecture at the Department of Aeronautics and Astronautics of the University of Tokyo, Tokyo (invited); 10-10-2006.

F. G. Rammerstorfer, D. H. Pahr, T. Daxner:
"Micro- and Meso-Instabilities in Structured Composite Materials and Material Compounds";
Talk: 19th International Workshop "Research in Mechanics of Composites", Bad Herrenalb; 11-26-2006 - 11-29-2006.

H. J. Böhm, B. Hößl, F. G. Rammerstorfer, F.G. Barth:
"Finite Element Modelling of Slit Sensilla of Arachnids";
Talk: NCBES Seminar, Galway, Irland; 12-11-2006.

F.G. Barth, B. Hößl, C.F. Schaber, S. Gorb, H. J. Böhm, F. G. Rammerstorfer:
"Arthropod Mechanoreceptors: From Biology to Engineering";
Talk: Annual Main Meeting of the Society for Experimental Biology, Glasgow; 03-31-2007 - 04-04-2007.

R.D. Bitsche, F. G. Rammerstorfer:
"Thermischer Kontaktwiderstand an Interfaces von Hybridguss-Verbindungen";
Talk: Meeting des Projekts "Austrian Light Weight Structures", Braunau; 04-10-2007.

T. Daxner, F. G. Rammerstorfer:
"Leichtbauprinzipien - Zielgrößen, Modellbildung, Berechnungsmethoden, Optimierung";
Talk: ASMET Seminar Leichtbau, Ranshofen; 04-13-2007 - 04-14-2007.

T. Daxner, F. G. Rammerstorfer:
"Leichtbau-Konstruktionsprinzipien";
Talk: ASMET Forum für Metallurgie und Werkstofftechnik, Leoben; 05-14-2007 - 05-15-2007.

I.C. Skrna-Jakl, F. G. Rammerstorfer:
"Modellierung und numerische Simulation von Leichtbaumaterialien und Leichtbaustrukturen";
Talk: euroLITE Internationale Fachmesse für Leichtbaukonstruktionen, Salzburg; 06-26-2007 - 06-27-2007.

T. Daxner, T. Flatscher, F. G. Rammerstorfer:
"Weight Reduction of Corrugated Board under Preservation of Buckling Strength";
Poster: 9th US National Congress on Computational Mechanics, San Francisco, CA; 07-22-2007 - 07-26-2007.

F.G. Barth, H. J. Böhm, B. Hößl, F. G. Rammerstorfer:
"Computational Treatment of Slit Sensilla of Spiders - Biomechanics in Neurobiology";
Talk: ECCOMAS Multidisciplinary Jubilee Symposium, Wien (invited); 02-18-2008 - 02-20-2008.

F. G. Rammerstorfer, T. Daxner, D. H. Pahr:
"Zelluläre Strukturen in Natur und Technik";
Keynote Lecture: 5. Ranshofener Leichtmetalltage 2008, Geinberg (invited); 05-28-2008 - 05-29-2008.

F. G. Rammerstorfer, B. Hößl, H.E. Dechant, H. J. Böhm, F.G. Barth:
"Computational Biomechanics of Sensory Organs in Spiders";
Keynote Lecture: Sixth International Conference on Engineering Computational Technology (ECT2008), Athen (invited); 09-02-2008 - 09-05-2008.

T. Flatscher, T. Daxner, F. G. Rammerstorfer:
"Optimization of Corrugated Paper under Local and Global Buckling Constraints";
Talk: Colloquium on Multiscale Methods in Computational Mechanics (MMCM 2009), Rolduc (invited); 03-11-2009 - 03-13-2009.

F. G. Rammerstorfer, F. Fischer, T. Daxner, C. Bilik, N. Friedl:
"On Instabilities Appearing during the Production of Plates and Shells";
Talk: 7th EUROMECH Solid Mechanics Conference - ESMC 2009, Lissabon (invited); 09-07-2009 - 09-11-2009.

F. G. Rammerstorfer:
"Leichtbauprinzipien";
Talk: ASMET Seminar Leichtbau, Wien (invited); 09-24-2009 - 09-25-2009.

M. Todt, F. G. Rammerstorfer, R.D. Bitsche, F.D. Fischer, P.H. Mayrhofer, M.A. Hartmann, D. Holec, O. Paris:
"On the Stability of Carbon Onions";
Talk: GAMM 2010 - 81st Annual Meeting of the International Association of Applied Mathematics and Mechanics, Karlsruhe; 03-22-2010 - 03-26-2010.

D. Holec, M.A. Hartmann, F. G. Rammerstorfer, O. Paris, F.D. Fischer, P.H. Mayrhofer:
"Surface Energy of Carbon Fullerenes and Nanotubes";
Talk: 37th International Conference on Metallurgical Coatings and Thin Films, San Diego, CA; 04-26-2010 - 04-30-2010.

F. G. Rammerstorfer, T. Daxner, F.D. Fischer, T. Flatscher, D. H. Pahr, M. Todt:
"Instabilities in Materials at the Nano, Micro and Meso Scale";
Keynote Lecture: ECCM2010, European Conference on Computational Mechanics 2010, Paris; 05-21-2010 - 05-26-2010.

F. G. Rammerstorfer, C. Bilik:
"Verbesserung des Stabilitätsverhaltens von dünnwandingen Strukturen";
Talk: Workshop des COMET-K2 Kompetenzzentrums MPPE, Leoben; 06-08-2011 - 06-09-2011.

M.A. Hartmann, D. Holec, M. Todt, F.D. Fischer, F. G. Rammerstorfer, P.H. Mayrhofer, O. Paris:
"A Multi-Scale Approach for Studying Carbon Nanostructures";
Talk: Joint Annual Meeting of the Swiss Physical Society and the Austrian Physical Society 2011, Lausanne; 06-15-2011 - 06-17-2011.

M. Todt, F. G. Rammerstorfer, O. Paris, F.D. Fischer:
"Mechanical Behavior of Carbon Crystallites Forming Carbon Fibers";
Talk: ICCE 19, 19th Annual International Conference on Composites/Nano Engineering, Shanghai; 07-24-2011 - 07-30-2011.

G. Figala, B. Buchmayr, C. Bilik, F. G. Rammerstorfer:
"Verbesserung der statischen und dynamischen Eigenschaften von Platten durch lokale Laserbestrahlung";
Talk: Schmiedewerkzeuge: Technologien - Entwicklungen - Analysen, Salzburg; 10-24-2011 - 10-25-2011.

M.A. Hartmann, M. Todt, F. G. Rammerstorfer, D. Holec, P.H. Mayrhofer, F.D. Fischer, O. Paris:
"Simualtion-Based Design of Nanocomposite Metamaterials";
Talk: 10th World Congress on Computational Mechanics (WCCM 2012), São Paulo; 07-08-2012 - 07-13-2012.

M. Todt, M.A. Hartmann, D. Holec, F. G. Rammerstorfer:
"Accessing the Mechanical Behavior of Carbon Fullerenes by Continuum Shell Models";
Talk: 10th World Congress on Computational Mechanics (WCCM 2012), São Paulo; 07-08-2012 - 07-13-2012.

M. Todt, D. Holec, F. G. Rammerstorfer:
"Continuum Mechanical Modeling of Interlayer Defects in Multi-Layered Carbon Nanostructures";
Talk: 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Novi Sad; 03-18-2013 - 03-22-2013.

F. Toth, F. G. Rammerstorfer:
"Dynamic Modelling of an Offshore Platform Supported by Flexible Air Cushions";
Talk: Computational Methods in Marine Engineering MARINE 2013, Hamburg; 05-29-2013 - 05-31-2013.

F. Toth, F. G. Rammerstorfer:
"FSI-Induced Instabilities of Air Chambers in Floating Solar Energy Platforms - Modelling and Experiment";
Keynote Lecture: Vth International Conference on Coupled Problems in Science and Engineering, Santa Eulària, Ibiza (invited); 06-17-2013 - 06-19-2013.

B. Daum, F. G. Rammerstorfer:
"Buckling of Lamellae in an Elastic Plastic Matrix";
Talk: 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM 2013), Montréal; 07-23-2013 - 07-26-2013.

I.C. Skrna-Jakl, D. H. Pahr, F. G. Rammerstorfer:
"Computational Design of Large Scale Corrugated Core Sandwich Structures Employing a Multiscale Analysis Concept";
Talk: Seminar des Instituts für Mechanik, TU Berlin, Berlin; 09-18-2013.

I.C. Skrna-Jakl, D. H. Pahr, K.H. Karner, F. G. Rammerstorfer:
"Homogenization Technique for the Efficient Modeling of Large Scale Corrugated Core Sandwich Structures";
Talk: 4th International Conference on Applied Physics and Mathematics (ICAPM 2104), Singapore; 02-19-2014 - 02-20-2014.

F. Toth, A. Wiesinger, M.J. Cordill, V.M. Marx, F. G. Rammerstorfer:
"Computational Simulation of Cracking and Buckling of Thin Metallic Films on Polymer Substrate under Tensile Loading";
Talk: Flex Workshop "Mechanical Issues for Flexible Electronics", Leoben; 04-10-2014 - 04-11-2014.

M. Bartosik, D. Holec, M. Todt, F. G. Rammerstorfer, P.H. Mayrhofer:
"Thermal Expansion and Elasticity of Metastable Cubic B1-AlN";
Talk: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, CA; 04-28-2014 - 05-02-2014.


Patents


F.D. Fischer, F. G. Rammerstorfer, H. Sattler, G. Gigl:
"Schadens-Akkumulator";
Patent: Österreich, No. 387.464; submitted: 1982, granted: 1983.

M. Haider, F. G. Rammerstorfer, H. J. Böhm, C. Diendorfer, F. Toth:
"Anordnung von Schwimmplattformen";
Patent: Österreich, No. A 1027/2011; submitted: 07-13-2011.

M. Haider, F. G. Rammerstorfer, H. J. Böhm, C. Diendorfer, F. Toth:
"Schwimmplattform";
Patent: Östereich, No. A 1028/2011; submitted: 07-13-2011.


Scientific Reports


R.B. Stewart, F. Marketz, W.C.M. Lohbeck, F.D. Fischer, W. Daves, F. G. Rammerstorfer, H. J. Böhm:
"Expandable Wellbore Tubulars";
Report for Shell International Exploration and Production B.V.; Report No. SIEP 99-5628, 1999.

N. Friedl, F.D. Fischer, F. G. Rammerstorfer:
"Ergänzungen zum Bericht: Untersuchung der Welligkeit von dünnen Blechbändern";
Report for BWG Düsseldorf; 2002.

N. Friedl, F. G. Rammerstorfer:
"Spannungsauswertung in eigenspannungsbehafteten Endlosbändern bei Reduktion der Vorspannung im bereits gebeulten Zustand";
Report for BWG Düsseldorf; 2002.

D. H. Pahr, F. G. Rammerstorfer:
"Numerische Auswertung des Steifigkeits- und Festigkeitsverhaltens gelochter Faserverbundlaminate";
Report for Hochschuljubiläumsstiftung der Stadt Wien; 2002.

F.G. Sander, F. G. Rammerstorfer, Y.I. Nyashin, E.Y. Simanovskaja:
"Development of the Biomechanical Fundamentals of the Human Orthodontic Treatment";
Report for INTAS, Brüssel; 2002.

F. G. Rammerstorfer, F.D. Fischer, N. Friedl:
"Untersuchungen von eigenspannungsbehafteten Bändern bei Erwärmung und temperaturabhängigen Werkstoffeigenschaften - Sufe 1 im Projekt "Bandplanheit nach dem Durchzugsglühen von Stahlband"";
Report for Böhler Ybbstal Band; 2003.

F.D. Fischer, E.R. Oberaigner, F. G. Rammerstorfer, T. Daxner:
"Flaring of a Tube - Analytical Approach";
Report for Shell International Exploration and Production BV, Den Haag; 2004.

A. Wiesinger, F. Toth, F. G. Rammerstorfer:
"Simulation of Crack Formation in Thin Copper Films on Polyimide Substrate";
Report for Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Report No. ILSB-Report 285, 2014; 39 pages.